Gentle reminder.
Regards,
Gulam Mohamed.
-----Original Message-----
From: Gulam Mohamed
Sent: Thursday, November 5, 2020 11:11 AM
To: Lee Duncan <lduncan@xxxxxxxx>; Chris Leech <cleech@xxxxxxxxxx>; James E.J. Bottomley <jejb@xxxxxxxxxxxxx>; Martin K. Petersen <martin.petersen@xxxxxxxxxx>; open-iscsi@xxxxxxxxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Cc: Junxiao Bi <junxiao.bi@xxxxxxxxxx>
Subject: [PATCH] iscsi: Do Not set param when sock is NULL
Description
=========
1. This Kernel panic could be due to a timing issue when there is a race between the sync thread and the initiator was processing of a login response from the target. The session re-open can be invoked from two places
a. Sessions sync thread when the iscsid restart
b. From iscsid through iscsi error handler
2. The session reopen sequence is as follows in user-space (iscsi-initiator-utils)
a. Disconnect the connection
b. Then send the stop connection request to the kernel which releases the connection (releases the socket)
c. Queues the reopen for 2 seconds delay
d. Once the delay expires, create the TCP connection again by calling the connect() call
e. Poll for the connection
f. When poll is successful i.e when the TCP connection is established, it performs
i. Creation of session and connection data structures
ii. Bind the connection to the session. This is the place where we assign the sock to tcp_sw_conn->sock
iii. Sets the parameters like target name, persistent address etc .
iv. Creates the login pdu
v. Sends the login pdu to kernel
vi. Returns to the main loop to process further events. The kernel then sends the login request over to the target node
g. Once login response with success is received, it enters into full feature phase and sets the negotiable parameters like max_recv_data_length, max_transmit_length, data_digest etc . 3. While setting the negotiable parameters by calling "iscsi_session_set_neg_params()", kernel panicked as sock was NULL
What happened here is
--------------------------------
1. Before initiator received the login response mentioned in above point 2.f.v, another reopen request was sent from the error handler/sync session for the same session, as the initiator utils was in main loop to process further events (as
mentioned in point 2.f.vi above).
2. While processing this reopen, it stopped the connection which released the socket and queued this connection and at this point of time the login response was received for the earlier one
3. The kernel passed over this response to user-space which then sent the set_neg_params request to kernel
4. As the connection was stopped, the sock was NULL and hence while the kernel was processing the set param request from user-space, it panicked
Fix
----
1. While setting the set_param in kernel, we need to check if sock is NULL
2. If the sock is NULL, then return EPERM (operation not permitted)
3. Due to this error handler will be invoked in user-space again to recover the session
Signed-off-by: Gulam Mohamed <gulam.mohamed@xxxxxxxxxx>
Reviewed-by: Junxiao Bi <junxiao.bi@xxxxxxxxxx>
---
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index df47557a02a3..fd668a194053 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -711,6 +711,12 @@ static int iscsi_sw_tcp_conn_set_param(struct iscsi_cls_conn *cls_conn,
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data;
+ if (!tcp_sw_conn->sock) {
+ iscsi_conn_printk(KERN_ERR, conn,
+ "Cannot set param as sock is NULL\n");
+ return -ENOTCONN;
+ }
+
switch(param) {
case ISCSI_PARAM_HDRDGST_EN:
iscsi_set_param(cls_conn, param, buf, buflen);
--
2.18.4
