[PATCH] scsi: pm80xx: Fix error return in pm8001_pci_probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Forget to set error code when pm8001_configure_phy_settings
failed. We fixed it by using rc to store return value of
pm8001_configure_phy_settings.

Fixes: 279094079a442 ("[SCSI] pm80xx: Phy settings support for motherboard controller.")
Signed-off-by: Zhang Qilong <zhangqilong3@xxxxxxxxxx>
---
 drivers/scsi/pm8001/pm8001_init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 9a5d284f076a..ee2de177d0d0 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -1127,7 +1127,8 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 
 	pm8001_init_sas_add(pm8001_ha);
 	/* phy setting support for motherboard controller */
-	if (pm8001_configure_phy_settings(pm8001_ha))
+	rc = pm8001_configure_phy_settings(pm8001_ha);
+	if (rc)
 		goto err_out_shost;
 
 	pm8001_post_sas_ha_init(shost, chip);
-- 
2.25.4




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux