From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
To support system suspend/resume or runtime suspend/resume, need to use
the function pci_set_power_state() to change the power state which requires
at least method _PS0 or _PR0 be filled by platform for v3 hw. So check
whether the method is supported, if not, add a print to remind.
A Kconfig dependency is added as there is no stub for
acpi_device_power_manageable().
Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/Kconfig | 1 +
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 4 ++++
2 files changed, 5 insertions(+)
diff --git a/drivers/scsi/hisi_sas/Kconfig b/drivers/scsi/hisi_sas/Kconfig
index 13ed9073fc72..b8148b1733f8 100644
--- a/drivers/scsi/hisi_sas/Kconfig
+++ b/drivers/scsi/hisi_sas/Kconfig
@@ -15,5 +15,6 @@ config SCSI_HISI_SAS_PCI
tristate "HiSilicon SAS on PCI bus"
depends on SCSI_HISI_SAS
depends on PCI
+ depends on ACPI
help
This driver supports HiSilicon's SAS HBA based on PCI device
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index fa9db57cc3fc..708b5661b127 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -903,6 +903,7 @@ static int reset_hw_v3_hw(struct hisi_hba *hisi_hba)
static int hw_init_v3_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = hisi_hba->dev;
+ struct acpi_device *acpi_dev;
union acpi_object *obj;
guid_t guid;
int rc;
@@ -933,6 +934,9 @@ static int hw_init_v3_hw(struct hisi_hba *hisi_hba)
else
ACPI_FREE(obj);
+ acpi_dev = ACPI_COMPANION(dev);
+ if (!acpi_device_power_manageable(acpi_dev))
+ dev_notice(dev, "neither _PS0 nor _PR0 is defined\n");
return 0;
}
--
2.26.2
