> On Nov 26, 2020, at 7:29 AM, Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx> wrote:
>
> From: "Ahmed S. Darwish" <a.darwish@xxxxxxxxxxxxx>
>
> qla83xx_wait_logic() is used to control the frequency of device IDC lock
> retries. If in_interrupt() is true, it does 20 loops of cpu_relax().
> Otherwise, it sleeps for 100ms and yields the CPU.
>
> While in_interrupt() is ill-defined and does not provide what the name
> suggests, it is not needed here: that qla83xx_wait_logic() is exclusively
> called by qla83xx_idc_lock() / unlock(), and they always run from
> process context. Below is an analysis of all the idc lock/unlock callers,
> in order of appearance:
>
> - qla_os.c:
> qla83xx_nic_core_unrecoverable_work(),
> qla83xx_idc_state_handler_work(),
> qla83xx_nic_core_reset_work(),
> qla83xx_service_idc_aen(), all workqueue context
>
> - qla_os.c: qla83xx_check_nic_core_fw_alive(), has msleep()
>
> - qla_os.c: qla83xx_set_drv_presence(), called once from
> qla2x00_abort_isp(), which is bound to process-context ->abort_isp()
> hook. It also invokes wait_for_completion_timeout() through the
> chain qla2x00_configure_hba() => qla24xx_link_initialize() =>
> qla2x00_mailbox_command().
>
> - qla_os.c: qla83xx_clear_drv_presence(), which is called from
> qla2x00_abort_isp() discussed above, and from qla2x00_remove_one()
> which is PCI process-context ->remove() hook.
>
> - qla_os.c: qla83xx_need_reset_handler(), has a one second msleep() in
> a loop.
>
> - qla_os.c: qla83xx_device_bootstrap(), called only by
> qla83xx_idc_state_handler(), which has multiple msleep()
> invocations.
>
> - qla_os.c: qla83xx_idc_state_handler(), multiple msleep()
> invocations.
>
> - qla_attr.c: qla2x00_sysfs_write_reset(), sysfs bin_attribute
> ->write() hook, process context
>
> - qla_init.c: qla83xx_nic_core_fw_load()
> => qla_init.c: qla2x00_initialize_adapter()
> => bound to isp_operations ->initialize_adapter() hook
> ** => qla_os.c: qla2x00_probe_one(), PCI ->probe() process ctx
>
> - qla_init.c: qla83xx_initiating_reset(), msleep() in a loop.
>
> - qla_init.c: qla83xx_nic_core_reset(), called by
> qla83xx_nic_core_reset_work(), workqueue context.
>
> Remove the in_interrupt() check, and thus replace the entirety of
> qla83xx_wait_logic() with an msleep(QLA83XX_WAIT_LOGIC_MS).
>
> Mark qla83xx_idc_lock() / unlock() with "Context: task, can sleep".
>
> Signed-off-by: Ahmed S. Darwish <a.darwish@xxxxxxxxxxxxx>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
> Cc: Nilesh Javali <njavali@xxxxxxxxxxx>
> Cc: GR-QLogic-Storage-Upstream@xxxxxxxxxxx
> ---
> drivers/scsi/qla2xxx/qla_os.c | 43 ++++++++++++++++-------------------
> 1 file changed, 19 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
> index f9c8ae9d669ef..2a8e065b192c3 100644
> --- a/drivers/scsi/qla2xxx/qla_os.c
> +++ b/drivers/scsi/qla2xxx/qla_os.c
> @@ -5619,25 +5619,10 @@ qla83xx_service_idc_aen(struct work_struct *work)
> }
> }
>
> -static void
> -qla83xx_wait_logic(void)
> -{
> - int i;
> -
> - /* Yield CPU */
> - if (!in_interrupt()) {
> - /*
> - * Wait about 200ms before retrying again.
> - * This controls the number of retries for single
> - * lock operation.
> - */
> - msleep(100);
> - schedule();
> - } else {
> - for (i = 0; i < 20; i++)
> - cpu_relax(); /* This a nop instr on i386 */
> - }
> -}
> +/*
> + * Control the frequency of IDC lock retries
> + */
> +#define QLA83XX_WAIT_LOGIC_MS 100
>
> static int
> qla83xx_force_lock_recovery(scsi_qla_host_t *base_vha)
> @@ -5727,7 +5712,7 @@ qla83xx_idc_lock_recovery(scsi_qla_host_t *base_vha)
> goto exit;
>
> if (o_drv_lockid == n_drv_lockid) {
> - qla83xx_wait_logic();
> + msleep(QLA83XX_WAIT_LOGIC_MS);
> goto retry_lockid;
> } else
> return QLA_SUCCESS;
> @@ -5736,6 +5721,9 @@ qla83xx_idc_lock_recovery(scsi_qla_host_t *base_vha)
> return rval;
> }
>
> +/*
> + * Context: task, can sleep
> + */
> void
> qla83xx_idc_lock(scsi_qla_host_t *base_vha, uint16_t requester_id)
> {
> @@ -5743,6 +5731,8 @@ qla83xx_idc_lock(scsi_qla_host_t *base_vha, uint16_t requester_id)
> uint32_t lock_owner;
> struct qla_hw_data *ha = base_vha->hw;
>
> + might_sleep();
> +
> /* IDC-lock implementation using driver-lock/lock-id remote registers */
> retry_lock:
> if (qla83xx_rd_reg(base_vha, QLA83XX_DRIVER_LOCK, &data)
> @@ -5761,7 +5751,7 @@ qla83xx_idc_lock(scsi_qla_host_t *base_vha, uint16_t requester_id)
> /* Retry/Perform IDC-Lock recovery */
> if (qla83xx_idc_lock_recovery(base_vha)
> == QLA_SUCCESS) {
> - qla83xx_wait_logic();
> + msleep(QLA83XX_WAIT_LOGIC_MS);
> goto retry_lock;
> } else
> ql_log(ql_log_warn, base_vha, 0xb075,
> @@ -6259,6 +6249,9 @@ void qla24xx_process_purex_list(struct purex_list *list)
> }
> }
>
> +/*
> + * Context: task, can sleep
> + */
> void
> qla83xx_idc_unlock(scsi_qla_host_t *base_vha, uint16_t requester_id)
> {
> @@ -6269,6 +6262,8 @@ qla83xx_idc_unlock(scsi_qla_host_t *base_vha, uint16_t requester_id)
> uint32_t data;
> struct qla_hw_data *ha = base_vha->hw;
>
> + might_sleep();
> +
> /* IDC-unlock implementation using driver-unlock/lock-id
> * remote registers
> */
> @@ -6284,7 +6279,7 @@ qla83xx_idc_unlock(scsi_qla_host_t *base_vha, uint16_t requester_id)
> /* SV: XXX: IDC unlock retrying needed here? */
>
> /* Retry for IDC-unlock */
> - qla83xx_wait_logic();
> + msleep(QLA83XX_WAIT_LOGIC_MS);
> retry++;
> ql_dbg(ql_dbg_p3p, base_vha, 0xb064,
> "Failed to release IDC lock, retrying=%d\n", retry);
> @@ -6292,7 +6287,7 @@ qla83xx_idc_unlock(scsi_qla_host_t *base_vha, uint16_t requester_id)
> }
> } else if (retry < 10) {
> /* Retry for IDC-unlock */
> - qla83xx_wait_logic();
> + msleep(QLA83XX_WAIT_LOGIC_MS);
> retry++;
> ql_dbg(ql_dbg_p3p, base_vha, 0xb065,
> "Failed to read drv-lockid, retrying=%d\n", retry);
> @@ -6308,7 +6303,7 @@ qla83xx_idc_unlock(scsi_qla_host_t *base_vha, uint16_t requester_id)
> if (qla83xx_access_control(base_vha, options, 0, 0, NULL)) {
> if (retry < 10) {
> /* Retry for IDC-unlock */
> - qla83xx_wait_logic();
> + msleep(QLA83XX_WAIT_LOGIC_MS);
> retry++;
> ql_dbg(ql_dbg_p3p, base_vha, 0xb066,
> "Failed to release IDC lock, retrying=%d\n", retry);
>
> 2.29.2
>
Looks Good.
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
--
Himanshu Madhani Oracle Linux Engineering
