Re: [PATCH v1 3/3] scsi_debug: iouring iopoll support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-11-30 4:06 a.m., Kashyap Desai wrote:

On 2020-10-15 9:37 a.m., Kashyap Desai wrote:
Add support of iouring iopoll interface in scsi_debug.
This feature requires shared hosttag support in kernel and driver.

I am continuing to test this patch. There is one fix shown inline below
plus a
question near the end.

Hi Doug,  I have created add-on patch which includes all your comment. I am
also able to see the issue you reported and below patch fix it.
I will hold V2 revision of the series and I will wait for your Review-by and
Tested-by Tag.

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 4d9cc6af588c..fb328253086d 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -5675,6 +5675,7 @@ MODULE_PARM_DESC(opt_xferlen_exp, "optimal transfer
length granularity exponent
  MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout,
8->recovered_err... (def=0)");
  MODULE_PARM_DESC(per_host_store, "If set, next positive add_host will get
new store (def=0)");
  MODULE_PARM_DESC(physblk_exp, "physical block exponent (def=0)");
+MODULE_PARM_DESC(poll_queues, "support for iouring iopoll queues (1 to
max(submit_queues - 1)");
  MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
  MODULE_PARM_DESC(random, "If set, uniformly randomize command duration
between 0 and delay_in_ns");
  MODULE_PARM_DESC(removable, "claim to have removable media (def=0)");
@@ -5683,7 +5684,6 @@ MODULE_PARM_DESC(sector_size, "logical block size in
bytes (def=512)");
  MODULE_PARM_DESC(statistics, "collect statistics on commands, queues
(def=0)");
  MODULE_PARM_DESC(strict, "stricter checks: reserved field in cdb (def=0)");
  MODULE_PARM_DESC(submit_queues, "support for block multi-queue (def=1)");
-MODULE_PARM_DESC(poll_queues, "support for iouring iopoll queues");
  MODULE_PARM_DESC(tur_ms_to_ready, "TEST UNIT READY millisecs before initial
good status (def=0)");
  MODULE_PARM_DESC(unmap_alignment, "lowest aligned thin provisioning lba
(def=0)");
  MODULE_PARM_DESC(unmap_granularity, "thin provisioning granularity in
blocks (def=1)");
@@ -7199,7 +7199,7 @@ static int sdebug_blk_mq_poll(struct Scsi_Host *shost,
unsigned int queue_num)
         do {
                 spin_lock_irqsave(&sqp->qc_lock, iflags);
                 qc_idx = find_first_bit(sqp->in_use_bm, sdebug_max_queue);
-               if (unlikely((qc_idx < 0) || (qc_idx >= SDEBUG_CANQUEUE)))
+               if (unlikely((qc_idx < 0) || (qc_idx >= sdebug_max_queue)))
                         goto out;

                 sqcp = &sqp->qc_arr[qc_idx];
@@ -7477,10 +7477,17 @@ static int sdebug_driver_probe(struct device *dev)
                 hpnt->host_tagset = 1;

         /* poll queues are possible for nr_hw_queues > 1 */
-       if (hpnt->nr_hw_queues == 1)
+       if (hpnt->nr_hw_queues == 1 || (poll_queues < 1)) {
+               pr_warn("%s: trim poll_queues to 0. poll_q/nr_hw = (%d/%d)
\n",
+                        my_name, poll_queues, hpnt->nr_hw_queues);
                 poll_queues = 0;
+       }

-       /* poll queues  */
+       /*
+        * Poll queues don't need interrupts, but we need at least one I/O
queue
+        * left over for non-polled I/O.
+        * If condition not met, trim poll_queues to 1 (just for
simplicity).
+        */
         if (poll_queues >= submit_queues) {
                 pr_warn("%s: trim poll_queues to 1\n", my_name);
                 poll_queues = 1;



Kashyap,
I struggled with this patch, first the line wrap, then the last two
patch segments not applying. Could you send me the scsi_debug.c file
attached to an email?

+	do {
+		spin_lock_irqsave(&sqp->qc_lock, iflags);
+		qc_idx = find_first_bit(sqp->in_use_bm, sdebug_max_queue);
+		if (unlikely((qc_idx < 0) || (qc_idx >= SDEBUG_CANQUEUE)))

The above line IMO needs to be:
		if (unlikely((qc_idx < 0) || (qc_idx >= sdebug_max_queue)))

If not, when sdebug_max_queue < SDEBUG_CANQUEUE and there is no
request waiting then "scp is NULL, ..." is reported suggesting there is an
error.

BTW -  Is below piece of code at sdebug_q_cmd_complete() requires similar
change ?
Use sdebug_max_queue instead of SDEBUG_CANQUEUE
         if (unlikely((qc_idx < 0) || (qc_idx >= SDEBUG_CANQUEUE))) {
                 pr_err("wild qc_idx=%d\n", qc_idx);
                 return;
         }

Yes, I need to look at this. sdebug_max_queue is initialized to
SDEBUG_CANQUEUE but then can be overridden by the invocation line parameters.
Several arrays in structures are sized by SDEBUG_CANQUEUE which will
remain. But most SDEBUG_CANQUEUE uses inside driver functions can probably
be replaced by sdebug_max_queue when I confirm that it is safe. Since
sdebug_max_queue <= SDEBUG_CANQUEUE and the fields in between should
always be zero, the current situation just leads to wasted cycles.

Doug Gilbert




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux