On 12/20/20 6:37 PM, Mike Christie wrote:
> We are setting the shost's can_queue after we add the host which is
> too late, because scsi-ml will have allocated the tag set based on
> the can_queue value at that time. This patch has us use the
> iscsi_host_get_max_scsi_cmds helper to figure out the number of
> scsi cmds, so we can set it properly. We should now not be limited
> to 128 cmds per session.
>
> It also fixes up the template can_queue so it reflects the max scsi
> cmds we can support like how other drivers work.
>
> Signed-off-by: Mike Christie <michael.christie@xxxxxxxxxx>
> ---
> drivers/scsi/iscsi_tcp.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
> index df47557..7a5aec7 100644
> --- a/drivers/scsi/iscsi_tcp.c
> +++ b/drivers/scsi/iscsi_tcp.c
> @@ -847,6 +847,7 @@ static int iscsi_sw_tcp_host_get_param(struct Scsi_Host *shost,
> struct iscsi_session *session;
> struct iscsi_sw_tcp_host *tcp_sw_host;
> struct Scsi_Host *shost;
> + int rc;
>
> if (ep) {
> printk(KERN_ERR "iscsi_tcp: invalid ep %p.\n", ep);
> @@ -864,6 +865,11 @@ static int iscsi_sw_tcp_host_get_param(struct Scsi_Host *shost,
> shost->max_channel = 0;
> shost->max_cmd_len = SCSI_MAX_VARLEN_CDB_SIZE;
>
> + rc = iscsi_host_get_max_scsi_cmds(shost, cmds_max);
> + if (rc < 0)
> + goto free_host;
Same question as in Patch 4: Is having "0" max scsi commands ok?
> + shost->can_queue = rc;
> +
> if (iscsi_host_add(shost, NULL))
> goto free_host;
>
> @@ -878,7 +884,6 @@ static int iscsi_sw_tcp_host_get_param(struct Scsi_Host *shost,
> tcp_sw_host = iscsi_host_priv(shost);
> tcp_sw_host->session = session;
>
> - shost->can_queue = session->scsi_cmds_max;
> if (iscsi_tcp_r2tpool_alloc(session))
> goto remove_session;
> return cls_session;
> @@ -981,7 +986,7 @@ static int iscsi_sw_tcp_slave_configure(struct scsi_device *sdev)
> .name = "iSCSI Initiator over TCP/IP",
> .queuecommand = iscsi_queuecommand,
> .change_queue_depth = scsi_change_queue_depth,
> - .can_queue = ISCSI_DEF_XMIT_CMDS_MAX - 1,
> + .can_queue = ISCSI_TOTAL_CMDS_MAX - ISCSI_MGMT_CMDS_MAX,
> .sg_tablesize = 4096,
> .max_sectors = 0xFFFF,
> .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
>
