[PATCH v3 10/19] scsi: aic94xx: Pass gfp_t flags to libsas event notifiers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.

Context analysis:

  aic94xx_hwi.c: asd_dl_tasklet_handler()
    -> asd_ascb::tasklet_complete()
    == escb_tasklet_complete()
      -> aic94xx_scb.c: asd_phy_event_tasklet()
      -> aic94xx_scb.c: asd_bytes_dmaed_tasklet()
      -> aic94xx_scb.c: asd_link_reset_err_tasklet()
      -> aic94xx_scb.c: asd_primitive_rcvd_tasklet()

All functions are invoked by escb_tasklet_complete(), which is invoked
by the tasklet handler. Pass GFP_ATOMIC.

Signed-off-by: Ahmed S. Darwish <a.darwish@xxxxxxxxxxxxx>
Reviewed-by: John Garry <john.garry@xxxxxxxxxx>
---
 drivers/scsi/aic94xx/aic94xx_scb.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index 770546177ca4..76a4c21144d8 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -80,7 +80,8 @@ static void asd_phy_event_tasklet(struct asd_ascb *ascb,
 		ASD_DPRINTK("phy%d: device unplugged\n", phy_id);
 		asd_turn_led(asd_ha, phy_id, 0);
 		sas_phy_disconnected(&phy->sas_phy);
-		sas_notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+		sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL,
+					 GFP_ATOMIC);
 		break;
 	case CURRENT_OOB_DONE:
 		/* hot plugged device */
@@ -88,12 +89,14 @@ static void asd_phy_event_tasklet(struct asd_ascb *ascb,
 		get_lrate_mode(phy, oob_mode);
 		ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n",
 			    phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto);
-		sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+		sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_OOB_DONE,
+					 GFP_ATOMIC);
 		break;
 	case CURRENT_SPINUP_HOLD:
 		/* hot plug SATA, no COMWAKE sent */
 		asd_turn_led(asd_ha, phy_id, 1);
-		sas_notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+		sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_SPINUP_HOLD,
+					 GFP_ATOMIC);
 		break;
 	case CURRENT_GTO_TIMEOUT:
 	case CURRENT_OOB_ERROR:
@@ -101,7 +104,8 @@ static void asd_phy_event_tasklet(struct asd_ascb *ascb,
 			    dl->status_block[1]);
 		asd_turn_led(asd_ha, phy_id, 0);
 		sas_phy_disconnected(&phy->sas_phy);
-		sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+		sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_OOB_ERROR,
+					 GFP_ATOMIC);
 		break;
 	}
 }
@@ -232,7 +236,7 @@ static void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
 	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
 	asd_dump_frame_rcvd(phy, dl);
 	asd_form_port(ascb->ha, phy);
-	sas_notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED);
+	sas_notify_port_event_gfp(&phy->sas_phy, PORTE_BYTES_DMAED, GFP_ATOMIC);
 }
 
 static void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
@@ -268,7 +272,7 @@ static void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
 	asd_turn_led(asd_ha, phy_id, 0);
 	sas_phy_disconnected(sas_phy);
 	asd_deform_port(asd_ha, phy);
-	sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+	sas_notify_port_event_gfp(sas_phy, PORTE_LINK_RESET_ERR, GFP_ATOMIC);
 
 	if (retries_left == 0) {
 		int num = 1;
@@ -313,7 +317,8 @@ static void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
 			spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
 			sas_phy->sas_prim = ffs(cont);
 			spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
-			sas_notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+			sas_notify_port_event_gfp(sas_phy, PORTE_BROADCAST_RCVD,
+						  GFP_ATOMIC);
 			break;
 
 		case LmUNKNOWNP:
@@ -334,7 +339,8 @@ static void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
 			/* The sequencer disables all phys on that port.
 			 * We have to re-enable the phys ourselves. */
 			asd_deform_port(asd_ha, phy);
-			sas_notify_port_event(sas_phy, PORTE_HARD_RESET);
+			sas_notify_port_event_gfp(sas_phy, PORTE_HARD_RESET,
+						  GFP_ATOMIC);
 			break;
 
 		default:
@@ -565,7 +571,8 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 		/* the device is gone */
 		sas_phy_disconnected(sas_phy);
 		asd_deform_port(asd_ha, phy);
-		sas_notify_port_event(sas_phy, PORTE_TIMER_EVENT);
+		sas_notify_port_event_gfp(sas_phy, PORTE_TIMER_EVENT,
+					  GFP_ATOMIC);
 		break;
 	default:
 		ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __func__,
-- 
2.30.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux