[PATCH v3 1/2] scsi: arcmsr: Use upper_32_bits() instead of dma_addr_hi32()

[ching Huang <ching2048@xxxxxxxxxxxx>]

From: ching Huang <ching2048@xxxxxxxxxxxx>

Use upper_32_bits() instead of dma_addr_hi32().

Signed-off-by: ching Huang <ching2048@xxxxxxxxxxxx>
---

diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index d13d672..55d85c9 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -653,9 +653,9 @@ static void arcmsr_hbaF_assign_regAddr(struct AdapterControlBlock *acb)
 		3) >> 2) << 2;
 	pmuF = acb->pmuF;
 	/* host buffer low address, bit0:1 all buffer active */
-	writel((uint32_t)(host_buffer_dma | 1), &pmuF->inbound_msgaddr0);
+	writel(lower_32_bits(host_buffer_dma | 1), &pmuF->inbound_msgaddr0);
 	/* host buffer high address */
-	writel(dma_addr_hi32(host_buffer_dma), &pmuF->inbound_msgaddr1);
+	writel(upper_32_bits(host_buffer_dma), &pmuF->inbound_msgaddr1);
 	/* set host buffer physical address */
 	writel(ARCMSR_HBFMU_DOORBELL_SYNC1, &pmuF->iobound_doorbell);
 }
@@ -4057,11 +4057,8 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
 		writel(cdb_phyaddr, &reg->msgcode_rwbuffer[2]);
 		writel(cdb_phyaddr_hi32, &reg->msgcode_rwbuffer[3]);
 		writel(acb->ccbsize, &reg->msgcode_rwbuffer[4]);
-		dma_coherent_handle = acb->dma_coherent_handle2;
-		cdb_phyaddr = (uint32_t)(dma_coherent_handle & 0xffffffff);
-		cdb_phyaddr_hi32 = (uint32_t)((dma_coherent_handle >> 16) >> 16);
-		writel(cdb_phyaddr, &reg->msgcode_rwbuffer[5]);
-		writel(cdb_phyaddr_hi32, &reg->msgcode_rwbuffer[6]);
+		writel(lower_32_bits(acb->dma_coherent_handle2), &reg->msgcode_rwbuffer[5]);
+		writel(upper_32_bits(acb->dma_coherent_handle2), &reg->msgcode_rwbuffer[6]);
 		writel(acb->ioqueue_size, &reg->msgcode_rwbuffer[7]);
 		writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, &reg->inbound_msgaddr0);
 		acb->out_doorbell ^= ARCMSR_HBEMU_DRV2IOP_MESSAGE_CMD_DONE;
@@ -4081,11 +4078,8 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
 		acb->msgcode_rwbuffer[2] = cdb_phyaddr;
 		acb->msgcode_rwbuffer[3] = cdb_phyaddr_hi32;
 		acb->msgcode_rwbuffer[4] = acb->ccbsize;
-		dma_coherent_handle = acb->dma_coherent_handle2;
-		cdb_phyaddr = (uint32_t)dma_coherent_handle;
-		cdb_phyaddr_hi32 = dma_addr_hi32(dma_coherent_handle);
-		acb->msgcode_rwbuffer[5] = cdb_phyaddr;
-		acb->msgcode_rwbuffer[6] = cdb_phyaddr_hi32;
+		acb->msgcode_rwbuffer[5] = lower_32_bits(acb->dma_coherent_handle2);
+		acb->msgcode_rwbuffer[6] = upper_32_bits(acb->dma_coherent_handle2);
 		acb->msgcode_rwbuffer[7] = acb->completeQ_size;
 		writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, &reg->inbound_msgaddr0);
 		acb->out_doorbell ^= ARCMSR_HBEMU_DRV2IOP_MESSAGE_CMD_DONE;