[PATCH AUTOSEL 4.4 2/4] scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Can Guo <cang@xxxxxxxxxxxxxx>

[ Upstream commit 35fc4cd34426c242ab015ef280853b7bff101f48 ]

Users can initiate resets to specific SCSI device/target/host through
IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host
_reset_handler() callbacks is initialized with a request whose tag is -1.
In this case it is not right for eh_device_reset_handler() callback to
count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI
device associated with the SCSI cmd.

Link: https://lore.kernel.org/r/1609157080-26283-1-git-send-email-cang@xxxxxxxxxxxxxx
Reviewed-by: Avri Altman <avri.altman@xxxxxxx>
Reviewed-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/ufs/ufshcd.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index e37f6db0dd156..5e1d922e9a6ff 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -3818,19 +3818,16 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
 {
 	struct Scsi_Host *host;
 	struct ufs_hba *hba;
-	unsigned int tag;
 	u32 pos;
 	int err;
-	u8 resp = 0xF;
-	struct ufshcd_lrb *lrbp;
+	u8 resp = 0xF, lun;
 	unsigned long flags;
 
 	host = cmd->device->host;
 	hba = shost_priv(host);
-	tag = cmd->request->tag;
 
-	lrbp = &hba->lrb[tag];
-	err = ufshcd_issue_tm_cmd(hba, lrbp->lun, 0, UFS_LOGICAL_RESET, &resp);
+	lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
+	err = ufshcd_issue_tm_cmd(hba, lun, 0, UFS_LOGICAL_RESET, &resp);
 	if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) {
 		if (!err)
 			err = resp;
@@ -3839,7 +3836,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
 
 	/* clear the commands that were pending for corresponding LUN */
 	for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs) {
-		if (hba->lrb[pos].lun == lrbp->lun) {
+		if (hba->lrb[pos].lun == lun) {
 			err = ufshcd_clear_cmd(hba, pos);
 			if (err)
 				break;
-- 
2.27.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux