Dear Martin, dear John, dear Don, dear Linux folks,
Am 19.01.21 um 15:12 schrieb Martin Wilck:
On Tue, 2021-01-19 at 10:33 +0000, John Garry wrote:
Am 10.12.20 um 21:35 schrieb Don Brace:
From: Mahesh Rajashekhara <mahesh.rajashekhara@xxxxxxxxxxxxx>
* Correct scsi-mid-layer sending more requests than
exposed host Q depth causing firmware ASSERT issue.
* Add host Qdepth counter.
This supposedly fixes the regression between Linux 5.4 and 5.9,
which we reported in [1].
kernel: smartpqi 0000:89:00.0: controller is offline: status code 0x6100c
kernel: smartpqi 0000:89:00.0: controller offline
Thank you for looking into this issue and fixing it. We are going
to test this.
For easily finding these things in the git history or the WWW, it
would be great if these log messages could be included (in the
future).
DON> Thanks for your suggestion. Well add them in the next time.
Also, that means, that the regression is still present in Linux
5.10, released yesterday, and this commit does not apply to these
versions.
DON> They have started 5.10-RC7 now. So possibly 5.11 or 5.12
depending when all of the patches are applied. The patch in
question is among 28 other patches.
Mahesh, do you have any idea, what commit caused the regression
and why the issue started to show up?
DON> The smartpqi driver sets two scsi_host_template member
fields:
.can_queue and .nr_hw_queues. But we have not yet converted to
host_tagset. So the queue_depth becomes nr_hw_queues * can_queue,
which is more than the hw can support. That can be verified by
looking at scsi_host.h.
/*
* In scsi-mq mode, the number of hardware queues supported by the LLD.
*
* Note: it is assumed that each hardware queue has a queue depth of
* can_queue. In other words, the total queue depth per host
* is nr_hw_queues * can_queue. However, for when host_tagset is set,
* the total queue depth is can_queue.
*/
So, until we make this change, the queue_depth change prevents
the above issue from happening.
can_queue and nr_hw_queues have been set like this as long as the
driver existed. Why did Paul observe a regression with 5.9?
And why can't you simply set can_queue to (ctrl_info-
scsi_ml_can_queue / nr_hw_queues)?
Don: I did this in an internal patch, but this patch seemed to work
the best for our driver. HBA performance remained steady when
running benchmarks.
That was a stupid suggestion on my part. Sorry.
I guess that this is a fallout from commit 6eb045e092ef ("scsi:
core: avoid host-wide host_busy counter for scsi_mq"). But that
commit is correct.
John, thank you very much for taking the time to point this out. The
commit showed first up in Linux 5.5-rc1. (The host template flog
`host_tagset` was introduced in Linux 5.10-rc1.)
It would be good if someone (Paul?) could verify whether that commit
actually caused the regression they saw.
Looking at that 6eb045e092ef, I notice this hunk:
- busy = atomic_inc_return(&shost->host_busy) - 1;
if (atomic_read(&shost->host_blocked) > 0) {
- if (busy)
+ if (scsi_host_busy(shost) > 0)
goto starved;
Before 6eb045e092ef, the busy count was incremented with membarrier
before looking at "host_blocked". The new code does this instead:
@ -1403,6 +1400,8 @@ static inline int scsi_host_queue_ready(struct request_queue *q,
spin_unlock_irq(shost->host_lock);
}
+ __set_bit(SCMD_STATE_INFLIGHT, &cmd->state);
+
but it happens *after* the "host_blocked" check. Could that perhaps
have caused the regression?
As we only have production systems with this issue, and Don wrote the
Microchip team was able to reproduce the issue, it’d be great, if Don
and his team, could test, if commit 6eb045e092ef introduced the regression.
Also, we still need a path forward how to fix this for the Linux 5.10
series. Due to the issue dragging on for so long, the 5.9 series has
reached end of life already.
Kind regards,
Paul
