From: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx> [ Upstream commit b1d0d2eb89d4e3a25b212a9d836587503537067e ] The UniPro specification states that attribute IDs of the following parameters are vendor-specific so some SoCs could have no regions at the defined addresses: - DME_LocalFC0ProtectionTimeOutVal - DME_LocalTC0ReplayTimeOutVal - DME_LocalAFC0ReqTimeOutVal In addition, the following parameters should be set considering the compatibility between host and device. - PA_PWRMODEUSERDATA0 - PA_PWRMODEUSERDATA1 - PA_PWRMODEUSERDATA2 - PA_PWRMODEUSERDATA3 - PA_PWRMODEUSERDATA4 - PA_PWRMODEUSERDATA5 Introduce a quirk to allow vendor drivers to override the UniPro defaults. Link: https://lore.kernel.org/r/1fedd3dea0ccc980913a5995a10510d86a5b01b9.1608513782.git.kwmad.kim@xxxxxxxxxxx Acked-by: Avri Altman <Avri.Altman@xxxxxxx> Signed-off-by: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/ufs/ufshcd.c | 40 ++++++++++++++++++++------------------- drivers/scsi/ufs/ufshcd.h | 6 ++++++ 2 files changed, 27 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 813289328467..379d44d6b9eb 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -4153,25 +4153,27 @@ static int ufshcd_change_power_mode(struct ufs_hba *hba, ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), pwr_mode->hs_rate); - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA0), - DL_FC0ProtectionTimeOutVal_Default); - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA1), - DL_TC0ReplayTimeOutVal_Default); - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA2), - DL_AFC0ReqTimeOutVal_Default); - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA3), - DL_FC1ProtectionTimeOutVal_Default); - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA4), - DL_TC1ReplayTimeOutVal_Default); - ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA5), - DL_AFC1ReqTimeOutVal_Default); - - ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalFC0ProtectionTimeOutVal), - DL_FC0ProtectionTimeOutVal_Default); - ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalTC0ReplayTimeOutVal), - DL_TC0ReplayTimeOutVal_Default); - ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalAFC0ReqTimeOutVal), - DL_AFC0ReqTimeOutVal_Default); + if (!(hba->quirks & UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING)) { + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA0), + DL_FC0ProtectionTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA1), + DL_TC0ReplayTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA2), + DL_AFC0ReqTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA3), + DL_FC1ProtectionTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA4), + DL_TC1ReplayTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA5), + DL_AFC1ReqTimeOutVal_Default); + + ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalFC0ProtectionTimeOutVal), + DL_FC0ProtectionTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalTC0ReplayTimeOutVal), + DL_TC0ReplayTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalAFC0ReqTimeOutVal), + DL_AFC0ReqTimeOutVal_Default); + } ret = ufshcd_uic_change_pwr_mode(hba, pwr_mode->pwr_rx << 4 | pwr_mode->pwr_tx); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 6c62a281c863..fcca4e15c8cd 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -544,6 +544,12 @@ enum ufshcd_quirks { */ UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL = 1 << 12, + /* + * This quirk needs to disable unipro timeout values + * before power mode change + */ + UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13, + }; enum ufshcd_caps { -- 2.30.1
