Re: [PATCH v29 4/4] scsi: ufs: Add HPB 2.0 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-03-15 15:07, Daejun Park wrote:
This patch supports the HPB 2.0.

The HPB 2.0 supports read of varying sizes from 4KB to 512KB.
In the case of Read (<= 32KB) is supported as single HPB read.
In the case of Read (36KB ~ 512KB) is supported by as a combination of
write buffer command and HPB read command to deliver more PPN.
The write buffer commands may not be issued immediately due to busy
tags.
To use HPB read more aggressively, the driver can requeue the write
buffer
command. The requeue threshold is implemented as timeout and can be
modified with requeue_timeout_ms entry in sysfs.

Signed-off-by: Daejun Park <daejun7.park@xxxxxxxxxxx>
---
+static struct attribute *hpb_dev_param_attrs[] = {
+        &dev_attr_requeue_timeout_ms.attr,
+        NULL,
+};
+
+struct attribute_group ufs_sysfs_hpb_param_group = {
+        .name = "hpb_param_sysfs",
+        .attrs = hpb_dev_param_attrs,
+};
+
+static int ufshpb_pre_req_mempool_init(struct ufshpb_lu *hpb)
+{
+        struct ufshpb_req *pre_req = NULL;
+        int qd = hpb->sdev_ufs_lu->queue_depth / 2;
+        int i, j;
+
+        INIT_LIST_HEAD(&hpb->lh_pre_req_free);
+
+ hpb->pre_req = kcalloc(qd, sizeof(struct ufshpb_req), GFP_KERNEL);
+        hpb->throttle_pre_req = qd;
+        hpb->num_inflight_pre_req = 0;
+
+        if (!hpb->pre_req)
+                goto release_mem;
+
+        for (i = 0; i < qd; i++) {
+                pre_req = hpb->pre_req + i;
+                INIT_LIST_HEAD(&pre_req->list_req);
+                pre_req->req = NULL;
+                pre_req->bio = NULL;

Why don't prepare bio as same as wb.m_page? Won't that save more time
for ufshpb_issue_pre_req()?

It is pre_req pool. So although we prepare bio at this time, it just
only for first pre_req.

I meant removing the bio_alloc() in ufshpb_issue_pre_req() and bio_put()
in ufshpb_pre_req_compl_fn(). bios, in pre_req's case, just hold a page.
So, prepare 16 (if queue depth is 32) bios here, just use them along with wb.m_page and call bio_reset() in ufshpb_pre_req_compl_fn(). Shall it work?

Thanks,
Can Guo.

After use it, it should be prepared bio at issue phase.

Thanks,
Daejun


Thanks,
Can Guo.

+
+ pre_req->wb.m_page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+                if (!pre_req->wb.m_page) {
+                        for (j = 0; j < i; j++)
+ __free_page(hpb->pre_req[j].wb.m_page);
+
+                        goto release_mem;
+                }
+ list_add_tail(&pre_req->list_req, &hpb->lh_pre_req_free);
+        }
+
+        return 0;
+release_mem:
+        kfree(hpb->pre_req);
+        return -ENOMEM;
+}
+






[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux