[PATCH v4 22/29] scsi: 3w-9xxx: use generic power management

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.

Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@xxxxxxxxx>
---
 drivers/scsi/3w-9xxx.c | 29 +++++++----------------------
 1 file changed, 7 insertions(+), 22 deletions(-)

diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index e458e99ff161..b4718a1b2bd6 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -2191,10 +2191,10 @@ static void twa_remove(struct pci_dev *pdev)
 	twa_device_extension_count--;
 } /* End twa_remove() */
 
-#ifdef CONFIG_PM
 /* This function is called on PCI suspend */
-static int twa_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused twa_suspend(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct Scsi_Host *host = pci_get_drvdata(pdev);
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
 
@@ -2214,31 +2214,19 @@ static int twa_suspend(struct pci_dev *pdev, pm_message_t state)
 	}
 	TW_CLEAR_ALL_INTERRUPTS(tw_dev);
 
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
 	return 0;
 } /* End twa_suspend() */
 
 /* This function is called on PCI resume */
-static int twa_resume(struct pci_dev *pdev)
+static int __maybe_unused twa_resume(struct device *dev)
 {
 	int retval = 0;
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct Scsi_Host *host = pci_get_drvdata(pdev);
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
 
 	printk(KERN_WARNING "3w-9xxx: Resuming host %d.\n", tw_dev->host->host_no);
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
 
-	retval = pci_enable_device(pdev);
-	if (retval) {
-		TW_PRINTK(tw_dev->host, TW_DRIVER, 0x39, "Enable device failed during resume");
-		return retval;
-	}
-
-	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
 
 	retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
@@ -2276,11 +2264,9 @@ static int twa_resume(struct pci_dev *pdev)
 
 out_disable_device:
 	scsi_remove_host(host);
-	pci_disable_device(pdev);
 
 	return retval;
 } /* End twa_resume() */
-#endif
 
 /* PCI Devices supported by this driver */
 static struct pci_device_id twa_pci_tbl[] = {
@@ -2296,16 +2282,15 @@ static struct pci_device_id twa_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, twa_pci_tbl);
 
+static SIMPLE_DEV_PM_OPS(twa_pm_ops, twa_suspend, twa_resume);
+
 /* pci_driver initializer */
 static struct pci_driver twa_driver = {
 	.name		= "3w-9xxx",
 	.id_table	= twa_pci_tbl,
 	.probe		= twa_probe,
 	.remove		= twa_remove,
-#ifdef CONFIG_PM
-	.suspend	= twa_suspend,
-	.resume		= twa_resume,
-#endif
+	.driver.pm	= &twa_pm_ops,
 	.shutdown	= twa_shutdown
 };
 
-- 
2.28.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux