This patchset tries to add support for TP4065a ("Simple Copy Command"),
v2020.05.04 ("Ratified")
The Specification can be found in following link.
https://nvmexpress.org/wp-content/uploads/NVM-Express-1.4-Ratified-TPs-1.zip
This is an RFC. Looking forward for any feedbacks or other alternate
designs for plumbing simple copy to IO stack.
Simple copy command is a copy offloading operation and is used to copy
multiple contiguous ranges (source_ranges) of LBA's to a single destination
LBA within the device reducing traffic between host and device.
This implementation accepts destination, no of sources and arrays of
source ranges from application. For devices suporting native copy
offloading, attach the control informantion as payload to the bio and
submits to the device. For devices without native copy support, copy
emulation is done by reading source range into memory and writing it to
the destination.
Following limits are added to queue limits and are exposed in sysfs
to userspace
- *copy_offload* controls copy_offload. set 0 to disable copy
offload, 1 to enable native copy offloading support.
- *max_copy_sectors* limits the sum of all source_range length
- *max_copy_nr_ranges* limits the number of source ranges
- *max_copy_range_sectors* limit the maximum number of sectors
that can constitute a single source range.
max_copy_sectors = 0 indicates the device doesn't support copy
offloading.
*copy offload* sysfs entry is configurable and can be used toggle
between emulation and native support depending upon the usecase.
Changes from v2
1. Add emulation support for devices not supporting copy.
2. Add *copy_offload* sysfs entry to enable and disable copy_offload
in devices supporting simple copy.
3. Remove simple copy support for stacked devices.
Changes from v1:
1. Fix memory leak in __blkdev_issue_copy
2. Unmark blk_check_copy inline
3. Fix line break in blk_check_copy_eod
4. Remove p checks and made code more readable
5. Don't use bio_set_op_attrs and remove op and set
bi_opf directly
6. Use struct_size to calculate total_size
7. Fix partition remap of copy destination
8. Remove mcl,mssrl,msrc from nvme_ns
9. Initialize copy queue limits to 0 in nvme_config_copy
10. Remove return in QUEUE_FLAG_COPY check
11. Remove unused OCFS
SelvaKumar S (2):
block: add simple copy support
nvme: add simple copy support
block/blk-core.c | 94 ++++++++++++++++++--
block/blk-lib.c | 182 ++++++++++++++++++++++++++++++++++++++
block/blk-merge.c | 2 +
block/blk-settings.c | 10 +++
block/blk-sysfs.c | 50 +++++++++++
block/blk-zoned.c | 1 +
block/bounce.c | 1 +
block/ioctl.c | 43 +++++++++
drivers/nvme/host/core.c | 89 +++++++++++++++++++
include/linux/bio.h | 1 +
include/linux/blk_types.h | 15 ++++
include/linux/blkdev.h | 16 ++++
include/linux/nvme.h | 43 ++++++++-
include/uapi/linux/fs.h | 13 +++
14 files changed, 549 insertions(+), 11 deletions(-)
--
2.25.1
