[PATCH][next] scsi: mpt3sas: Replace unnecessary dynamic allocation with a static one

["Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>]

Dynamic memory allocation isn't actually needed and it can be
replaced by statically allocating memory for struct object
io_unit_pg3 with 36 hardcoded entries for its GPIOVal array.

Also, this helps the with ongoing efforts to enable -Warray-bounds
by fixing the following warning:

drivers/scsi/mpt3sas/mpt3sas_ctl.c: In function ‘BRM_status_show’:
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:63: warning: array subscript 24 is above array bounds of ‘U16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
 3257 |  backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
./include/uapi/linux/byteorder/little_endian.h:36:51: note: in definition of macro ‘__le16_to_cpu’
   36 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
      |                                                   ^
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:31: note: in expansion of macro ‘le16_to_cpu’
 3257 |  backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);

Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/202103101058.16ED27BE3@keescook/
Reviewed-by: Kees Cook <keescook@xxxxxxxxxxxx>
Signed-off-by: Gustavo A. R. Silva <gustavoars@xxxxxxxxxx>
---
 drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h |  2 +-
 drivers/scsi/mpt3sas/mpt3sas_ctl.c   | 24 ++++++++----------------
 2 files changed, 9 insertions(+), 17 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index 43a3bf8ff428..d00431f553e1 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -992,7 +992,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
  *one and check the value returned for GPIOCount at runtime.
  */
 #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
-#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX    (1)
+#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX    (36)
 #endif
 
 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 {
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 44f9a05db94e..bc56e058a523 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -3203,7 +3203,7 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr,
 {
 	struct Scsi_Host *shost = class_to_shost(cdev);
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
-	Mpi2IOUnitPage3_t *io_unit_pg3 = NULL;
+	Mpi2IOUnitPage3_t io_unit_pg3;
 	Mpi2ConfigReply_t mpi_reply;
 	u16 backup_rail_monitor_status = 0;
 	u16 ioc_status;
@@ -3220,17 +3220,10 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr,
 	if (ioc->pci_error_recovery || ioc->remove_host)
 		goto out;
 
-	/* allocate upto GPIOVal 36 entries */
-	sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36);
-	io_unit_pg3 = kzalloc(sz, GFP_KERNEL);
-	if (!io_unit_pg3) {
-		rc = -ENOMEM;
-		ioc_err(ioc, "%s: failed allocating memory for iounit_pg3: (%d) bytes\n",
-			__func__, sz);
-		goto out;
-	}
+	sz = sizeof(io_unit_pg3);
+	memset(&io_unit_pg3, 0, sz);
 
-	if (mpt3sas_config_get_iounit_pg3(ioc, &mpi_reply, io_unit_pg3, sz) !=
+	if (mpt3sas_config_get_iounit_pg3(ioc, &mpi_reply, &io_unit_pg3, sz) !=
 	    0) {
 		ioc_err(ioc, "%s: failed reading iounit_pg3\n",
 			__func__);
@@ -3246,19 +3239,18 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr,
 		goto out;
 	}
 
-	if (io_unit_pg3->GPIOCount < 25) {
-		ioc_err(ioc, "%s: iounit_pg3->GPIOCount less than 25 entries, detected (%d) entries\n",
-			__func__, io_unit_pg3->GPIOCount);
+	if (io_unit_pg3.GPIOCount < 25) {
+		ioc_err(ioc, "%s: iounit_pg3.GPIOCount less than 25 entries, detected (%d) entries\n",
+			__func__, io_unit_pg3.GPIOCount);
 		rc = -EINVAL;
 		goto out;
 	}
 
 	/* BRM status is in bit zero of GPIOVal[24] */
-	backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
+	backup_rail_monitor_status = le16_to_cpu(io_unit_pg3.GPIOVal[24]);
 	rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1));
 
  out:
-	kfree(io_unit_pg3);
 	mutex_unlock(&ioc->pci_access_mutex);
 	return rc;
 }
-- 
2.27.0