The expectation for suspend-to-disk is that devices will be powered-off,
so the UFS device should be put in PowerDown mode. If spm_lvl is not 5,
then that will not happen. Change the pm callbacks to force spm_lvl 5 for
suspend-to-disk poweroff.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/scsi/ufs/ufshcd-pci.c | 34 ++++++++++++++++++++++++++++++++--
1 file changed, 32 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index 360c25f1f061..5d33c39fa82f 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -227,6 +227,30 @@ static int ufshcd_pci_resume(struct device *dev)
{
return ufshcd_system_resume(dev_get_drvdata(dev));
}
+
+/**
+ * ufshcd_pci_poweroff - suspend-to-disk poweroff function
+ * @dev: pointer to PCI device handle
+ *
+ * Returns 0 if successful
+ * Returns non-zero otherwise
+ */
+static int ufshcd_pci_poweroff(struct device *dev)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ int spm_lvl = hba->spm_lvl;
+ int ret;
+
+ /*
+ * For poweroff we need to set the UFS device to PowerDown mode.
+ * Force spm_lvl to ensure that.
+ */
+ hba->spm_lvl = 5;
+ ret = ufshcd_system_suspend(hba);
+ hba->spm_lvl = spm_lvl;
+ return ret;
+}
+
#endif /* !CONFIG_PM_SLEEP */
#ifdef CONFIG_PM
@@ -322,8 +346,14 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
static const struct dev_pm_ops ufshcd_pci_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(ufshcd_pci_suspend,
- ufshcd_pci_resume)
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ufshcd_pci_suspend,
+ .resume = ufshcd_pci_resume,
+ .freeze = ufshcd_pci_suspend,
+ .thaw = ufshcd_pci_resume,
+ .poweroff = ufshcd_pci_poweroff,
+ .restore = ufshcd_pci_resume,
+#endif
SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend,
ufshcd_pci_runtime_resume,
ufshcd_pci_runtime_idle)
--
2.17.1
