Re: [PATCH v3 1/2] scsi: ufs: fix livelock of ufshcd_clear_ua_wluns

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/07, Can Guo wrote:
> On 2021-01-07 05:41, Jaegeuk Kim wrote:
> > When gate_work/ungate_work gets an error during hibern8_enter or exit,
> >  ufshcd_err_handler()
> >    ufshcd_scsi_block_requests()
> >    ufshcd_reset_and_restore()
> >      ufshcd_clear_ua_wluns() -> stuck
> >    ufshcd_scsi_unblock_requests()
> > 
> > In order to avoid it, ufshcd_clear_ua_wluns() can be called per recovery
> > flows
> > such as suspend/resume, link_recovery, and error_handler.
> > 
> > Fixes: 1918651f2d7e ("scsi: ufs: Clear UAC for RPMB after ufshcd
> > resets")
> > Signed-off-by: Jaegeuk Kim <jaegeuk@xxxxxxxxxx>
> > ---
> >  drivers/scsi/ufs/ufshcd.c | 15 ++++++++++-----
> >  1 file changed, 10 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> > index bedb822a40a3..1678cec08b51 100644
> > --- a/drivers/scsi/ufs/ufshcd.c
> > +++ b/drivers/scsi/ufs/ufshcd.c
> > @@ -3996,6 +3996,8 @@ int ufshcd_link_recovery(struct ufs_hba *hba)
> >  	if (ret)
> >  		dev_err(hba->dev, "%s: link recovery failed, err %d",
> >  			__func__, ret);
> > +	else
> > +		ufshcd_clear_ua_wluns(hba);
> 
> Can we put it right after ufshcd_scsi_add_wlus() in ufshcd_add_lus()?

May I ask the reason? We'll call it after ufshcd_add_lus() later tho.

> 
> Thanks,
> Can Guo.
> 
> > 
> >  	return ret;
> >  }
> > @@ -6003,6 +6005,9 @@ static void ufshcd_err_handler(struct work_struct
> > *work)
> >  	ufshcd_scsi_unblock_requests(hba);
> >  	ufshcd_err_handling_unprepare(hba);
> >  	up(&hba->eh_sem);
> > +
> > +	if (!err && needs_reset)
> > +		ufshcd_clear_ua_wluns(hba);
> >  }
> > 
> >  /**
> > @@ -6940,14 +6945,11 @@ static int
> > ufshcd_host_reset_and_restore(struct ufs_hba *hba)
> >  	ufshcd_set_clk_freq(hba, true);
> > 
> >  	err = ufshcd_hba_enable(hba);
> > -	if (err)
> > -		goto out;
> > 
> >  	/* Establish the link again and restore the device */
> > -	err = ufshcd_probe_hba(hba, false);
> >  	if (!err)
> > -		ufshcd_clear_ua_wluns(hba);
> > -out:
> > +		err = ufshcd_probe_hba(hba, false);
> > +
> >  	if (err)
> >  		dev_err(hba->dev, "%s: Host init failed %d\n", __func__, err);
> >  	ufshcd_update_evt_hist(hba, UFS_EVT_HOST_RESET, (u32)err);
> > @@ -8777,6 +8779,7 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> > enum ufs_pm_op pm_op)
> >  		ufshcd_resume_clkscaling(hba);
> >  	hba->clk_gating.is_suspended = false;
> >  	hba->dev_info.b_rpm_dev_flush_capable = false;
> > +	ufshcd_clear_ua_wluns(hba);
> >  	ufshcd_release(hba);
> >  out:
> >  	if (hba->dev_info.b_rpm_dev_flush_capable) {
> > @@ -8887,6 +8890,8 @@ static int ufshcd_resume(struct ufs_hba *hba,
> > enum ufs_pm_op pm_op)
> >  		cancel_delayed_work(&hba->rpm_dev_flush_recheck_work);
> >  	}
> > 
> > +	ufshcd_clear_ua_wluns(hba);
> > +
> >  	/* Schedule clock gating in case of no access to UFS device yet */
> >  	ufshcd_release(hba);



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux