[PATCH] scsi: sd: suppress suprious block errors when WRITE SAME is being disabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The block layer code will split a large zeroout request into multiple bios
and if WRITE SAME is disabled because the storage device reports that it
does not support it (or support the length used), we can get an error message
from the block layer despite the setting of RQF_QUIET on the first request.
This is because more than one request may have already been submitted.

Fix this by setting RQF_QUIET when BLK_STS_TARGET is returned to fail the
request early, we don't need to log a message because we did not actually
submit the command to the device, and the block layer code will handle the
error by submitting individual write bios.

Signed-off-by: Ewan D. Milne <emilne@xxxxxxxxxx>
---
 drivers/scsi/sd.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b1267f1f3a89..1032905bbe76 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -874,8 +874,10 @@ static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
 		}
 	}
 
-	if (sdp->no_write_same)
+	if (sdp->no_write_same) {
+		rq->rq_flags |= RQF_QUIET;
 		return BLK_STS_TARGET;
+	}
 
 	if (sdkp->ws16 || lba > 0xffffffff || nr_blocks > 0xffff)
 		return sd_setup_write_same16_cmnd(cmd, false);
-- 
2.18.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux