To setup up common use by the SCSI and NVME io paths, create a new
routine that issues FCP io commands which can be used by either protocol.
The new routine addresses sli-3 vs sli-4 differences within its
implementation.
Replace the (sli-3 centric) iocb routine in the scsi path with this new
wqe-centric common routine.
Co-developed-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc.h | 3 ++
drivers/scsi/lpfc/lpfc_crtn.h | 2 +
drivers/scsi/lpfc/lpfc_scsi.c | 6 ++-
drivers/scsi/lpfc/lpfc_sli.c | 87 +++++++++++++++++++++++++++++++++++
4 files changed, 96 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 2b92aa7a0762..63a87c103bc5 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -669,6 +669,9 @@ struct lpfc_hba {
int (*__lpfc_sli_issue_iocb)
(struct lpfc_hba *, uint32_t,
struct lpfc_iocbq *, uint32_t);
+ int (*__lpfc_sli_issue_fcp_io)
+ (struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag);
void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
struct lpfc_iocbq *);
int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 03560478f2ce..2b1540c0c82e 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -320,6 +320,8 @@ void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_sli4_unreg_rpi_cmpl_clr(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
struct lpfc_iocbq *, uint32_t);
+int lpfc_sli_issue_fcp_io(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag);
int lpfc_sli4_issue_wqe(struct lpfc_hba *phba, struct lpfc_sli4_hdw_queue *qp,
struct lpfc_iocbq *pwqe);
struct lpfc_sglq *__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xri);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index bd605bb87dfc..5ec1fc1372fa 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -4634,8 +4634,10 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
if (unlikely(phba->hdwqstat_on & LPFC_CHECK_SCSI_IO))
this_cpu_inc(phba->sli4_hba.c_stat->xmt_io);
#endif
- err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
- &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
+ /* Issue IO to adapter */
+ err = lpfc_sli_issue_fcp_io(phba, LPFC_FCP_RING,
+ &lpfc_cmd->cur_iocbq,
+ SLI_IOCB_RET_IOCB);
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
if (start) {
lpfc_cmd->ts_cmd_start = start;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index b1d5b4484015..31c524a3373f 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -276,6 +276,7 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe128 *wqe)
/* sanity check on queue memory */
if (unlikely(!q))
return -ENOMEM;
+
temp_wqe = lpfc_sli4_qe(q, q->host_index);
/* If the host has not yet processed the next entry then we are done */
@@ -10228,6 +10229,71 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
return 0;
}
+/**
+ * __lpfc_sli_issue_fcp_io_s3 - SLI3 device for sending fcp io iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue wqe on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_fcp_io_s3 is wrapper function to invoke lockless func to
+ * send an iocb command to an HBA with SLI-4 interface spec.
+ *
+ * This function takes the hbalock before invoking the lockless version.
+ * The function will return success after it successfully submit the wqe to
+ * firmware or after adding to the txq.
+ **/
+static int
+__lpfc_sli_issue_fcp_io_s3(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ unsigned long iflags;
+ int rc;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ return rc;
+}
+
+/**
+ * __lpfc_sli_issue_fcp_io_s4 - SLI4 device for sending fcp io wqe
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue wqe on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_fcp_io_s4 is used by other functions in the driver to issue
+ * an wqe command to an HBA with SLI-4 interface spec.
+ *
+ * This function is a lockless version. The function will return success
+ * after it successfully submit the wqe to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_fcp_io_s4(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ struct lpfc_sli_ring *pring;
+ struct lpfc_queue *eq;
+ unsigned long iflags;
+ int rc;
+
+ eq = phba->sli4_hba.hdwq[piocb->hba_wqidx].hba_eq;
+
+ pring = lpfc_sli4_calc_ring(phba, piocb);
+ if (unlikely(pring == NULL))
+ return IOCB_ERROR;
+
+ spin_lock_irqsave(&pring->ring_lock, iflags);
+ rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+ spin_unlock_irqrestore(&pring->ring_lock, iflags);
+
+ lpfc_sli4_poll_eq(eq, LPFC_POLL_FASTPATH);
+ return rc;
+}
+
/**
* __lpfc_sli_issue_iocb_s4 - SLI4 device lockless ver of lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
@@ -10324,6 +10390,25 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
return 0;
}
+/**
+ * lpfc_sli_issue_fcp_io - Wrapper func for issuing fcp i/o
+ *
+ * This routine wraps the actual fcp i/o function for issusing WQE for sli-4
+ * or IOCB for sli-3 function.
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * IOCB_ERROR - Error
+ * IOCB_SUCCESS - Success
+ * IOCB_BUSY - Busy
+ **/
+int
+lpfc_sli_issue_fcp_io(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ return phba->__lpfc_sli_issue_fcp_io(phba, ring_number, piocb, flag);
+}
+
/*
* __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
*
@@ -10359,10 +10444,12 @@ lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
case LPFC_PCI_DEV_LP:
phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
+ phba->__lpfc_sli_issue_fcp_io = __lpfc_sli_issue_fcp_io_s3;
break;
case LPFC_PCI_DEV_OC:
phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s4;
phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s4;
+ phba->__lpfc_sli_issue_fcp_io = __lpfc_sli_issue_fcp_io_s4;
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
--
2.26.2
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
