Re: LSI Logic 40919o fibre channel: scsi works ip not

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Shirron, Stephen ha scritto:
Hi Mario,

Can you tell me what firmware version you have on your 40919
card(s)?  The easiest way is to "cat /proc/mpt/summary".

This is summary:
ioc0: LSIFC919, FwRev=02000f00h, Ports=1, MaxQ=1023,LanAddr=00:06:2B:07:FA:10, IRQ=209



How often do the errors occur?  dmesg provides no timestamps,
while /var/log/messages does.

Sorry but in messagese there is not this error. I can say you that the frequency of the error is proportional to data transferred. If I start a n ftp dmesg output goes crazy.

I have seen this in /var/log/messages (sorry no timestamps again):


Fusion MPT LAN driver 3.04.01
mptlan: ioc0: PortNum=0, ProtocolFlags=0Fh (ITLB)
mptlan: ioc0: Fusion MPT LAN device registered as 'fc0'
mptlan: ioc0/fc0: LanAddr = 00:06:2B:07:FA:10
mptlan: ioc0/fc0: interface up & active
mptbase: ioc0: LogInfo(0x22000002): SubCl={LAN}
mptlan: ioc0/fc0: ERROR - Got a non-TURBO ReceivePostReply w/ PacketLength zero!
mptlan: MsgFlags = 80, IOCStatus = 8003
mptbase: ioc0: LogInfo(0x22000002): SubCl={LAN}
mptlan: ioc0/fc0: ERROR - Got a non-TURBO ReceivePostReply w/ PacketLength zero!
mptlan: MsgFlags = 80, IOCStatus = 8003
mptbase: ioc0: LogInfo(0x22000002): SubCl={LAN}
mptlan: ioc0/fc0: ERROR - Got a non-TURBO ReceivePostReply w/ PacketLength zero!
mptlan: MsgFlags = 80, IOCStatus = 8003
mptbase: ioc0: LogInfo(0x22000002): SubCl={LAN}
mptlan: ioc0/fc0: ERROR - Got a non-TURBO ReceivePostReply w/ PacketLength zero!
mptlan: MsgFlags = 80, IOCStatus = 8003
mptbase: ioc0: LogInfo(0x22000002): SubCl={LAN}
mptlan: ioc0/fc0: ERROR - Got a non-TURBO ReceivePostReply w/ PacketLength zero!
mptlan: MsgFlags = 80, IOCStatus = 8003
mptbase: ioc0: LogInfo(0x22000002): SubCl={LAN}
mptlan: ioc0/fc0: ERROR - Got a non-TURBO ReceivePostReply w/ PacketLength zero!
mptlan: MsgFlags = 80, IOCStatus = 8003
mptbase: ioc0: LogInfo(0x22000002): SubCl={LAN}
mptlan: ioc0/fc0: ERROR - Got a non-TURBO ReceivePostReply w/ PacketLength zero!
mptlan: MsgFlags = 80, IOCStatus = 8003
mptbase: ioc0: LogInfo(0x22000002): SubCl={LAN}
mptlan: ioc0/fc0: ERROR - Got a non-TURBO ReceivePostReply w/ PacketLength zero!
mptlan: MsgFlags = 80, IOCStatus = 8003
mptbase: ioc0: LogInfo(0x22000002): SubCl={LAN}
mptlan: ioc0/fc0: ERROR - Got a non-TURBO ReceivePostReply w/ PacketLength zero!
mptlan: MsgFlags = 80, IOCStatus = 8003




-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux