When the NO_DXFER flag is use on a command/request, the data-in
and data-out buffers (if present) should not be ignored. Add
sg_rq_map_kern() function to handle this. Uses a single bio with
multiple bvec_s usually each holding multiple pages, if necessary.
The driver default element size is 32 KiB so if PAGE_SIZE is 4096
then get_order()==3 .
Signed-off-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
---
drivers/scsi/sg.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index f33c32626a4e..10c0c3ff4435 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -2862,6 +2862,63 @@ exit_sg(void)
idr_destroy(&sg_index_idr);
}
+static struct bio *
+sg_mk_kern_bio(int bvec_cnt)
+{
+ struct bio *biop;
+
+ if (bvec_cnt > BIO_MAX_PAGES)
+ return NULL;
+ biop = bio_alloc(GFP_ATOMIC, bvec_cnt);
+ if (!biop)
+ return NULL;
+ biop->bi_end_io = bio_put;
+ return biop;
+}
+
+/*
+ * Setup to move data between kernel buffers managed by this driver and a SCSI device. Note that
+ * there is no corresponding 'unmap' call as is required by blk_rq_map_user() . Uses a single
+ * bio with an expanded appended bvec if necessary.
+ */
+static int
+sg_rq_map_kern(struct sg_request *srp, struct request_queue *q, struct request *rqq, int rw_ind)
+{
+ struct sg_scatter_hold *schp = &srp->sgat_h;
+ struct bio *bio;
+ int k, ln;
+ int op_flags = 0;
+ int num_sgat = schp->num_sgat;
+ int dlen = schp->dlen;
+ int pg_sz = 1 << (PAGE_SHIFT + schp->page_order);
+ int num_segs = (1 << schp->page_order) * num_sgat;
+ int res = 0;
+
+ SG_LOG(4, srp->parentfp, "%s: dlen=%d, pg_sz=%d\n", __func__, dlen, pg_sz);
+ if (num_sgat <= 0)
+ return 0;
+ if (rw_ind == WRITE)
+ op_flags = REQ_SYNC | REQ_IDLE;
+ bio = sg_mk_kern_bio(num_sgat - k);
+ if (!bio)
+ return -ENOMEM;
+ bio->bi_opf = req_op(rqq) | op_flags;
+
+ for (k = 0; k < num_sgat && dlen > 0; ++k, dlen -= ln) {
+ ln = min_t(int, dlen, pg_sz);
+ if (bio_add_pc_page(q, bio, schp->pages[k], ln, 0) < ln) {
+ bio_put(bio);
+ return -EINVAL;
+ }
+ }
+ res = blk_rq_append_bio(rqq, &bio);
+ if (unlikely(res))
+ bio_put(bio);
+ else
+ rqq->nr_phys_segments = num_segs;
+ return res;
+}
+
static inline void
sg_set_map_data(const struct sg_scatter_hold *schp, bool up_valid,
struct rq_map_data *mdp)
@@ -3025,6 +3082,8 @@ sg_start_req(struct sg_request *srp, struct sg_comm_wr_t *cwrp, int dxfer_dir)
if (IS_ENABLED(CONFIG_SCSI_PROC_FS) && res)
SG_LOG(1, sfp, "%s: blk_rq_map_user() res=%d\n",
__func__, res);
+ } else { /* transfer data to/from kernel buffers */
+ res = sg_rq_map_kern(srp, q, rq, r0w);
}
fini:
if (unlikely(res)) { /* failure, free up resources */
--
2.25.1
