Re: [PATCH] scsi: ufs: Try to save power mode change and UIC cmd completion timeout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sorry, please ignore this specific change, which is wrongly sent out.

On 2020-11-03 14:24, Can Guo wrote:
Use the uic_cmd->cmd_active as a flag to track the lifecycle of an UIC cmd. The flag is set before send the UIC cmd and cleared after the completion is raised in IRQ handler. For a power mode change operation, including hibern8 enter/exit, the flag is cleared only after hba->uic_async_done completion is raised. When completion timeout happens, if the flag is cleared, instead
of returning timeout error, simply ignore it.

Change-Id: Ie3cd6ae6221a44619925fb2cf78136a5617fdd5d
Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
---
 drivers/scsi/ufs/ufshcd.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 252e022..8b291c3 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2131,10 +2131,20 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba,
struct uic_command *uic_cmd)
 	unsigned long flags;

 	if (wait_for_completion_timeout(&uic_cmd->done,
-					msecs_to_jiffies(UIC_CMD_TIMEOUT)))
+					msecs_to_jiffies(UIC_CMD_TIMEOUT))) {
 		ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
-	else
+	} else {
 		ret = -ETIMEDOUT;
+		dev_err(hba->dev,
+			"uic cmd 0x%x with arg3 0x%x completion timeout\n",
+			uic_cmd->command, uic_cmd->argument3);
+
+		if (!uic_cmd->cmd_active) {
+ dev_err(hba->dev, "%s: UIC cmd has been completed, return the result\n",
+				__func__);
+			ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
+		}
+	}

 	spin_lock_irqsave(hba->host->host_lock, flags);
 	hba->active_uic_cmd = NULL;
@@ -2166,6 +2176,7 @@ __ufshcd_send_uic_cmd(struct ufs_hba *hba,
struct uic_command *uic_cmd,
 	if (completion)
 		init_completion(&uic_cmd->done);

+	uic_cmd->cmd_active = 1;
 	ufshcd_dispatch_uic_cmd(hba, uic_cmd);

 	return 0;
@@ -3944,10 +3955,18 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba
*hba, struct uic_command *cmd)
 		dev_err(hba->dev,
 			"pwr ctrl cmd 0x%x with mode 0x%x completion timeout\n",
 			cmd->command, cmd->argument3);
+
+		if (!cmd->cmd_active) {
+			dev_err(hba->dev, "%s: Power Mode Change operation has been
completed, go check UPMCRS\n",
+				__func__);
+			goto check_upmcrs;
+		}
+
 		ret = -ETIMEDOUT;
 		goto out;
 	}

+check_upmcrs:
 	status = ufshcd_get_upmcrs(hba);
 	if (status != PWR_LOCAL) {
 		dev_err(hba->dev,
@@ -5060,11 +5079,14 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct
ufs_hba *hba, u32 intr_status)
 		hba->active_uic_cmd->argument3 =
 			ufshcd_get_dme_attr_val(hba);
 		complete(&hba->active_uic_cmd->done);
+		if (!hba->uic_async_done)
+			hba->active_uic_cmd->cmd_active = 0;
 		retval = IRQ_HANDLED;
 	}

 	if ((intr_status & UFSHCD_UIC_PWR_MASK) && hba->uic_async_done) {
 		complete(hba->uic_async_done);
+		hba->active_uic_cmd->cmd_active = 0;
 		retval = IRQ_HANDLED;
 	}
 	return retval;



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux