[PATCH 14/36] scsi: mpt3sas: mpt3sas_scs: Fix a few kernel-doc issues

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fixes the following W=1 kernel build warning(s):

 drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: Function parameter or member 'sas_address' not described in '__mpt3sas_get_sdev_by_addr'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: expecting prototype for mpt3sas_get_sdev_by_addr(). Prototype was for __mpt3sas_get_sdev_by_addr() instead
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:4535: warning: expecting prototype for _scsih_check_for_pending_internal_cmds(). Prototype was for mpt3sas_check_for_pending_internal_cmds() instead
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'port_entry' not described in '_scsih_look_and_get_matched_port_entry'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'matched_port_entry' not described in '_scsih_look_and_get_matched_port_entry'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'count' not described in '_scsih_look_and_get_matched_port_entry'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:6959: warning: Function parameter or member 'port' not described in 'mpt3sas_expander_remove'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:10494: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_pre_reset_handler() instead
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:10536: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_reset_done_handler() instead
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:12303: warning: expecting prototype for scsih__ncq_prio_supp(). Prototype was for scsih_ncq_prio_supp() instead

Cc: Sathya Prakash <sathya.prakash@xxxxxxxxxxxx>
Cc: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@xxxxxxxxxxxx>
Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxx>
Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Cc: MPT-FusionLinux.pdl@xxxxxxxxxxxxx
Cc: MPT-FusionLinux.pdl@xxxxxxxxxxxx
Cc: linux-scsi@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 945531e94d7e4..23ecf2750ec79 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -749,9 +749,10 @@ __mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc,
 }
 
 /**
- * mpt3sas_get_sdev_by_addr - get _sas_device object corresponding to provided
+ * __mpt3sas_get_sdev_by_addr - get _sas_device object corresponding to provided
  *				sas address from sas_device_list list
  * @ioc: per adapter object
+ * @sas_address: device sas address
  * @port: port number
  *
  * Search for _sas_device object corresponding to provided sas address,
@@ -4518,7 +4519,7 @@ _scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER *ioc,
 }
 
 /**
- * _scsih_check_for_pending_internal_cmds - check for pending internal messages
+ * mpt3sas_check_for_pending_internal_cmds - check for pending internal messages
  * @ioc: per adapter object
  * @smid: system request message index
  *
@@ -6174,10 +6175,10 @@ enum hba_port_matched_codes {
  * _scsih_look_and_get_matched_port_entry - Get matched hba port entry
  *					from HBA port table
  * @ioc: per adapter object
- * @port_entry - hba port entry from temporary port table which needs to be
+ * @port_entry: hba port entry from temporary port table which needs to be
  *		searched for matched entry in the HBA port table
- * @matched_port_entry - save matched hba port entry here
- * @count - count of matched entries
+ * @matched_port_entry: save matched hba port entry here
+ * @count: count of matched entries
  *
  * return type of matched entry found.
  */
@@ -6952,6 +6953,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
  * mpt3sas_expander_remove - removing expander object
  * @ioc: per adapter object
  * @sas_address: expander sas_address
+ * @port: hba port entry
  */
 void
 mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
@@ -10487,7 +10489,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 }
 
 /**
- * mpt3sas_scsih_reset_handler - reset callback handler (for scsih)
+ * mpt3sas_scsih_pre_reset_handler - reset callback handler (for scsih)
  * @ioc: per adapter object
  *
  * The handler for doing any required cleanup or initialization.
@@ -10528,7 +10530,7 @@ mpt3sas_scsih_clear_outstanding_scsi_tm_commands(struct MPT3SAS_ADAPTER *ioc)
 }
 
 /**
- * mpt3sas_scsih_reset_handler - reset callback handler (for scsih)
+ * mpt3sas_scsih_reset_done_handler - reset callback handler (for scsih)
  * @ioc: per adapter object
  *
  * The handler for doing any required cleanup or initialization.
@@ -12295,7 +12297,7 @@ scsih_pci_mmio_enabled(struct pci_dev *pdev)
 }
 
 /**
- * scsih__ncq_prio_supp - Check for NCQ command priority support
+ * scsih_ncq_prio_supp - Check for NCQ command priority support
  * @sdev: scsi device struct
  *
  * This is called when a user indicates they would like to enable
-- 
2.27.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux