On Mon, 2020-12-07 at 13:50 +0800, Stanley Chu wrote: > WriteBootser flush during suspend is not necessary to be enabled if > WriteBooster feature is disabled. Simply adding a check to prevent > unexpected power drain. > > Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx> > --- > drivers/scsi/ufs/ufshcd.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index 4879e87577e1..89fa8b9ac11d 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -5458,7 +5458,7 @@ static bool ufshcd_wb_need_flush(struct ufs_hba > *hba) > u32 avail_buf; > u8 index; > > - if (!ufshcd_is_wb_allowed(hba)) > + if (!ufshcd_is_wb_allowed(hba) || !hba->wb_enabled) > return false; > /* > * The ufs device needs the vcc to be ON to flush. Hi Stanley In the 3.1 Spec: "If the fWriteBoosterEn flag is set to zero, data written to any logical unit is written in normal storage. If the fWriteBoosterEn flag is set to one and the device is configured in “shared buffer” mode, data written to any logical unit is written in the shared WriteBooster Buffer." so, IMO, fWriteBoosterEn is independant with WB buffer flush. as for the flush: "There are two methods for flushing data from the WriteBooster Buffer to the normal storage: one is using an explicit flush command, the other enabling the flushing during link hibernate state. If the fWriteBoosterBufferFlushEn flag is set to one, the device shall flush the data stored in the WriteBooster Buffer to the normal storage. If fWriteBoosterBufferFlushDuringHibernate is set to one, the device flushes the WriteBooster Buffer data automatically whenever the link enters the hibernate (HIBERN8) state." IMO, for the flush, it is controlled by fWriteBoosterBufferFlushEn and fWriteBoosterBufferFlushDuringHibernate. how do you understand the above two paragraphs from Spec? thanks, Bean
