Nine minor fixes, 7 in drivers and 2 in the core SCSI disk driver (sd)
which should be harmless involving removing an unused variable and
quietening a spurious warning.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Can Guo (1):
scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback
Colin Ian King (1):
scsi: mpt3sas: Fix spelling mistake in Kconfig "compatiblity" -> "compatibility"
Dinghao Liu (1):
scsi: scsi_debug: Fix memleak in scsi_debug_init()
Ewan D. Milne (1):
scsi: sd: Suppress spurious errors when WRITE SAME is being disabled
Kiwoong Kim (1):
scsi: ufs: Relocate flush of exceptional event
Lukas Bulwahn (1):
scsi: sd: Remove obsolete variable in sd_remove()
Nilesh Javali (1):
scsi: qedi: Correct max length of CHAP secret
Stanley Chu (2):
scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL
scsi: ufs: Fix possible power drain during system suspend
And the diffstat:
drivers/scsi/mpt3sas/Kconfig | 2 +-
drivers/scsi/qedi/qedi_main.c | 4 ++--
drivers/scsi/scsi_debug.c | 5 +++--
drivers/scsi/sd.c | 6 +++---
drivers/scsi/ufs/ufshcd.c | 24 ++++++++++--------------
5 files changed, 19 insertions(+), 22 deletions(-)
With full diff below.
James
---
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
index 86209455172d..c299f7e078fb 100644
--- a/drivers/scsi/mpt3sas/Kconfig
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -79,5 +79,5 @@ config SCSI_MPT2SAS
select SCSI_MPT3SAS
depends on PCI && SCSI
help
- Dummy config option for backwards compatiblity: configure the MPT3SAS
+ Dummy config option for backwards compatibility: configure the MPT3SAS
driver instead.
diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c
index f5fc7f518f8a..47ad64b06623 100644
--- a/drivers/scsi/qedi/qedi_main.c
+++ b/drivers/scsi/qedi/qedi_main.c
@@ -2245,7 +2245,7 @@ qedi_show_boot_tgt_info(struct qedi_ctx *qedi, int type,
chap_name);
break;
case ISCSI_BOOT_TGT_CHAP_SECRET:
- rc = sprintf(buf, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
+ rc = sprintf(buf, "%.*s\n", NVM_ISCSI_CFG_CHAP_PWD_MAX_LEN,
chap_secret);
break;
case ISCSI_BOOT_TGT_REV_CHAP_NAME:
@@ -2253,7 +2253,7 @@ qedi_show_boot_tgt_info(struct qedi_ctx *qedi, int type,
mchap_name);
break;
case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
- rc = sprintf(buf, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
+ rc = sprintf(buf, "%.*s\n", NVM_ISCSI_CFG_CHAP_PWD_MAX_LEN,
mchap_secret);
break;
case ISCSI_BOOT_TGT_FLAGS:
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 24c0f7ec0351..4a08c450b756 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -6740,7 +6740,7 @@ static int __init scsi_debug_init(void)
k = sdeb_zbc_model_str(sdeb_zbc_model_s);
if (k < 0) {
ret = k;
- goto free_vm;
+ goto free_q_arr;
}
sdeb_zbc_model = k;
switch (sdeb_zbc_model) {
@@ -6753,7 +6753,8 @@ static int __init scsi_debug_init(void)
break;
default:
pr_err("Invalid ZBC model\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto free_q_arr;
}
}
if (sdeb_zbc_model != BLK_ZONED_NONE) {
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 679c2c025047..a3d2d4bc4a3d 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -984,8 +984,10 @@ static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
}
}
- if (sdp->no_write_same)
+ if (sdp->no_write_same) {
+ rq->rq_flags |= RQF_QUIET;
return BLK_STS_TARGET;
+ }
if (sdkp->ws16 || lba > 0xffffffff || nr_blocks > 0xffff)
return sd_setup_write_same16_cmnd(cmd, false);
@@ -3510,10 +3512,8 @@ static int sd_probe(struct device *dev)
static int sd_remove(struct device *dev)
{
struct scsi_disk *sdkp;
- dev_t devt;
sdkp = dev_get_drvdata(dev);
- devt = disk_devt(sdkp->disk);
scsi_autopm_get_device(sdkp->device);
async_synchronize_full_domain(&scsi_sd_pm_domain);
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 82ad31781bc9..e31d2c5c7b23 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -289,7 +289,8 @@ static inline void ufshcd_wb_config(struct ufs_hba *hba)
if (ret)
dev_err(hba->dev, "%s: En WB flush during H8: failed: %d\n",
__func__, ret);
- ufshcd_wb_toggle_flush(hba, true);
+ if (!(hba->quirks & UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL))
+ ufshcd_wb_toggle_flush(hba, true);
}
static void ufshcd_scsi_unblock_requests(struct ufs_hba *hba)
@@ -5436,9 +5437,6 @@ static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set)
static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable)
{
- if (hba->quirks & UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL)
- return;
-
if (enable)
ufshcd_wb_buf_flush_enable(hba);
else
@@ -6661,19 +6659,16 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
{
struct Scsi_Host *host;
struct ufs_hba *hba;
- unsigned int tag;
u32 pos;
int err;
- u8 resp = 0xF;
- struct ufshcd_lrb *lrbp;
+ u8 resp = 0xF, lun;
unsigned long flags;
host = cmd->device->host;
hba = shost_priv(host);
- tag = cmd->request->tag;
- lrbp = &hba->lrb[tag];
- err = ufshcd_issue_tm_cmd(hba, lrbp->lun, 0, UFS_LOGICAL_RESET, &resp);
+ lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
+ err = ufshcd_issue_tm_cmd(hba, lun, 0, UFS_LOGICAL_RESET, &resp);
if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) {
if (!err)
err = resp;
@@ -6682,7 +6677,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
/* clear the commands that were pending for corresponding LUN */
for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs) {
- if (hba->lrb[pos].lun == lrbp->lun) {
+ if (hba->lrb[pos].lun == lun) {
err = ufshcd_clear_cmd(hba, pos);
if (err)
break;
@@ -8698,6 +8693,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
ufshcd_wb_need_flush(hba));
}
+ flush_work(&hba->eeh_work);
+
if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
if (!ufshcd_is_runtime_pm(pm_op))
/* ensure that bkops is disabled */
@@ -8710,8 +8707,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
}
}
- flush_work(&hba->eeh_work);
-
/*
* In the case of DeepSleep, the device is expected to remain powered
* with the link off, so do not check for bkops.
@@ -8938,7 +8933,8 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
if ((ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl) ==
hba->curr_dev_pwr_mode) &&
(ufs_get_pm_lvl_to_link_pwr_state(hba->spm_lvl) ==
- hba->uic_link_state))
+ hba->uic_link_state) &&
+ !hba->dev_info.b_rpm_dev_flush_capable)
goto out;
if (pm_runtime_suspended(hba->dev)) {
