Description:
Trigger Page 1 is used store information about master triggers.
Below are the master triggers conditions.
Bit[3] Trigger condition for Device Removal event
Bit[2] Trigger condition for TM command issued by driver
Bit[1] Trigger condition for Adapter reset issued by driver
Bit[0] Trigger condition for IOC Fault state
During driver load:
If Master trigger type bit is enabled in the Persistent Trigger Page0
then read the Persistent Trigger Page1 and update the ioc instances
diag_trigger_master.MasterData with Persistent Trigger Page1's
MasterTriggerFlags. This will restores the Master trigger type's
triggers which are enabled before.
When user modifies the Master trigger type triggers:
When user sets/clears the Master trigger type triggers then driver
fisrt checks whether IOC firmware supports trigger pages support
or not. if firmware supports these pages then driver enables the
Master trigger type bit in Persistent Trigger Page0 (if it was not
enabled before) and updates the user provided trigger values in
Persistent Trigger Page1.
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 46 ++++++++
drivers/scsi/mpt3sas/mpt3sas_base.h | 3 +
drivers/scsi/mpt3sas/mpt3sas_config.c | 151 ++++++++++++++++++++++++++
3 files changed, 200 insertions(+)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 919070b..2c13078 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -4797,6 +4797,42 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc)
}
}
+/**
+ * _base_get_master_diag_triggers - get master diag trigger values from
+ * persistent pages
+ * @ioc : per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi26DriverTriggerPage1_t trigger_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ int r;
+ u16 ioc_status;
+
+ r = mpt3sas_config_get_driver_trigger_pg1(ioc, &mpi_reply,
+ &trigger_pg1);
+ if (r)
+ return;
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ dinitprintk(ioc,
+ ioc_err(ioc,
+ "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n",
+ __func__, ioc_status));
+ return;
+ }
+
+ if (le16_to_cpu(trigger_pg1.NumMasterTrigger))
+ ioc->diag_trigger_master.MasterData |=
+ le32_to_cpu(
+ trigger_pg1.MasterTriggers[0].MasterTriggerFlags);
+}
+
/**
* _base_check_for_trigger_pages_support - checks whether HBA FW supports
* driver trigger pages or not
@@ -4843,10 +4879,20 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
*/
ioc->diag_trigger_master.MasterData =
(MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
+
trigger_flags = _base_check_for_trigger_pages_support(ioc);
if (trigger_flags < 0)
return;
+
ioc->supports_trigger_pages = 1;
+
+ /*
+ * Retrieve master diag trigger values from driver trigger pg1
+ * if master trigger bit enabled in TriggerFlags.
+ */
+ if ((u16)trigger_flags &
+ MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID)
+ _base_get_master_diag_triggers(ioc);
}
/**
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 83b6308..9f5983c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1822,6 +1822,9 @@ int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc,
int
mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page);
+int
+mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page);
/* ctl shared API */
extern struct device_attribute *mpt3sas_host_attrs[];
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 9f7d4cd..86d1643 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -1876,6 +1876,157 @@ mpt3sas_config_update_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
return 0;
}
+/**
+ * mpt3sas_config_get_driver_trigger_pg1 - obtain driver trigger page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+ mpi_request.ExtPageType =
+ MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+ mpi_request.Header.PageNumber = 1;
+ mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+ out:
+ return r;
+}
+
+/**
+ * mpt3sas_config_set_driver_trigger_pg1 - write driver trigger page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+_config_set_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+ mpi_request.ExtPageType =
+ MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+ mpi_request.Header.PageNumber = 1;
+ mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+ out:
+ return r;
+}
+
+/**
+ * mpt3sas_config_update_driver_trigger_pg1 - update driver trigger page 1
+ * @ioc: per adapter object
+ * @trigger_flags: trigger type bit map
+ * @set: set ot clear trigger values
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+ struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set)
+{
+ Mpi26DriverTriggerPage1_t tg_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ int rc;
+ u16 ioc_status;
+
+ rc = mpt3sas_config_update_driver_trigger_pg0(ioc,
+ MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID, set);
+ if (rc)
+ return rc;
+
+ rc = mpt3sas_config_get_driver_trigger_pg1(ioc, &mpi_reply, &tg_pg1);
+ if (rc)
+ goto out;
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ dcprintk(ioc,
+ ioc_err(ioc,
+ "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n",
+ __func__, ioc_status));
+ rc = -EFAULT;
+ goto out;
+ }
+
+ if (set) {
+ tg_pg1.NumMasterTrigger = cpu_to_le16(1);
+ tg_pg1.MasterTriggers[0].MasterTriggerFlags = cpu_to_le32(
+ master_tg->MasterData);
+ } else {
+ tg_pg1.NumMasterTrigger = 0;
+ tg_pg1.MasterTriggers[0].MasterTriggerFlags = 0;
+ }
+
+ rc = _config_set_driver_trigger_pg1(ioc, &mpi_reply, &tg_pg1);
+ if (rc)
+ goto out;
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ dcprintk(ioc,
+ ioc_err(ioc,
+ "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n",
+ __func__, ioc_status));
+ rc = -EFAULT;
+ goto out;
+ }
+
+ return 0;
+
+out:
+ mpt3sas_config_update_driver_trigger_pg0(ioc,
+ MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID, !set);
+
+ return rc;
+}
+
/**
* mpt3sas_config_get_volume_handle - returns volume handle for give hidden
* raid components
--
2.18.4
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
