Re: [PATCH] Rescan the entire target on transport reset when LUN is 0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 28 Aug 2020 12:21:35 +0000, Matej Genci wrote:

> VirtIO 1.0 spec says
>     The removed and rescan events ... when sent for LUN 0, they MAY
>     apply to the entire target so the driver can ask the initiator
>     to rescan the target to detect this.
> 
> This change introduces the behaviour described above by scanning the
> entire scsi target when LUN is set to 0. This is both a functional and a
> performance fix. It aligns the driver with the spec and allows control
> planes to hotplug targets with large numbers of LUNs without having to
> request a RESCAN for each one of them.

Applied to 5.10/scsi-queue, thanks!

[1/1] scsi: virtio_scsi: Rescan the entire target on transport reset when LUN is 0
      https://git.kernel.org/mkp/scsi/c/beef6fd02b90

-- 
Martin K. Petersen	Oracle Linux Engineering



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux