[PATCH] ibmvfc: Set default timeout to avoid crash during migration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



While testing live partition mobility, we have observed occasional
crashes of the Linux partition. What we've seen is that during
the live migration, for specific configurations with large amounts
of memory, slow network links, and workloads that are changing
memory a lot, the partition can end up being suspended for 30 seconds
or longer. This resulted in the following scenario:

CPU 0                          CPU 1
-------------------------------  ----------------------------------
scsi_queue_rq                    migration_store
 -> blk_mq_start_request          -> rtas_ibm_suspend_me
  -> blk_add_timer                 -> on_each_cpu(rtas_percpu_suspend_me
              _______________________________________V
             |
             V
    -> IPI from CPU 1
     -> rtas_percpu_suspend_me
                                     -> __rtas_suspend_last_cpu

-- Linux partition suspended for > 30 seconds --
                                      -> for_each_online_cpu(cpu)
                                           plpar_hcall_norets(H_PROD
 -> scsi_dispatch_cmd
                                      -> scsi_times_out
                                       -> scsi_abort_command
                                        -> queue_delayed_work
  -> ibmvfc_queuecommand_lck
   -> ibmvfc_send_event
    -> ibmvfc_send_crq
     - returns H_CLOSED
   <- returns SCSI_MLQUEUE_HOST_BUSY
-> __blk_mq_requeue_request

                                      -> scmd_eh_abort_handler
                                       -> scsi_try_to_abort_cmd
                                         - returns SUCCESS
                                       -> scsi_queue_insert

Normally, the SCMD_STATE_COMPLETE bit would protect against the
command completion and the timeout, but that doesn't work here,
since we don't check that at all in the SCSI_MLQUEUE_HOST_BUSY
path.

In this case we end up calling scsi_queue_insert on a request
that has already been queued, or possibly even freed, and
we crash.

The patch below simply increases the default I/O timeout to avoid
this race condition. This is also the timeout value that nearly
all IBM SAN storage recommends setting as the default value.

Signed-off-by: Brian King <brking@xxxxxxxxxxxxxxxxxx>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 42e4d35..79badaa 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3007,8 +3007,10 @@ static int ibmvfc_slave_configure(struct scsi_device *sdev)
 	unsigned long flags = 0;
 
 	spin_lock_irqsave(shost->host_lock, flags);
-	if (sdev->type == TYPE_DISK)
+	if (sdev->type == TYPE_DISK) {
 		sdev->allow_restart = 1;
+		blk_queue_rq_timeout(sdev->request_queue, 120 * HZ);
+	}
 	spin_unlock_irqrestore(shost->host_lock, flags);
 	return 0;
 }
-- 
1.8.3.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux