[PATCH 06/11] scsi: isci: port: broadcast change: Pass gfp_t flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.

The libsas ->notify_port_event() hook is called from
isci_port_bc_change_received(). Below is the context analysis for all of
its call chains:

host.c: sci_controller_error_handler(): atomic, irq handler     (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
  -> sci_controller_process_completions()
    -> sci_controller_event_completion()
      -> phy.c: sci_phy_event_handler()
        -> port.c: sci_port_broadcast_change_received()
          -> isci_port_bc_change_received()

host.c: isci_host_init()                                        (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_initialize(), atomic                        (*)
    -> port_config.c: sci_port_configuration_agent_initialize()
      -> sci_mpc_agent_validate_phy_configuration()
        -> port.c: sci_port_add_phy()
          -> sci_port_set_phy()
            -> phy.c: sci_phy_set_port()
              -> port.c: sci_port_broadcast_change_received()
                -> isci_port_bc_change_received()

port_config.c: apc_agent_timeout(), atomic, timer callback      (*)
  -> sci_apc_agent_configure_ports()
    -> port.c: sci_port_add_phy()
      -> sci_port_set_phy()
        -> phy.c: sci_phy_set_port()
          -> port.c: sci_port_broadcast_change_received()
            -> isci_port_bc_change_received()

phy.c: enter SCI state: *SCI_PHY_STOPPED*                       # Cont. from [1]
  -> sci_phy_stopped_state_enter()
    -> host.c: sci_controller_link_down()
      -> ->link_down_handler()
      == port_config.c: sci_apc_agent_link_down()
        -> port.c: sci_port_remove_phy()
          -> sci_port_clear_phy()
            -> phy.c: sci_phy_set_port()
              -> port.c: sci_port_broadcast_change_received()
                -> isci_port_bc_change_received()

phy.c: enter SCI state: *SCI_PHY_STARTING*                      # Cont. from [2]
  -> sci_phy_starting_state_enter()
    -> host.c: sci_controller_link_down()
      -> ->link_down_handler()
      == port_config.c: sci_apc_agent_link_down()
        -> port.c: sci_port_remove_phy()
          -> sci_port_clear_phy()
            -> phy.c: sci_phy_set_port()
              -> port.c: sci_port_broadcast_change_received()
                -> isci_port_bc_change_received()

[1] Call chains for entering state: *SCI_PHY_STOPPED*
-----------------------------------------------------

host.c: isci_host_init()                                        (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_initialize(), atomic                        (*)
      -> phy.c: sci_phy_initialize()
        -> phy.c: sci_phy_link_layer_initialization()
          -> phy.c: sci_change_state(SCI_PHY_STOPPED)

init.c: PCI ->remove() || PM_OPS ->suspend,  process context    (+)
  -> host.c: isci_host_deinit()
    -> sci_controller_stop_phys()
      -> phy.c: sci_phy_stop()
	-> sci_change_state(SCI_PHY_STOPPED)

phy.c: isci_phy_control()
spin_lock_irqsave(isci_host::scic_lock, )
  -> sci_phy_stop(), atomic                                     (*)
    -> sci_change_state(SCI_PHY_STOPPED)

[2] Call chains for entering state: *SCI_PHY_STARTING*
------------------------------------------------------

phy.c: phy_sata_timeout(), atimer, timer callback               (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> sci_change_state(SCI_PHY_STARTING)

host.c: phy_startup_timeout(), atomic, timer callback           (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> sci_controller_start_next_phy()
    -> sci_phy_start()
      -> sci_change_state(SCI_PHY_STARTING)

host.c: isci_host_start()                                       (@)
spin_lock_irq(isci_host::scic_lock)
  -> sci_controller_start(), atomic                             (*)
    -> sci_controller_start_next_phy()
      -> sci_phy_start()
        -> sci_change_state(SCI_PHY_STARTING)

phy.c: Enter SCI state *SCI_PHY_SUB_FINAL*                      # Cont. from [2A]
  -> sci_change_state(SCI_PHY_SUB_FINAL)
    -> sci_phy_starting_final_substate_enter()
      -> sci_change_state(SCI_PHY_READY)
        -> Enter SCI state: *SCI_PHY_READY*
          -> sci_phy_ready_state_enter()
            -> host.c: sci_controller_link_up()
              -> sci_controller_start_next_phy()
                -> sci_phy_start()
                  -> sci_change_state(SCI_PHY_STARTING)

phy.c: sci_phy_event_handler(), atomic, discussed earlier       (*)
  -> sci_change_state(SCI_PHY_STARTING), 11 instances

port.c: isci_port_perform_hard_reset()
spin_lock_irqsave(isci_host::scic_lock, )
  -> port.c: sci_port_hard_reset(), atomic                      (*)
    -> phy.c: sci_phy_reset()
      -> sci_change_state(SCI_PHY_RESETTING)
        -> enter SCI PHY state: *SCI_PHY_RESETTING*
          -> sci_phy_resetting_state_enter()
            -> sci_change_state(SCI_PHY_STARTING)

[2A] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL*
------------------------------------------------------------

host.c: power_control_timeout(), atomic, timer callback         (*)
spin_lock_irqsave(isci_host::scic_lock, )
  -> phy.c: sci_phy_consume_power_handler()
    -> phy.c: sci_change_state(SCI_PHY_SUB_FINAL)

host.c: sci_controller_error_handler(): atomic, irq handler     (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
  -> sci_controller_process_completions()
    -> sci_controller_unsolicited_frame()
      -> phy.c: sci_phy_frame_handler()
        -> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER)
          -> sci_phy_starting_await_sas_power_substate_enter()
            -> host.c: sci_controller_power_control_queue_insert()
              -> phy.c: sci_phy_consume_power_handler()
                -> sci_change_state(SCI_PHY_SUB_FINAL)
        -> sci_change_state(SCI_PHY_SUB_FINAL)
    -> sci_controller_event_completion()
      -> phy.c: sci_phy_event_handler()
        -> sci_phy_start_sata_link_training()
          -> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER)
            -> sci_phy_starting_await_sata_power_substate_enter
              -> host.c: sci_controller_power_control_queue_insert()
                -> phy.c: sci_phy_consume_power_handler()
                  -> sci_change_state(SCI_PHY_SUB_FINAL)

As can be seen from the "(*)" markers above, almost all the call-chains
are atomic. The only exception, marked with "(+)", is a PCI ->remove()
and PM_OPS ->suspend() cold path. Thus, pass GFP_ATOMIC to the libsas
port event notifier.

Note, the now-replaced libsas APIs used in_interrupt() to implicitly
decide which memory allocation type to use.  This was only partially
correct, as it fails to choose the correct GFP flags when just
preemption or interrupts are disabled. Such buggy code paths are marked
with "(@)" in the call chains above.

Signed-off-by: Ahmed S. Darwish <a.darwish@xxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Cc: Artur Paszkiewicz <artur.paszkiewicz@xxxxxxxxx>
---
 drivers/scsi/isci/port.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 69684c80c407..6244981a3ebf 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -164,7 +164,9 @@ static void isci_port_bc_change_received(struct isci_host *ihost,
 		"%s: isci_phy = %p, sas_phy = %p\n",
 		__func__, iphy, &iphy->sas_phy);
 
-	ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD);
+	ihost->sas_ha.notify_port_event_gfp(&iphy->sas_phy,
+					    PORTE_BROADCAST_RCVD,
+					    GFP_ATOMIC);
 	sci_port_bcn_enable(iport);
 }
 
-- 
2.29.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux