[PATCH AUTOSEL 4.19 3/8] scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Adrian Hunter <adrian.hunter@xxxxxxxxx>

[ Upstream commit af423534d2de86cd0db729a5ac41f056ca8717de ]

The expectation for suspend-to-disk is that devices will be powered-off, so
the UFS device should be put in PowerDown mode. If spm_lvl is not 5, then
that will not happen. Change the pm callbacks to force spm_lvl 5 for
suspend-to-disk poweroff.

Link: https://lore.kernel.org/r/20201207083120.26732-3-adrian.hunter@xxxxxxxxx
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/ufs/ufshcd-pci.c | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index ffe6f82182ba8..68f4f67c5ff88 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -96,6 +96,30 @@ static int ufshcd_pci_resume(struct device *dev)
 {
 	return ufshcd_system_resume(dev_get_drvdata(dev));
 }
+
+/**
+ * ufshcd_pci_poweroff - suspend-to-disk poweroff function
+ * @dev: pointer to PCI device handle
+ *
+ * Returns 0 if successful
+ * Returns non-zero otherwise
+ */
+static int ufshcd_pci_poweroff(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int spm_lvl = hba->spm_lvl;
+	int ret;
+
+	/*
+	 * For poweroff we need to set the UFS device to PowerDown mode.
+	 * Force spm_lvl to ensure that.
+	 */
+	hba->spm_lvl = 5;
+	ret = ufshcd_system_suspend(hba);
+	hba->spm_lvl = spm_lvl;
+	return ret;
+}
+
 #endif /* !CONFIG_PM_SLEEP */
 
 #ifdef CONFIG_PM
@@ -190,8 +214,14 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 }
 
 static const struct dev_pm_ops ufshcd_pci_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ufshcd_pci_suspend,
-				ufshcd_pci_resume)
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= ufshcd_pci_suspend,
+	.resume		= ufshcd_pci_resume,
+	.freeze		= ufshcd_pci_suspend,
+	.thaw		= ufshcd_pci_resume,
+	.poweroff	= ufshcd_pci_poweroff,
+	.restore	= ufshcd_pci_resume,
+#endif
 	SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend,
 			   ufshcd_pci_runtime_resume,
 			   ufshcd_pci_runtime_idle)
-- 
2.27.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux