James Bottomley a écrit :
So if I understand well, the module actively used with the LSI card is
megaraid, the legacy one ! but the mbox and mm are loaded and seems to
be necessary for the legacy driver ?
Actually, it shouldn't be. megaraid_mbox depends on megaraid_mm as your
lsmod shows, which is correct. However, nothing's depending on legacy
megaraid ... I'm not sure why it's showing as loaded and in use.
but it is ! moreover I have a /proc/megaraid/hba1/ directory structure
fully filled with my RAID card, drives, and RAID volumes informations,
and I don't hav any entry in sysfs directory tree (witch is the right
place for megaraid NG module)
I'd like to understand _why_ this module supposed to be independant from
the "new generation" megaraid module needs megaraid NG to be compiled to
work correctly ?
I looked over the sources but I didn't found any link between the legacy
driver and the newgen one... quite strange !
Regards,
--
Rico
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
