Re: [PATCH RFC v4 1/1] scsi: ufs: Fix ufs power down/on specs violation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-01-05 02:57, Bjorn Andersson wrote:
On Mon 28 Dec 19:18 CST 2020, Can Guo wrote:

On 2020-12-29 01:55, Bjorn Andersson wrote:
> On Tue 22 Dec 07:49 CST 2020, Ziqi Chen wrote:
>
> > As per specs, e.g, JESD220E chapter 7.2, while powering
> > off/on the ufs device, RST_N signal and REF_CLK signal
> > should be between VSS(Ground) and VCCQ/VCCQ2.
> >
> > To flexibly control device reset line, refactor the function
> > ufschd_vops_device_reset(sturct ufs_hba *hba) to ufshcd_
> > vops_device_reset(sturct ufs_hba *hba, bool asserted). The
> > new parameter "bool asserted" is used to separate device reset
> > line pulling down from pulling up.
> >
> > Cc: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
> > Cc: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
> > Signed-off-by: Ziqi Chen <ziqichen@xxxxxxxxxxxxxx>
> > ---
> >  drivers/scsi/ufs/ufs-mediatek.c | 32 ++++++++++++++++----------------
> >  drivers/scsi/ufs/ufs-qcom.c     | 24 +++++++++++++++---------
> >  drivers/scsi/ufs/ufshcd.c       | 36
> > +++++++++++++++++++++++++-----------
> >  drivers/scsi/ufs/ufshcd.h       |  8 ++++----
> >  4 files changed, 60 insertions(+), 40 deletions(-)
> >
> > diff --git a/drivers/scsi/ufs/ufs-mediatek.c
> > b/drivers/scsi/ufs/ufs-mediatek.c
> > index 80618af..072f4db 100644
> > --- a/drivers/scsi/ufs/ufs-mediatek.c
> > +++ b/drivers/scsi/ufs/ufs-mediatek.c
> > @@ -841,27 +841,27 @@ static int ufs_mtk_link_startup_notify(struct
> > ufs_hba *hba,
> >  	return ret;
> >  }
> >
> > -static int ufs_mtk_device_reset(struct ufs_hba *hba)
> > +static int ufs_mtk_device_reset(struct ufs_hba *hba, bool asserted)
> >  {
> >  	struct arm_smccc_res res;
> >
> > -	ufs_mtk_device_reset_ctrl(0, res);
> > +	if (asserted) {
> > +		ufs_mtk_device_reset_ctrl(0, res);
> >
> > -	/*
> > -	 * The reset signal is active low. UFS devices shall detect
> > -	 * more than or equal to 1us of positive or negative RST_n
> > -	 * pulse width.
> > -	 *
> > -	 * To be on safe side, keep the reset low for at least 10us.
> > -	 */
> > -	usleep_range(10, 15);
> > -
> > -	ufs_mtk_device_reset_ctrl(1, res);
> > -
> > -	/* Some devices may need time to respond to rst_n */
> > -	usleep_range(10000, 15000);
> > +		/*
> > +		 * The reset signal is active low. UFS devices shall detect
> > +		 * more than or equal to 1us of positive or negative RST_n
> > +		 * pulse width.
> > +		 *
> > +		 * To be on safe side, keep the reset low for at least 10us.
> > +		 */
> > +		usleep_range(10, 15);
>
> I see no point in allowing vendors to "tweak" the 1us->10us adjustment.
> The specification says 1us and we all agree that 10us gives us good
> enough slack. I.e. this is common code.

Hi Bjron,

We tried, but Samsung fellows wanted 5us. We couldn't get a agreement
on this delay in short term, so we chose to leave it in vops.


I'm not able to find the code you're referring to.

static void exynos_ufs_dev_hw_reset(struct ufs_hba *hba)
{
        struct exynos_ufs *ufs = ufshcd_get_variant(hba);

        hci_writel(ufs, 0 << 0, HCI_GPIO_OUT);
        udelay(5);
        hci_writel(ufs, 1 << 0, HCI_GPIO_OUT);
}


>
> > +	} else {
> > +		ufs_mtk_device_reset_ctrl(1, res);
> >
> > -	dev_info(hba->dev, "device reset done\n");
> > +		/* Some devices may need time to respond to rst_n */
> > +		usleep_range(10000, 15000);
>
> The comment in both the Qualcomm and Mediatek drivers claim that this is
> sleep relates to the UFS device (not host), so why should it be
> different?
>
> What happens if I take the device that Mediatek see a need for a 10ms
> delay and hook that up to a Qualcomm host? This really should go in the
> common code.
>

Agree, but Qualcomm host didn't have any problems with 10us yet, so if we
put
the 10ms delay to common code, Qualcomm host would suffer longer delay when device reset happens - both bootup and resume(xpm_lvl = 5/6) latency would
be increased.


Okay, for the resume case I accept that this is a measurable difference.
I still believe this is a property of the device and not the platform
though.


True, I also wanted to make the codes simpler and universal for everyone...

Regards,
Bjorn

Regards,
Can Guo.

>
>
> As such I really would prefer to see these delays in the common code!
> You really shouldn't write code based on a speculation that one day
> there might come someone who need other values - when that day come we
> can just change the code, and if it never comes we're better off with
> the cleaner implementation.
>
> Regards,
> Bjorn
>
> > +	}
> >
> >  	return 0;
> >  }
> > diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> > index 2206b1e..fed10e5 100644
> > --- a/drivers/scsi/ufs/ufs-qcom.c
> > +++ b/drivers/scsi/ufs/ufs-qcom.c
> > @@ -1406,10 +1406,11 @@ static void ufs_qcom_dump_dbg_regs(struct
> > ufs_hba *hba)
> >  /**
> >   * ufs_qcom_device_reset() - toggle the (optional) device reset line
> >   * @hba: per-adapter instance
> > + * @asserted: assert or deassert device reset line
> >   *
> >   * Toggles the (optional) reset line to reset the attached device.
> >   */
> > -static int ufs_qcom_device_reset(struct ufs_hba *hba)
> > +static int ufs_qcom_device_reset(struct ufs_hba *hba, bool asserted)
> >  {
> >  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> >
> > @@ -1417,15 +1418,20 @@ static int ufs_qcom_device_reset(struct
> > ufs_hba *hba)
> >  	if (!host->device_reset)
> >  		return -EOPNOTSUPP;
> >
> > -	/*
> > -	 * The UFS device shall detect reset pulses of 1us, sleep for 10us
> > to
> > -	 * be on the safe side.
> > -	 */
> > -	gpiod_set_value_cansleep(host->device_reset, 1);
> > -	usleep_range(10, 15);
> > +	if (asserted) {
> > +		gpiod_set_value_cansleep(host->device_reset, 1);
> >
> > -	gpiod_set_value_cansleep(host->device_reset, 0);
> > -	usleep_range(10, 15);
> > +		/*
> > +		 * The UFS device shall detect reset pulses of 1us, sleep for
> > 10us to
> > +		 * be on the safe side.
> > +		 */
> > +		usleep_range(10, 15);
> > +	} else {
> > +		gpiod_set_value_cansleep(host->device_reset, 0);
> > +
> > +		 /* Some devices may need time to respond to rst_n */
> > +		usleep_range(10, 15);
> > +	}
> >
> >  	return 0;
> >  }
> > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> > index e221add..f2daac2 100644
> > --- a/drivers/scsi/ufs/ufshcd.c
> > +++ b/drivers/scsi/ufs/ufshcd.c
> > @@ -585,7 +585,13 @@ static void ufshcd_device_reset(struct ufs_hba
> > *hba)
> >  {
> >  	int err;
> >
> > -	err = ufshcd_vops_device_reset(hba);
> > +	err = ufshcd_vops_device_reset(hba, true);
> > +	if (err) {
> > +		dev_err(hba->dev, "asserting device reset failed: %d\n", err);
> > +		return;
> > +	}
> > +
> > +	err = ufshcd_vops_device_reset(hba, false);
> >
> >  	if (!err) {
> >  		ufshcd_set_ufs_dev_active(hba);
> > @@ -593,7 +599,11 @@ static void ufshcd_device_reset(struct ufs_hba
> > *hba)
> >  			hba->wb_enabled = false;
> >  			hba->wb_buf_flush_enabled = false;
> >  		}
> > +		dev_dbg(hba->dev, "device reset done\n");
> > +	} else {
> > +		dev_err(hba->dev, "deasserting device reset failed: %d\n", err);
> >  	}
> > +
> >  	if (err != -EOPNOTSUPP)
> >  		ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, err);
> >  }
> > @@ -8686,8 +8696,6 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> > enum ufs_pm_op pm_op)
> >  	if (ret)
> >  		goto set_dev_active;
> >
> > -	ufshcd_vreg_set_lpm(hba);
> > -
> >  disable_clks:
> >  	/*
> >  	 * Call vendor specific suspend callback. As these callbacks may
> > access
> > @@ -8703,6 +8711,9 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> > enum ufs_pm_op pm_op)
> >  	 */
> >  	ufshcd_disable_irq(hba);
> >
> > +	if (ufshcd_is_link_off(hba))
> > +		ufshcd_vops_device_reset(hba, true);
> > +
> >  	ufshcd_setup_clocks(hba, false);
> >
> >  	if (ufshcd_is_clkgating_allowed(hba)) {
> > @@ -8711,6 +8722,8 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> > enum ufs_pm_op pm_op)
> >  					hba->clk_gating.state);
> >  	}
> >
> > +	ufshcd_vreg_set_lpm(hba);
> > +
> >  	/* Put the host controller in low power mode if possible */
> >  	ufshcd_hba_vreg_set_lpm(hba);
> >  	goto out;
> > @@ -8778,18 +8791,19 @@ static int ufshcd_resume(struct ufs_hba
> > *hba, enum ufs_pm_op pm_op)
> >  	old_link_state = hba->uic_link_state;
> >
> >  	ufshcd_hba_vreg_set_hpm(hba);
> > +
> > +	ret = ufshcd_vreg_set_hpm(hba);
> > +	if (ret)
> > +		goto out;
> > +
> >  	/* Make sure clocks are enabled before accessing controller */
> >  	ret = ufshcd_setup_clocks(hba, true);
> >  	if (ret)
> > -		goto out;
> > +		goto disable_vreg;
> >
> >  	/* enable the host irq as host controller would be active soon */
> >  	ufshcd_enable_irq(hba);
> >
> > -	ret = ufshcd_vreg_set_hpm(hba);
> > -	if (ret)
> > -		goto disable_irq_and_vops_clks;
> > -
> >  	/*
> >  	 * Call vendor specific resume callback. As these callbacks may
> > access
> >  	 * vendor specific host controller register space call them when the
> > @@ -8797,7 +8811,7 @@ static int ufshcd_resume(struct ufs_hba *hba,
> > enum ufs_pm_op pm_op)
> >  	 */
> >  	ret = ufshcd_vops_resume(hba, pm_op);
> >  	if (ret)
> > -		goto disable_vreg;
> > +		goto disable_irq_and_vops_clks;
> >
> >  	/* For DeepSleep, the only supported option is to have the link
> > off */
> >  	WARN_ON(ufshcd_is_ufs_dev_deepsleep(hba) &&
> > !ufshcd_is_link_off(hba));
> > @@ -8864,8 +8878,6 @@ static int ufshcd_resume(struct ufs_hba *hba,
> > enum ufs_pm_op pm_op)
> >  	ufshcd_link_state_transition(hba, old_link_state, 0);
> >  vendor_suspend:
> >  	ufshcd_vops_suspend(hba, pm_op);
> > -disable_vreg:
> > -	ufshcd_vreg_set_lpm(hba);
> >  disable_irq_and_vops_clks:
> >  	ufshcd_disable_irq(hba);
> >  	if (hba->clk_scaling.is_allowed)
> > @@ -8876,6 +8888,8 @@ static int ufshcd_resume(struct ufs_hba *hba,
> > enum ufs_pm_op pm_op)
> >  		trace_ufshcd_clk_gating(dev_name(hba->dev),
> >  					hba->clk_gating.state);
> >  	}
> > +disable_vreg:
> > +	ufshcd_vreg_set_lpm(hba);
> >  out:
> >  	hba->pm_op_in_progress = 0;
> >  	if (ret)
> > diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> > index 9bb5f0e..d5fbaba 100644
> > --- a/drivers/scsi/ufs/ufshcd.h
> > +++ b/drivers/scsi/ufs/ufshcd.h
> > @@ -319,7 +319,7 @@ struct ufs_pwr_mode_info {
> >   * @resume: called during host controller PM callback
> >   * @dbg_register_dump: used to dump controller debug information
> >   * @phy_initialization: used to initialize phys
> > - * @device_reset: called to issue a reset pulse on the UFS device
> > + * @device_reset: called to assert or deassert device reset line
> >   * @program_key: program or evict an inline encryption key
> >   * @event_notify: called to notify important events
> >   */
> > @@ -350,7 +350,7 @@ struct ufs_hba_variant_ops {
> >  	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
> >  	void	(*dbg_register_dump)(struct ufs_hba *hba);
> >  	int	(*phy_initialization)(struct ufs_hba *);
> > -	int	(*device_reset)(struct ufs_hba *hba);
> > +	int	(*device_reset)(struct ufs_hba *hba, bool asserted);
> >  	void	(*config_scaling_param)(struct ufs_hba *hba,
> >  					struct devfreq_dev_profile *profile,
> >  					void *data);
> > @@ -1216,10 +1216,10 @@ static inline void
> > ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
> >  		hba->vops->dbg_register_dump(hba);
> >  }
> >
> > -static inline int ufshcd_vops_device_reset(struct ufs_hba *hba)
> > +static inline int ufshcd_vops_device_reset(struct ufs_hba *hba,
> > bool asserted)
> >  {
> >  	if (hba->vops && hba->vops->device_reset)
> > -		return hba->vops->device_reset(hba);
> > +		return hba->vops->device_reset(hba, asserted);
> >
> >  	return -EOPNOTSUPP;
> >  }
> > --
> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> > Forum,
> > a Linux Foundation Collaborative Project
> >



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux