[PATCH 04/14] mpt3sas: Update hba_port's sas_address & phy_mask

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update hba_port's sas_address & phy_mask fields whenever
a direct expander or sas/sata target devices are
added or removed.

- When any direct attached device is discovered then driver
        - gets the hba_port object corresponding to device's
          PhysicalPort number,
        - update's the hba_port's sas_address field with
          device's SAS Address,
        - update's the hba_port's phy_mask filed with device's
          narrow/wide port Phy number bits.

        Also,
        - if any sas/sata end device (not only direct
          direct attached devices) is added then
          corresponding sas_device object's port variable
          is assigned with hba_port object's address who's
          port_id matches with device's PhysicalPort number.
        - if any expander device is added then corresponding
          sas_expander object's port variable is assigned
          with hba_port object's address who's port_id
          matches with expander device's PhysicalPort number.

- When any direct attached device is detached then driver
  will delete the hba_port object's corresponding to
  device's PhysicalPort number.

- Whenever any HBA phy's link (of direct attached device's port)
  comes up then update the phy_mask field of corresponding
  hba_port object.

- Added a new function parameter named 'port' of type
  struct hba_port to below functions,
  * mpt3sas_transport_port_add()
  * mpt3sas_transport_port_remove()
  * mpt3sas_transport_update_links()

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
---
 drivers/scsi/mpt3sas/mpt3sas_base.h      |  7 +-
 drivers/scsi/mpt3sas/mpt3sas_scsih.c     | 81 ++++++++++++++++++------
 drivers/scsi/mpt3sas/mpt3sas_transport.c | 65 +++++++++++++++++--
 3 files changed, 126 insertions(+), 27 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 2dde574..aef872a 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1792,16 +1792,17 @@ extern struct scsi_transport_template *mpt3sas_transport_template;
 u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 	u32 reply);
 struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc,
-	u16 handle, u64 sas_address);
+	u16 handle, u64 sas_address, struct hba_port *port);
 void mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
-	u64 sas_address_parent);
+	u64 sas_address_parent, struct hba_port *port);
 int mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
 	*mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev);
 int mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc,
 	struct _sas_phy *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1,
 	struct device *parent_dev);
 void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc,
-	u64 sas_address, u16 handle, u8 phy_number, u8 link_rate);
+	u64 sas_address, u16 handle, u8 phy_number, u8 link_rate,
+	struct hba_port *port);
 extern struct sas_function_template mpt3sas_transport_functions;
 extern struct scsi_transport_template *mpt3sas_transport_template;
 /* trigger data externs */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index e8ffe1e..0067025 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -908,7 +908,7 @@ _scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc,
 	}
 
 	if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
-	     sas_device->sas_address_parent)) {
+	     sas_device->sas_address_parent, sas_device->port)) {
 		_scsih_sas_device_remove(ioc, sas_device);
 	} else if (!sas_device->starget) {
 		/*
@@ -919,7 +919,8 @@ _scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc,
 		if (!ioc->is_driver_loading) {
 			mpt3sas_transport_port_remove(ioc,
 			    sas_device->sas_address,
-			    sas_device->sas_address_parent);
+			    sas_device->sas_address_parent,
+			    sas_device->port);
 			_scsih_sas_device_remove(ioc, sas_device);
 		}
 	} else
@@ -1768,6 +1769,7 @@ scsih_target_alloc(struct scsi_target *starget)
 		if (pcie_device) {
 			sas_target_priv_data->handle = pcie_device->handle;
 			sas_target_priv_data->sas_address = pcie_device->wwid;
+			sas_target_priv_data->port = NULL;
 			sas_target_priv_data->pcie_dev = pcie_device;
 			pcie_device->starget = starget;
 			pcie_device->id = starget->id;
@@ -1791,6 +1793,7 @@ scsih_target_alloc(struct scsi_target *starget)
 	if (sas_device) {
 		sas_target_priv_data->handle = sas_device->handle;
 		sas_target_priv_data->sas_address = sas_device->sas_address;
+		sas_target_priv_data->port = sas_device->port;
 		sas_target_priv_data->sas_dev = sas_device;
 		sas_device->starget = starget;
 		sas_device->id = starget->id;
@@ -5804,7 +5807,8 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
 			link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
 		ioc->sas_hba.phy[i].port = mpt3sas_get_port_by_id(ioc, port_id);
 		mpt3sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
-		    attached_handle, i, link_rate);
+		    attached_handle, i, link_rate,
+		    ioc->sas_hba.phy[i].port);
 	}
  out:
 	kfree(sas_iounit_pg0);
@@ -5994,6 +5998,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	int i;
 	unsigned long flags;
 	struct _sas_port *mpt3sas_port = NULL;
+	u8 port_id;
 
 	int rc = 0;
 
@@ -6026,6 +6031,8 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 			__FILE__, __LINE__, __func__);
 		return -1;
 	}
+
+	port_id = expander_pg0.PhysicalPort;
 	if (sas_address_parent != ioc->sas_hba.sas_address) {
 		spin_lock_irqsave(&ioc->sas_node_lock, flags);
 		sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
@@ -6059,6 +6066,13 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	sas_expander->num_phys = expander_pg0.NumPhys;
 	sas_expander->sas_address_parent = sas_address_parent;
 	sas_expander->sas_address = sas_address;
+	sas_expander->port = mpt3sas_get_port_by_id(ioc, port_id);
+	if (!sas_expander->port) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		rc = -1;
+		goto out_fail;
+	}
 
 	ioc_info(ioc, "expander_add: handle(0x%04x), parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
 		 handle, parent_handle,
@@ -6077,7 +6091,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 
 	INIT_LIST_HEAD(&sas_expander->sas_port_list);
 	mpt3sas_port = mpt3sas_transport_port_add(ioc, handle,
-	    sas_address_parent);
+	    sas_address_parent, sas_expander->port);
 	if (!mpt3sas_port) {
 		ioc_err(ioc, "failure at %s:%d/%s()!\n",
 			__FILE__, __LINE__, __func__);
@@ -6096,6 +6110,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 		}
 		sas_expander->phy[i].handle = handle;
 		sas_expander->phy[i].phy_id = i;
+		sas_expander->phy[i].port = mpt3sas_get_port_by_id(ioc, port_id);
 
 		if ((mpt3sas_transport_add_expander_phy(ioc,
 		    &sas_expander->phy[i], expander_pg1,
@@ -6123,7 +6138,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 
 	if (mpt3sas_port)
 		mpt3sas_transport_port_remove(ioc, sas_expander->sas_address,
-		    sas_address_parent);
+		    sas_address_parent, sas_expander->port);
 	kfree(sas_expander);
 	return rc;
 }
@@ -6388,6 +6403,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
 	u32 ioc_status;
 	u64 sas_address;
 	u32 device_info;
+	u8 port_id;
 
 	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
 	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
@@ -6424,6 +6440,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
 	    sas_device_pg0.AccessStatus))
 		return -1;
 
+	port_id = sas_device_pg0.PhysicalPort;
 	sas_device = mpt3sas_get_sdev_by_addr(ioc,
 					sas_address);
 	if (sas_device) {
@@ -6466,6 +6483,12 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
 	sas_device->phy = sas_device_pg0.PhyNum;
 	sas_device->fast_path = (le16_to_cpu(sas_device_pg0.Flags) &
 	    MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
+	sas_device->port = mpt3sas_get_port_by_id(ioc, port_id);
+	if (!sas_device->port) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		goto out;
+	}
 
 	if (le16_to_cpu(sas_device_pg0.Flags)
 		& MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
@@ -6499,6 +6522,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
 	else
 		_scsih_sas_device_add(ioc, sas_device);
 
+out:
 	sas_device_put(sas_device);
 	return 0;
 }
@@ -6539,7 +6563,8 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
 	if (!ioc->hide_drives)
 		mpt3sas_transport_port_remove(ioc,
 		    sas_device->sas_address,
-		    sas_device->sas_address_parent);
+		    sas_device->sas_address_parent,
+		    sas_device->port);
 
 	ioc_info(ioc, "removing handle(0x%04x), sas_addr(0x%016llx)\n",
 		 sas_device->handle, (u64)sas_device->sas_address);
@@ -6650,6 +6675,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
 	u64 sas_address;
 	unsigned long flags;
 	u8 link_rate, prev_link_rate;
+	struct hba_port *port;
 	Mpi2EventDataSasTopologyChangeList_t *event_data =
 		(Mpi2EventDataSasTopologyChangeList_t *)
 		fw_event->event_data;
@@ -6671,6 +6697,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
 	}
 
 	parent_handle = le16_to_cpu(event_data->ExpanderDevHandle);
+	port = mpt3sas_get_port_by_id(ioc, event_data->PhysicalPort);
 
 	/* handle expander add */
 	if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED)
@@ -6683,6 +6710,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
 	if (sas_expander) {
 		sas_address = sas_expander->sas_address;
 		max_phys = sas_expander->num_phys;
+		port = sas_expander->port;
 	} else if (parent_handle < ioc->sas_hba.num_phys) {
 		sas_address = ioc->sas_hba.sas_address;
 		max_phys = ioc->sas_hba.num_phys;
@@ -6725,7 +6753,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
 				break;
 
 			mpt3sas_transport_update_links(ioc, sas_address,
-			    handle, phy_number, link_rate);
+			    handle, phy_number, link_rate, port);
 
 			if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
 				break;
@@ -6744,7 +6772,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
 				break;
 
 			mpt3sas_transport_update_links(ioc, sas_address,
-			    handle, phy_number, link_rate);
+			    handle, phy_number, link_rate, port);
 
 			_scsih_add_device(ioc, handle, phy_number, 0);
 
@@ -8300,7 +8328,8 @@ _scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc,
 	parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
 	if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
 		mpt3sas_transport_update_links(ioc, sas_address, handle,
-		    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+		    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5,
+		    mpt3sas_get_port_by_id(ioc, sas_device_pg0.PhysicalPort));
 
 	_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
 	_scsih_add_device(ioc, handle, 0, 1);
@@ -8606,7 +8635,9 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
 		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
 		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
 			mpt3sas_transport_update_links(ioc, sas_address, handle,
-			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5,
+			    mpt3sas_get_port_by_id(ioc,
+			    sas_device_pg0.PhysicalPort));
 
 		_scsih_add_device(ioc, handle, 0, 1);
 
@@ -9345,7 +9376,8 @@ _scsih_refresh_expander_links(struct MPT3SAS_ADAPTER *ioc,
 
 		mpt3sas_transport_update_links(ioc, sas_expander->sas_address,
 		    le16_to_cpu(expander_pg1.AttachedDevHandle), i,
-		    expander_pg1.NegotiatedLinkRate >> 4);
+		    expander_pg1.NegotiatedLinkRate >> 4,
+		    sas_expander->port);
 	}
 }
 
@@ -9364,7 +9396,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 	Mpi2RaidPhysDiskPage0_t pd_pg0;
 	Mpi2EventIrConfigElement_t element;
 	Mpi2ConfigReply_t mpi_reply;
-	u8 phys_disk_num;
+	u8 phys_disk_num, port_id;
 	u16 ioc_status;
 	u16 handle, parent_handle;
 	u64 sas_address;
@@ -9454,9 +9486,11 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 			ioc_info(ioc, "\tBEFORE adding phys disk: handle (0x%04x), sas_addr(0x%016llx)\n",
 				 handle,
 				 (u64)le64_to_cpu(sas_device_pg0.SASAddress));
+			port_id = sas_device_pg0.PhysicalPort;
 			mpt3sas_transport_update_links(ioc, sas_address,
 			    handle, sas_device_pg0.PhyNum,
-			    MPI2_SAS_NEG_LINK_RATE_1_5);
+			    MPI2_SAS_NEG_LINK_RATE_1_5,
+			    mpt3sas_get_port_by_id(ioc, port_id));
 			set_bit(handle, ioc->pd_handles);
 			retry_count = 0;
 			/* This will retry adding the end device.
@@ -9542,6 +9576,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 		if (!(_scsih_is_end_device(
 		    le32_to_cpu(sas_device_pg0.DeviceInfo))))
 			continue;
+		port_id = sas_device_pg0.PhysicalPort;
 		sas_device = mpt3sas_get_sdev_by_addr(ioc,
 		    le64_to_cpu(sas_device_pg0.SASAddress));
 		if (sas_device) {
@@ -9554,7 +9589,8 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
 				 handle,
 				 (u64)le64_to_cpu(sas_device_pg0.SASAddress));
 			mpt3sas_transport_update_links(ioc, sas_address, handle,
-			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5,
+			    mpt3sas_get_port_by_id(ioc, port_id));
 			retry_count = 0;
 			/* This will retry adding the end device.
 			 * _scsih_add_device() will decide on retries and
@@ -9997,7 +10033,7 @@ _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
 	}
 
 	mpt3sas_transport_port_remove(ioc, sas_expander->sas_address,
-	    sas_expander->sas_address_parent);
+	    sas_expander->sas_address_parent, sas_expander->port);
 
 	ioc_info(ioc, "expander_remove: handle(0x%04x), sas_addr(0x%016llx)\n",
 		 sas_expander->handle, (unsigned long long)
@@ -10341,6 +10377,7 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc)
 	unsigned long flags;
 	int rc;
 	int tid;
+	struct hba_port *port;
 
 	 /* no Bios, return immediately */
 	if (!ioc->bios_pg3.BiosVersion)
@@ -10382,19 +10419,24 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc)
 		handle = sas_device->handle;
 		sas_address_parent = sas_device->sas_address_parent;
 		sas_address = sas_device->sas_address;
+		port = sas_device->port;
 		list_move_tail(&sas_device->list, &ioc->sas_device_list);
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
 		if (ioc->hide_drives)
 			return;
+
+		if (!port)
+			return;
+
 		if (!mpt3sas_transport_port_add(ioc, handle,
-		    sas_address_parent)) {
+		    sas_address_parent, port)) {
 			_scsih_sas_device_remove(ioc, sas_device);
 		} else if (!sas_device->starget) {
 			if (!ioc->is_driver_loading) {
 				mpt3sas_transport_port_remove(ioc,
 				    sas_address,
-				    sas_address_parent);
+				    sas_address_parent, port);
 				_scsih_sas_device_remove(ioc, sas_device);
 			}
 		}
@@ -10482,7 +10524,7 @@ _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
 
 	while ((sas_device = get_next_sas_device(ioc))) {
 		if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
-		    sas_device->sas_address_parent)) {
+		    sas_device->sas_address_parent, sas_device->port)) {
 			_scsih_sas_device_remove(ioc, sas_device);
 			sas_device_put(sas_device);
 			continue;
@@ -10496,7 +10538,8 @@ _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
 			if (!ioc->is_driver_loading) {
 				mpt3sas_transport_port_remove(ioc,
 				    sas_device->sas_address,
-				    sas_device->sas_address_parent);
+				    sas_device->sas_address_parent,
+				    sas_device->port);
 				_scsih_sas_device_remove(ioc, sas_device);
 				sas_device_put(sas_device);
 				continue;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index 6ec5b7f..aab3b14 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -594,6 +594,7 @@ _transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node,
  * @ioc: per adapter object
  * @handle: handle of attached device
  * @sas_address: sas address of parent expander or sas host
+ * @port: hba port entry
  * Context: This function will acquire ioc->sas_node_lock.
  *
  * Adding new port object to the sas_node->sas_port_list.
@@ -602,7 +603,7 @@ _transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node,
  */
 struct _sas_port *
 mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
-	u64 sas_address)
+	u64 sas_address, struct hba_port *hba_port)
 {
 	struct _sas_phy *mpt3sas_phy, *next;
 	struct _sas_port *mpt3sas_port;
@@ -613,6 +614,12 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 	int i;
 	struct sas_port *port;
 
+	if (!hba_port) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return NULL;
+	}
+
 	mpt3sas_port = kzalloc(sizeof(struct _sas_port),
 	    GFP_KERNEL);
 	if (!mpt3sas_port) {
@@ -646,6 +653,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 		goto out_fail;
 	}
 
+	mpt3sas_port->hba_port = hba_port;
 	_transport_sanity_check(ioc, sas_node,
 	    mpt3sas_port->remote_identify.sas_address);
 
@@ -653,8 +661,12 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 		if (sas_node->phy[i].remote_identify.sas_address !=
 		    mpt3sas_port->remote_identify.sas_address)
 			continue;
+		if (sas_node->phy[i].port != hba_port)
+			continue;
 		list_add_tail(&sas_node->phy[i].port_siblings,
 		    &mpt3sas_port->phy_list);
+		if (sas_node->handle <= ioc->sas_hba.num_phys)
+			hba_port->phy_mask |= (1 << i);
 		mpt3sas_port->num_phys++;
 	}
 
@@ -686,14 +698,21 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 			    mpt3sas_phy->phy_id);
 		sas_port_add_phy(port, mpt3sas_phy->phy);
 		mpt3sas_phy->phy_belongs_to_port = 1;
+		mpt3sas_phy->port = hba_port;
 	}
 
 	mpt3sas_port->port = port;
-	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE)
+	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) {
 		rphy = sas_end_device_alloc(port);
-	else
+		if (sas_node->handle <= ioc->sas_hba.num_phys)
+			hba_port->sas_address = sas_device->sas_address;
+	} else {
 		rphy = sas_expander_alloc(port,
 		    mpt3sas_port->remote_identify.device_type);
+		if (sas_node->handle <= ioc->sas_hba.num_phys)
+			hba_port->sas_address =
+			    mpt3sas_port->remote_identify.sas_address;
+	}
 
 	rphy->identify = mpt3sas_port->remote_identify;
 
@@ -751,6 +770,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
  * @ioc: per adapter object
  * @sas_address: sas address of attached device
  * @sas_address_parent: sas address of parent expander or sas host
+ * @port: hba port entry
  * Context: This function will acquire ioc->sas_node_lock.
  *
  * Removing object and freeing associated memory from the
@@ -758,7 +778,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
  */
 void
 mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
-	u64 sas_address_parent)
+	u64 sas_address_parent, struct hba_port *port)
 {
 	int i;
 	unsigned long flags;
@@ -766,6 +786,10 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
 	struct _sas_node *sas_node;
 	u8 found = 0;
 	struct _sas_phy *mpt3sas_phy, *next_phy;
+	struct hba_port *hba_port_next, *hba_port = NULL;
+
+	if (!port)
+		return;
 
 	spin_lock_irqsave(&ioc->sas_node_lock, flags);
 	sas_node = _transport_sas_node_find_by_sas_address(ioc,
@@ -778,6 +802,8 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
 	    port_list) {
 		if (mpt3sas_port->remote_identify.sas_address != sas_address)
 			continue;
+		if (mpt3sas_port->hba_port != port)
+			continue;
 		found = 1;
 		list_del(&mpt3sas_port->port_list);
 		goto out;
@@ -788,6 +814,21 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
 		return;
 	}
 
+	if (sas_node->handle <= ioc->sas_hba.num_phys) {
+		list_for_each_entry_safe(hba_port, hba_port_next,
+		    &ioc->port_table_list, list) {
+			if (hba_port != port)
+				continue;
+			if (hba_port->sas_address != sas_address)
+				continue;
+			ioc_info(ioc,
+			    "remove hba_port entry: %p port: %d from hba_port list\n",
+			    hba_port, hba_port->port_id);
+			list_del(&hba_port->list);
+			kfree(hba_port);
+		}
+	}
+
 	for (i = 0; i < sas_node->num_phys; i++) {
 		if (sas_node->phy[i].remote_identify.sas_address == sas_address)
 			memset(&sas_node->phy[i].remote_identify, 0 ,
@@ -961,14 +1002,19 @@ mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
  * @handle: attached device handle
  * @phy_number: phy number
  * @link_rate: new link rate
+ * @port: hba port entry
+ *
+ * Return nothing.
  */
 void
 mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc,
-	u64 sas_address, u16 handle, u8 phy_number, u8 link_rate)
+	u64 sas_address, u16 handle, u8 phy_number, u8 link_rate,
+	struct hba_port *port)
 {
 	unsigned long flags;
 	struct _sas_node *sas_node;
 	struct _sas_phy *mpt3sas_phy;
+	struct hba_port *hba_port = NULL;
 
 	if (ioc->shost_recovery || ioc->pci_error_recovery)
 		return;
@@ -988,6 +1034,15 @@ mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc,
 		    &mpt3sas_phy->remote_identify);
 		_transport_add_phy_to_an_existing_port(ioc, sas_node,
 		    mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address);
+		if (sas_node->handle <= ioc->sas_hba.num_phys) {
+			list_for_each_entry(hba_port,
+			    &ioc->port_table_list, list) {
+				if (hba_port->sas_address == sas_address &&
+				    hba_port == port)
+					hba_port->phy_mask |=
+					    (1 << mpt3sas_phy->phy_id);
+			}
+		}
 	} else
 		memset(&mpt3sas_phy->remote_identify, 0 , sizeof(struct
 		    sas_identify));
-- 
2.18.4

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux