Re: [PATCH v1 1/1] scsi: ufs: Fix ufs power down/on specs violation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-12-09 15:09, Ziqi Chen wrote:
As per specs, e.g, JESD220E chapter 7.2, while powering
off/on the ufs device, RST_N signal and REF_CLK signal
should be between VSS(Ground) and VCCQ/VCCQ2.

Power down:
1. Assert RST_N low
2. Turn-off REF_CLK
3. Turn-off VCC
4. Turn-off VCCQ/VCCQ2.
power on:
1. Turn-on VCC
2. Turn-on VCCQ/VCCQ2
3. Turn-On REF_CLK
4. Deassert RST_N high.

Signed-off-by: Ziqi Chen <ziqichen@xxxxxxxxxxxxxx>
---
 drivers/scsi/ufs/ufs-qcom.c | 14 ++++++++++----
 drivers/scsi/ufs/ufshcd.c   | 19 +++++++++----------
 drivers/scsi/ufs/ufshcd.h   |  4 ++--
 3 files changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 1e434cc..5ed3a63d 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -582,6 +582,9 @@ static int ufs_qcom_suspend(struct ufs_hba *hba,
enum ufs_pm_op pm_op)
 		ufs_qcom_disable_lane_clks(host);
 		phy_power_off(phy);

+		if (hba->vops && hba->vops->device_reset)
+			hba->vops->device_reset(hba, false);
+

Can you make a new wrapper func to do this? ufs-qcom.c is the vendor
driver, why call hba->vops->func() in vendor driver?

 	} else if (!ufs_qcom_is_link_active(hba)) {
 		ufs_qcom_disable_lane_clks(host);
 	}
@@ -1400,10 +1403,11 @@ static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
 /**
  * ufs_qcom_device_reset() - toggle the (optional) device reset line
  * @hba: per-adapter instance
+ * @toggle: need pulling up or not
  *
  * Toggles the (optional) reset line to reset the attached device.
  */
-static int ufs_qcom_device_reset(struct ufs_hba *hba)
+static int ufs_qcom_device_reset(struct ufs_hba *hba, bool toggle)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);

@@ -1416,10 +1420,12 @@ static int ufs_qcom_device_reset(struct ufs_hba *hba)
 	 * be on the safe side.
 	 */
 	gpiod_set_value_cansleep(host->device_reset, 1);
-	usleep_range(10, 15);

-	gpiod_set_value_cansleep(host->device_reset, 0);
-	usleep_range(10, 15);
+	if (toggle) {
+		usleep_range(10, 15);
+		gpiod_set_value_cansleep(host->device_reset, 0);
+		usleep_range(10, 15);
+	}

 	return 0;
 }
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 92d433d..5ab1c02 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8633,8 +8633,6 @@ static int ufshcd_suspend(struct ufs_hba *hba,
enum ufs_pm_op pm_op)
 	if (ret)
 		goto set_dev_active;

-	ufshcd_vreg_set_lpm(hba);
-
 disable_clks:
 	/*
* Call vendor specific suspend callback. As these callbacks may access
@@ -8664,6 +8662,7 @@ static int ufshcd_suspend(struct ufs_hba *hba,
enum ufs_pm_op pm_op)

 	/* Put the host controller in low power mode if possible */
 	ufshcd_hba_vreg_set_lpm(hba);
+	ufshcd_vreg_set_lpm(hba);
 	goto out;

 set_link_active:
@@ -8729,18 +8728,18 @@ static int ufshcd_resume(struct ufs_hba *hba,
enum ufs_pm_op pm_op)
 	old_link_state = hba->uic_link_state;

 	ufshcd_hba_vreg_set_hpm(hba);
+	ret = ufshcd_vreg_set_hpm(hba);
+	if (ret)
+		goto out;
+
 	/* Make sure clocks are enabled before accessing controller */
 	ret = ufshcd_setup_clocks(hba, true);
 	if (ret)
-		goto out;
+		goto disable_vreg;

 	/* enable the host irq as host controller would be active soon */
 	ufshcd_enable_irq(hba);

-	ret = ufshcd_vreg_set_hpm(hba);
-	if (ret)
-		goto disable_irq_and_vops_clks;
-
 	/*
* Call vendor specific resume callback. As these callbacks may access
 	 * vendor specific host controller register space call them when the
@@ -8748,7 +8747,7 @@ static int ufshcd_resume(struct ufs_hba *hba,
enum ufs_pm_op pm_op)
 	 */
 	ret = ufshcd_vops_resume(hba, pm_op);
 	if (ret)
-		goto disable_vreg;
+		goto disable_irq_and_vops_clks;

/* For DeepSleep, the only supported option is to have the link off */ WARN_ON(ufshcd_is_ufs_dev_deepsleep(hba) && !ufshcd_is_link_off(hba));
@@ -8815,8 +8814,6 @@ static int ufshcd_resume(struct ufs_hba *hba,
enum ufs_pm_op pm_op)
 	ufshcd_link_state_transition(hba, old_link_state, 0);
 vendor_suspend:
 	ufshcd_vops_suspend(hba, pm_op);
-disable_vreg:
-	ufshcd_vreg_set_lpm(hba);
 disable_irq_and_vops_clks:
 	ufshcd_disable_irq(hba);
 	if (hba->clk_scaling.is_allowed)
@@ -8827,6 +8824,8 @@ static int ufshcd_resume(struct ufs_hba *hba,
enum ufs_pm_op pm_op)
 		trace_ufshcd_clk_gating(dev_name(hba->dev),
 					hba->clk_gating.state);
 	}
+disable_vreg:
+	ufshcd_vreg_set_lpm(hba);
 out:
 	hba->pm_op_in_progress = 0;
 	if (ret)
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 61344c4..47c7dab6 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -323,7 +323,7 @@ struct ufs_hba_variant_ops {
 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
 	void	(*dbg_register_dump)(struct ufs_hba *hba);
 	int	(*phy_initialization)(struct ufs_hba *);
-	int	(*device_reset)(struct ufs_hba *hba);
+	int	(*device_reset)(struct ufs_hba *hba, bool);
 	void	(*config_scaling_param)(struct ufs_hba *hba,
 					struct devfreq_dev_profile *profile,
 					void *data);
@@ -1211,7 +1211,7 @@ static inline void
ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
 static inline void ufshcd_vops_device_reset(struct ufs_hba *hba)
 {
 	if (hba->vops && hba->vops->device_reset) {
-		int err = hba->vops->device_reset(hba);
+		int err = hba->vops->device_reset(hba, true);

 		if (!err)
 			ufshcd_set_ufs_dev_active(hba);



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux