On Tue, Nov 24, 2020 at 10:38 AM Colin King <colin.king@xxxxxxxxxxxxx> wrote: > > From: Colin Ian King <colin.king@xxxxxxxxxxxxx> > > There are two words that need separating with a space in a > pm8001_dbg message. Fix it. > > Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx> Acked-by: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx> Thanks > --- > drivers/scsi/pm8001/pm8001_hwi.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c > index 08d6cc9b50db..c8d4d87c5473 100644 > --- a/drivers/scsi/pm8001/pm8001_hwi.c > +++ b/drivers/scsi/pm8001/pm8001_hwi.c > @@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) > regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK); > pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3); > pm8001_dbg(pm8001_ha, INIT, > - "GSM 0x700048 - Write Data Parity Check Enableis set to = 0x%x\n", > + "GSM 0x700048 - Write Data Parity Check Enable is set to = 0x%x\n", > pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)); > > /* step 13: bring the IOP and AAP1 out of reset */ > -- > 2.29.2 >
