[PATCH 27/30] scsi: myrs: Remove a couple of unused 'status' variables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fixes the following W=1 kernel build warning(s):

 drivers/scsi/myrs.c: In function ‘consistency_check_show’:
 drivers/scsi/myrs.c:1193:16: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/myrs.c: In function ‘myrs_get_resync’:
 drivers/scsi/myrs.c:1984:5: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]

Cc: Hannes Reinecke <hare@xxxxxxxxxx>
Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxx>
Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Cc: Linux GmbH <hare@xxxxxxxx>
Cc: "Leonard N. Zubkoff" <lnz@xxxxxxxxxxxxx>
Cc: linux-scsi@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
 drivers/scsi/myrs.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
index 4adf9ded296aa..48e399f057d5c 100644
--- a/drivers/scsi/myrs.c
+++ b/drivers/scsi/myrs.c
@@ -1190,7 +1190,6 @@ static ssize_t consistency_check_show(struct device *dev,
 	struct myrs_hba *cs = shost_priv(sdev->host);
 	struct myrs_ldev_info *ldev_info;
 	unsigned short ldev_num;
-	unsigned char status;
 
 	if (sdev->channel < cs->ctlr_info->physchan_present)
 		return snprintf(buf, 32, "physical device - not checking\n");
@@ -1199,7 +1198,7 @@ static ssize_t consistency_check_show(struct device *dev,
 	if (!ldev_info)
 		return -ENXIO;
 	ldev_num = ldev_info->ldev_num;
-	status = myrs_get_ldev_info(cs, ldev_num, ldev_info);
+	myrs_get_ldev_info(cs, ldev_num, ldev_info);
 	if (ldev_info->cc_active)
 		return snprintf(buf, 32, "checking block %zu of %zu\n",
 				(size_t)ldev_info->cc_lba,
@@ -1981,14 +1980,13 @@ myrs_get_resync(struct device *dev)
 	struct myrs_hba *cs = shost_priv(sdev->host);
 	struct myrs_ldev_info *ldev_info = sdev->hostdata;
 	u64 percent_complete = 0;
-	u8 status;
 
 	if (sdev->channel < cs->ctlr_info->physchan_present || !ldev_info)
 		return;
 	if (ldev_info->rbld_active) {
 		unsigned short ldev_num = ldev_info->ldev_num;
 
-		status = myrs_get_ldev_info(cs, ldev_num, ldev_info);
+		myrs_get_ldev_info(cs, ldev_num, ldev_info);
 		percent_complete = ldev_info->rbld_lba * 100;
 		do_div(percent_complete, ldev_info->cfg_devsize);
 	}
-- 
2.27.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux