On 09/18/2020 06:45 AM, Suganath Prabu Subramani wrote:
> Hi Adam,
>
> Provide complete driver log with driver logging_level=0x83f8. From the
> log snippet, I could see the controller reset and it may be due to
> ioctl timeout also?.
certainly seen "cmd timeout" depending on the kernel version.
> Complete driver log will help to have a better understanding.
>
> Thanks,
> Suganath
>
[ 0.000000] Linux version 5.4.0-0.bpo.4-amd64
(debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 8.3.0 (Debian 8.3.0-6)) #1
SMP Debian 5.4.19-1~bpo10+1 (2020-03-09)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-0.bpo.4-amd64
root=UUID=3def0939-f671-431e-9aa4-d6e51dc9afa2 ro
mpt3sas.logging_level=0x83f8
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832
bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a212fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a213000-0x00000000ca43dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca43e000-0x00000000ca792fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca793000-0x00000000ca8e6fff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ca8e7000-0x00000000cafa3fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafa4000-0x00000000cbb63fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbb64000-0x00000000cbbfefff]
type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd300000-0x00000000fd4fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000102f37ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000102f380000-0x000000102fffffff]
reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI=0xca8e6000 ACPI 2.0=0xca8e6014
SMBIOS=0xcba0d000 SMBIOS 3.0=0xcba0c000 MEMATTR=0xc5f5e018
ESRT=0xc885f218
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME
X570-PRO, BIOS 2606 08/13/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3892.736 MHz processor
[ 0.000963] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000964] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000968] last_pfn = 0x102f380 max_arch_pfn = 0x400000000
[ 0.000971] MTRR default type: uncachable
[ 0.000971] MTRR fixed ranges enabled:
[ 0.000971] 00000-9FFFF write-back
[ 0.000972] A0000-BFFFF write-through
[ 0.000972] C0000-FFFFF write-protect
[ 0.000973] MTRR variable ranges enabled:
[ 0.000973] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000974] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000974] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000975] 3 base 0000CB320000 mask FFFFFFFF0000 uncachable
[ 0.000975] 4 disabled
[ 0.000975] 5 disabled
[ 0.000975] 6 disabled
[ 0.000976] 7 disabled
[ 0.000976] TOM2: 0000001030000000 aka 66304M
[ 0.001753] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC-
WT
[ 0.001909] e820: update [mem 0xcb320000-0xcb32ffff] usable ==> reserved
[ 0.001911] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.001913] last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[ 0.004742] esrt: Reserving ESRT space from 0x00000000c885f218 to
0x00000000c885f250.
[ 0.004747] e820: update [mem 0xc885f000-0xc885ffff] usable ==> reserved
[ 0.004758] Using GB pages for direct mapping
[ 0.004760] BRK [0xc54801000, 0xc54801fff] PGTABLE
[ 0.004761] BRK [0xc54802000, 0xc54802fff] PGTABLE
[ 0.004762] BRK [0xc54803000, 0xc54803fff] PGTABLE
[ 0.004773] BRK [0xc54804000, 0xc54804fff] PGTABLE
[ 0.004773] BRK [0xc54805000, 0xc54805fff] PGTABLE
[ 0.004774] BRK [0xc54806000, 0xc54806fff] PGTABLE
[ 0.004888] BRK [0xc54807000, 0xc54807fff] PGTABLE
[ 0.004902] BRK [0xc54808000, 0xc54808fff] PGTABLE
[ 0.004916] BRK [0xc54809000, 0xc54809fff] PGTABLE
[ 0.004940] BRK [0xc5480a000, 0xc5480afff] PGTABLE
[ 0.004985] BRK [0xc5480b000, 0xc5480bfff] PGTABLE
[ 0.005054] BRK [0xc5480c000, 0xc5480cfff] PGTABLE
[ 0.005095] RAMDISK: [mem 0x370a9000-0x3784bfff]
[ 0.005101] ACPI: Early table checksum verification disabled
[ 0.005104] ACPI: RSDP 0x00000000CA8E6014 000024 (v02 ALASKA)
[ 0.005106] ACPI: XSDT 0x00000000CA8E5728 0000BC (v01 ALASKA A M I
01072009 AMI 01000013)
[ 0.005110] ACPI: FACP 0x00000000CA8D6000 000114 (v06 ALASKA A M I
01072009 AMI 00010013)
[ 0.005113] ACPI: DSDT 0x00000000CA8C7000 00E2F5 (v02 ALASKA A M I
01072009 INTL 20120913)
[ 0.005115] ACPI: FACS 0x00000000CAF87000 000040
[ 0.005116] ACPI: SSDT 0x00000000CA8DC000 008C98 (v02 AMD AmdTable
00000002 MSFT 04000000)
[ 0.005118] ACPI: SSDT 0x00000000CA8D8000 003ACB (v01 AMD AMD AOD
00000001 INTL 20120913)
[ 0.005120] ACPI: SSDT 0x00000000CA8D7000 0000FC (v02 ALASKA CPUSSDT
01072009 AMI 01072009)
[ 0.005121] ACPI: FIDT 0x00000000CA8C6000 00009C (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.005123] ACPI: FPDT 0x00000000CA7D8000 000044 (v01 ALASKA A M I
01072009 AMI 01000013)
[ 0.005124] ACPI: MCFG 0x00000000CA8C4000 00003C (v01 ALASKA A M I
01072009 MSFT 00010013)
[ 0.005126] ACPI: HPET 0x00000000CA8C3000 000038 (v01 ALASKA A M I
01072009 AMI 00000005)
[ 0.005127] ACPI: SSDT 0x00000000CA8C2000 000024 (v01 AMD BIXBY
00001000 INTL 20120913)
[ 0.005129] ACPI: BGRT 0x00000000CA8C0000 000038 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.005130] ACPI: WPBT 0x00000000CA7E7000 00003C (v01 ALASKA A M I
00000001 ASUS 00000001)
[ 0.005132] ACPI: PCCT 0x00000000CA7E6000 00006E (v02 AMD AmdTable
00000001 AMD 00000000)
[ 0.005133] ACPI: SSDT 0x00000000CA7E2000 003EC9 (v02 AMD AmdTable
00000001 AMD 00000001)
[ 0.005135] ACPI: CRAT 0x00000000CA7E1000 000ED8 (v01 AMD AmdTable
00000001 AMD 00000001)
[ 0.005136] ACPI: CDIT 0x00000000CA7E0000 000029 (v01 AMD AmdTable
00000001 AMD 00000001)
[ 0.005138] ACPI: SSDT 0x00000000CA7DF000 00052C (v01 AMD QOGIRNOI
00000001 INTL 20120913)
[ 0.005139] ACPI: SSDT 0x00000000CA7DB000 003445 (v01 AMD QOGIRN
00000001 INTL 20120913)
[ 0.005141] ACPI: WSMT 0x00000000CA7DA000 000028 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.005142] ACPI: APIC 0x00000000CA7D9000 00015E (v03 ALASKA A M I
01072009 AMI 00010013)
[ 0.005147] ACPI: Local APIC address 0xfee00000
[ 0.005223] No NUMA configuration found
[ 0.005224] Faking a node at [mem 0x0000000000000000-0x000000102f37ffff]
[ 0.005226] NODE_DATA(0) allocated [mem 0x102f37b000-0x102f37ffff]
[ 0.005267] Zone ranges:
[ 0.005268] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.005269] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.005270] Normal [mem 0x0000000100000000-0x000000102f37ffff]
[ 0.005270] Device empty
[ 0.005271] Movable zone start for each node
[ 0.005271] Early memory node ranges
[ 0.005272] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.005273] node 0: [mem 0x0000000000100000-0x0000000009bfefff]
[ 0.005273] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.005274] node 0: [mem 0x000000000a213000-0x00000000ca43dfff]
[ 0.005274] node 0: [mem 0x00000000cbbff000-0x00000000ccffffff]
[ 0.005275] node 0: [mem 0x0000000100000000-0x000000102f37ffff]
[ 0.005377] Zeroed struct page in unavailable ranges: 22710 pages
[ 0.005378] Initmem setup node 0 [mem
0x0000000000001000-0x000000102f37ffff]
[ 0.005379] On node 0 totalpages: 16754506
[ 0.005380] DMA zone: 64 pages used for memmap
[ 0.005380] DMA zone: 50 pages reserved
[ 0.005381] DMA zone: 3999 pages, LIFO batch:0
[ 0.005412] DMA32 zone: 12945 pages used for memmap
[ 0.005413] DMA32 zone: 828459 pages, LIFO batch:63
[ 0.012604] Normal zone: 248782 pages used for memmap
[ 0.012606] Normal zone: 15922048 pages, LIFO batch:63
[ 0.134874] ACPI: PM-Timer IO Port: 0x808
[ 0.134877] ACPI: Local APIC address 0xfee00000
[ 0.134882] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.134894] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000,
GSI 0-23
[ 0.134899] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000,
GSI 24-55
[ 0.134900] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.134901] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.134902] ACPI: IRQ0 used by override.
[ 0.134903] ACPI: IRQ9 used by override.
[ 0.134904] Using ACPI (MADT) for SMP configuration information
[ 0.134905] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.134913] e820: update [mem 0xc5a27000-0xc5a6cfff] usable ==> reserved
[ 0.134920] smpboot: Allowing 32 CPUs, 16 hotplug CPUs
[ 0.134938] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.134939] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.134940] PM: Registered nosave memory: [mem 0x09bff000-0x09ffffff]
[ 0.134941] PM: Registered nosave memory: [mem 0x0a200000-0x0a212fff]
[ 0.134942] PM: Registered nosave memory: [mem 0xc5a27000-0xc5a6cfff]
[ 0.134943] PM: Registered nosave memory: [mem 0xc885f000-0xc885ffff]
[ 0.134944] PM: Registered nosave memory: [mem 0xca43e000-0xca792fff]
[ 0.134945] PM: Registered nosave memory: [mem 0xca793000-0xca8e6fff]
[ 0.134945] PM: Registered nosave memory: [mem 0xca8e7000-0xcafa3fff]
[ 0.134946] PM: Registered nosave memory: [mem 0xcafa4000-0xcbb63fff]
[ 0.134946] PM: Registered nosave memory: [mem 0xcbb64000-0xcbbfefff]
[ 0.134947] PM: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
[ 0.134948] PM: Registered nosave memory: [mem 0xd0000000-0xefffffff]
[ 0.134948] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.134948] PM: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[ 0.134949] PM: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[ 0.134949] PM: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[ 0.134950] PM: Registered nosave memory: [mem 0xfd300000-0xfd4fffff]
[ 0.134950] PM: Registered nosave memory: [mem 0xfd500000-0xfe9fffff]
[ 0.134951] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.134951] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.134951] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.134952] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.134952] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.134953] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.134953] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.134953] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.134954] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.134954] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.134955] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.134955] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.134955] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.134956] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.134956] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.134957] PM: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[ 0.134957] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.134959] [mem 0xd0000000-0xefffffff] available for PCI devices
[ 0.134960] Booting paravirtualized kernel on bare hardware
[ 0.134962] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.191478] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:32 nr_node_ids:1
[ 0.192368] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u262144
[ 0.192374] pcpu-alloc: s178584 r8192 d30312 u262144 alloc=1*2097152
[ 0.192374] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11
12 13 14 15
[ 0.192377] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27
28 29 30 31
[ 0.192398] Built 1 zonelists, mobility grouping on. Total pages:
16492665
[ 0.192398] Policy zone: Normal
[ 0.192399] Kernel command line:
BOOT_IMAGE=/vmlinuz-5.4.0-0.bpo.4-amd64
root=UUID=3def0939-f671-431e-9aa4-d6e51dc9afa2 ro
mpt3sas.logging_level=0x83f8
[ 0.192426] printk: log_buf_len individual max cpu contribution: 4096
bytes
[ 0.192427] printk: log_buf_len total cpu_extra contributions: 126976
bytes
[ 0.192427] printk: log_buf_len min size: 131072 bytes
[ 0.192451] printk: log_buf_len: 262144 bytes
[ 0.192452] printk: early log buf free: 116708(89%)
[ 0.197371] Dentry cache hash table entries: 8388608 (order: 14,
67108864 bytes, linear)
[ 0.199963] Inode-cache hash table entries: 4194304 (order: 13,
33554432 bytes, linear)
[ 0.200022] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.204895] Calgary: detecting Calgary via BIOS EBDA area
[ 0.204897] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.298570] Memory: 65697280K/67018024K available (10243K kernel
code, 1188K rwdata, 3752K rodata, 1664K init, 2064K bss, 1320744K
reserved, 0K cma-reserved)
[ 0.298734] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.298746] ftrace: allocating 33964 entries in 133 pages
[ 0.306293] rcu: Hierarchical RCU implementation.
[ 0.306294] rcu: RCU restricting CPUs from NR_CPUS=512 to
nr_cpu_ids=32.
[ 0.306295] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.306295] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.307868] NR_IRQS: 33024, nr_irqs: 1224, preallocated irqs: 16
[ 0.308152] random: crng done (trusting CPU's manufacturer)
[ 0.308173] Console: colour dummy device 80x25
[ 0.308300] printk: console [tty0] enabled
[ 0.308314] ACPI: Core revision 20190816
[ 0.308436] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484873504 ns
[ 0.308451] APIC: Switch to symmetric I/O mode setup
[ 0.308454] Switched APIC routing to physical flat.
[ 0.309052] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.328453] clocksource: tsc-early: mask: 0xffffffffffffffff
max_cycles: 0x7039182c1a4, max_idle_ns: 881590644438 ns
[ 0.328456] Calibrating delay loop (skipped), value calculated using
timer frequency.. 7785.47 BogoMIPS (lpj=15570944)
[ 0.328458] pid_max: default: 32768 minimum: 301
[ 0.330001] LSM: Security Framework initializing
[ 0.330005] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.330030] AppArmor: AppArmor initialized
[ 0.330031] TOMOYO Linux initialized
[ 0.330130] Mount-cache hash table entries: 131072 (order: 8, 1048576
bytes, linear)
[ 0.330212] Mountpoint-cache hash table entries: 131072 (order: 8,
1048576 bytes, linear)
[ 0.330386] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.330430] LVT offset 1 assigned for vector 0xf9
[ 0.330658] LVT offset 2 assigned for vector 0xf4
[ 0.330693] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.330694] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.330697] Spectre V1 : Mitigation: usercopy/swapgs barriers and
__user pointer sanitization
[ 0.330698] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.330699] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling
RSB on context switch
[ 0.330701] Spectre V2 : mitigation: Enabling conditional Indirect
Branch Prediction Barrier
[ 0.330703] Spectre V2 : User space: Mitigation: STIBP via seccomp
and prctl
[ 0.330704] Speculative Store Bypass: Mitigation: Speculative Store
Bypass disabled via prctl and seccomp
[ 0.330838] Freeing SMP alternatives memory: 24K
[ 0.444261] smpboot: CPU0: AMD Ryzen 7 3800XT 8-Core Processor
(family: 0x17, model: 0x71, stepping: 0x0)
[ 0.444332] Performance Events: Fam17h core perfctr, AMD PMU driver.
[ 0.444335] ... version: 0
[ 0.444336] ... bit width: 48
[ 0.444337] ... generic registers: 6
[ 0.444337] ... value mask: 0000ffffffffffff
[ 0.444338] ... max period: 00007fffffffffff
[ 0.444339] ... fixed-purpose events: 0
[ 0.444340] ... event mask: 000000000000003f
[ 0.444358] rcu: Hierarchical SRCU implementation.
[ 0.444454] NMI watchdog: Enabled. Permanently consumes one hw-PMU
counter.
[ 0.444454] smp: Bringing up secondary CPUs ...
[ 0.444454] x86: Booting SMP configuration:
[ 0.444454] .... node #0, CPUs: #1
[ 0.004410] do_IRQ: 1.55 No irq handler for vector
[ 0.444454] #2
[ 0.004410] do_IRQ: 2.55 No irq handler for vector
[ 0.444498] #3
[ 0.004410] do_IRQ: 3.55 No irq handler for vector
[ 0.446607] #4
[ 0.004410] do_IRQ: 4.55 No irq handler for vector
[ 0.448500] #5
[ 0.004410] do_IRQ: 5.55 No irq handler for vector
[ 0.452498] #6
[ 0.004410] do_IRQ: 6.55 No irq handler for vector
[ 0.454643] #7
[ 0.004410] do_IRQ: 7.55 No irq handler for vector
[ 0.456496] #8
[ 0.004410] do_IRQ: 8.55 No irq handler for vector
[ 0.458649] #9
[ 0.004410] do_IRQ: 9.55 No irq handler for vector
[ 0.460500] #10
[ 0.004410] do_IRQ: 10.55 No irq handler for vector
[ 0.462594] #11 #12 #13 #14 #15
[ 0.474639] smp: Brought up 1 node, 16 CPUs
[ 0.474639] smpboot: Max logical packages: 2
[ 0.474639] smpboot: Total of 16 processors activated (124567.55
BogoMIPS)
[ 0.476680] devtmpfs: initialized
[ 0.476680] x86/mm: Memory block size: 128MB
[ 0.481256] PM: Registering ACPI NVS region [mem
0x0a200000-0x0a212fff] (77824 bytes)
[ 0.481256] PM: Registering ACPI NVS region [mem
0xca8e7000-0xcafa3fff] (7065600 bytes)
[ 0.481256] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.481256] futex hash table entries: 8192 (order: 7, 524288 bytes,
linear)
[ 0.481256] pinctrl core: initialized pinctrl subsystem
[ 0.481256] NET: Registered protocol family 16
[ 0.481256] audit: initializing netlink subsys (disabled)
[ 0.481256] audit: type=2000 audit(1600450966.172:1):
state=initialized audit_enabled=0 res=1
[ 0.481256] cpuidle: using governor ladder
[ 0.481256] cpuidle: using governor menu
[ 0.481256] Detected 1 PCC Subspaces
[ 0.481256] Registering PCC driver as Mailbox controller
[ 0.481256] ACPI: bus type PCI registered
[ 0.481256] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.481256] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem
0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.481256] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.481256] PCI: Using configuration type 1 for base access
[ 0.484605] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.484605] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.556478] ACPI: Added _OSI(Module Device)
[ 0.556480] ACPI: Added _OSI(Processor Device)
[ 0.556481] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.556482] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.556483] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.556484] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.556485] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.562483] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.563226] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.564497] ACPI: EC: EC started
[ 0.564498] ACPI: EC: interrupt blocked
[ 0.564534] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.564536] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66,
EC_DATA=0x62
[ 0.564537] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle
transactions
[ 0.564538] ACPI: Interpreter enabled
[ 0.564548] ACPI: (supports S0 S3 S4 S5)
[ 0.564549] ACPI: Using IOAPIC for interrupt routing
[ 0.564741] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.564893] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.568090] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.568090] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI HPX-Type3]
[ 0.568090] acpi PNP0A08:00: _OSC: platform does not support
[PCIeHotplug SHPCHotplug PME LTR]
[ 0.568090] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.568090] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain
0000 [bus 00-7f] only partially covers this bridge
[ 0.568090] PCI host bridge to bus 0000:00
[ 0.568090] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.568090] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.568090] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.568090] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.568090] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.568090] pci_bus 0000:00: root bus resource [mem
0x000c0000-0x000dffff window]
[ 0.568090] pci_bus 0000:00: root bus resource [mem
0xd0000000-0xfec02fff window]
[ 0.568090] pci_bus 0000:00: root bus resource [mem
0xfee00000-0xffffffff window]
[ 0.568090] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.568090] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[ 0.568090] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[ 0.568090] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
[ 0.568090] pci 0000:00:01.2: enabling Extended Tags
[ 0.568090] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.568090] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[ 0.568090] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[ 0.568090] pci 0000:00:03.2: [1022:1483] type 01 class 0x060400
[ 0.568090] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 0.568090] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[ 0.568090] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[ 0.568090] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[ 0.568090] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[ 0.568090] pci 0000:00:07.1: enabling Extended Tags
[ 0.568090] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.568090] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[ 0.568090] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[ 0.568090] pci 0000:00:08.1: enabling Extended Tags
[ 0.568090] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.568090] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.568090] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.568090] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[ 0.568090] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[ 0.568090] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[ 0.568090] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[ 0.568090] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[ 0.568090] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[ 0.568090] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[ 0.568090] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[ 0.568090] pci 0000:01:00.0: [1022:57ad] type 01 class 0x060400
[ 0.568090] pci 0000:01:00.0: enabling Extended Tags
[ 0.568090] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.568090] pci 0000:01:00.0: 63.012 Gb/s available PCIe bandwidth,
limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with
16 GT/s x8 link)
[ 0.568090] pci 0000:00:01.2: PCI bridge to [bus 01-08]
[ 0.568090] pci 0000:00:01.2: bridge window [io 0xd000-0xefff]
[ 0.568090] pci 0000:00:01.2: bridge window [mem 0xfbf00000-0xfcafffff]
[ 0.568090] pci 0000:00:01.2: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.568461] pci 0000:02:02.0: [1022:57a3] type 01 class 0x060400
[ 0.568568] pci 0000:02:02.0: enabling Extended Tags
[ 0.568790] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.569009] pci 0000:02:05.0: [1022:57a3] type 01 class 0x060400
[ 0.569116] pci 0000:02:05.0: enabling Extended Tags
[ 0.569337] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
[ 0.569557] pci 0000:02:06.0: [1022:57a3] type 01 class 0x060400
[ 0.569663] pci 0000:02:06.0: enabling Extended Tags
[ 0.569884] pci 0000:02:06.0: PME# supported from D0 D3hot D3cold
[ 0.570093] pci 0000:02:08.0: [1022:57a4] type 01 class 0x060400
[ 0.570185] pci 0000:02:08.0: enabling Extended Tags
[ 0.570339] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
[ 0.570490] pci 0000:02:09.0: [1022:57a4] type 01 class 0x060400
[ 0.570582] pci 0000:02:09.0: enabling Extended Tags
[ 0.570736] pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
[ 0.570878] pci 0000:02:0a.0: [1022:57a4] type 01 class 0x060400
[ 0.570970] pci 0000:02:0a.0: enabling Extended Tags
[ 0.571124] pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
[ 0.571290] pci 0000:01:00.0: PCI bridge to [bus 02-08]
[ 0.571297] pci 0000:01:00.0: bridge window [io 0xd000-0xefff]
[ 0.571300] pci 0000:01:00.0: bridge window [mem 0xfbf00000-0xfcafffff]
[ 0.571307] pci 0000:01:00.0: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.571398] pci 0000:03:00.0: [1657:0014] type 00 class 0x0c0400
[ 0.571436] pci 0000:03:00.0: reg 0x10: [mem 0xfc3c0000-0xfc3fffff 64bit]
[ 0.571454] pci 0000:03:00.0: reg 0x18: [mem 0xfc40c000-0xfc40ffff 64bit]
[ 0.571487] pci 0000:03:00.0: reg 0x30: [mem 0xfc200000-0xfc2fffff pref]
[ 0.571578] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.571639] pci 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth,
limited by 5 GT/s x4 link at 0000:02:02.0 (capable of 32.000 Gb/s with 5
GT/s x8 link)
[ 0.571687] pci 0000:03:00.1: [1657:0014] type 00 class 0x0c0400
[ 0.571723] pci 0000:03:00.1: reg 0x10: [mem 0xfc380000-0xfc3bffff 64bit]
[ 0.571741] pci 0000:03:00.1: reg 0x18: [mem 0xfc408000-0xfc40bfff 64bit]
[ 0.571775] pci 0000:03:00.1: reg 0x30: [mem 0xfc100000-0xfc1fffff pref]
[ 0.571858] pci 0000:03:00.1: PME# supported from D0 D3hot
[ 0.571933] pci 0000:03:00.2: [1657:0014] type 00 class 0x020000
[ 0.571969] pci 0000:03:00.2: reg 0x10: [mem 0xfc340000-0xfc37ffff 64bit]
[ 0.571987] pci 0000:03:00.2: reg 0x18: [mem 0xfc404000-0xfc407fff 64bit]
[ 0.572020] pci 0000:03:00.2: reg 0x30: [mem 0xfc000000-0xfc0fffff pref]
[ 0.572102] pci 0000:03:00.2: PME# supported from D0 D3hot
[ 0.572177] pci 0000:03:00.3: [1657:0014] type 00 class 0x020000
[ 0.572213] pci 0000:03:00.3: reg 0x10: [mem 0xfc300000-0xfc33ffff 64bit]
[ 0.572231] pci 0000:03:00.3: reg 0x18: [mem 0xfc400000-0xfc403fff 64bit]
[ 0.572265] pci 0000:03:00.3: reg 0x30: [mem 0xfbf00000-0xfbffffff pref]
[ 0.572346] pci 0000:03:00.3: PME# supported from D0 D3hot
[ 0.572521] pci 0000:02:02.0: PCI bridge to [bus 03]
[ 0.572530] pci 0000:02:02.0: bridge window [mem 0xfbf00000-0xfc4fffff]
[ 0.572638] pci 0000:04:00.0: [8086:1539] type 00 class 0x020000
[ 0.572682] pci 0000:04:00.0: reg 0x10: [mem 0xfca00000-0xfca1ffff]
[ 0.572716] pci 0000:04:00.0: reg 0x18: [io 0xe000-0xe01f]
[ 0.572733] pci 0000:04:00.0: reg 0x1c: [mem 0xfca20000-0xfca23fff]
[ 0.572908] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.573088] pci 0000:02:05.0: PCI bridge to [bus 04]
[ 0.573094] pci 0000:02:05.0: bridge window [io 0xe000-0xefff]
[ 0.573098] pci 0000:02:05.0: bridge window [mem 0xfca00000-0xfcafffff]
[ 0.573198] pci 0000:05:00.0: [1002:7143] type 00 class 0x030000
[ 0.573240] pci 0000:05:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.573264] pci 0000:05:00.0: reg 0x18: [mem 0xfc930000-0xfc93ffff 64bit]
[ 0.573279] pci 0000:05:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.573308] pci 0000:05:00.0: reg 0x30: [mem 0xfc900000-0xfc91ffff pref]
[ 0.573320] pci 0000:05:00.0: enabling Extended Tags
[ 0.573332] pci 0000:05:00.0: BAR 0: assigned to efifb
[ 0.573399] pci 0000:05:00.0: supports D1 D2
[ 0.573440] pci 0000:05:00.0: 2.000 Gb/s available PCIe bandwidth,
limited by 2.5 GT/s x1 link at 0000:02:06.0 (capable of 32.000 Gb/s with
2.5 GT/s x16 link)
[ 0.573488] pci 0000:05:00.1: [1002:7163] type 00 class 0x038000
[ 0.573524] pci 0000:05:00.1: reg 0x10: [mem 0xfc920000-0xfc92ffff 64bit]
[ 0.573642] pci 0000:05:00.1: supports D1 D2
[ 0.573696] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
[ 0.573710] pci 0000:02:06.0: PCI bridge to [bus 05]
[ 0.573716] pci 0000:02:06.0: bridge window [io 0xd000-0xdfff]
[ 0.573720] pci 0000:02:06.0: bridge window [mem 0xfc900000-0xfc9fffff]
[ 0.573727] pci 0000:02:06.0: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.573832] pci 0000:06:00.0: [1022:1485] type 00 class 0x130000
[ 0.573913] pci 0000:06:00.0: enabling Extended Tags
[ 0.574047] pci 0000:06:00.0: 63.012 Gb/s available PCIe bandwidth,
limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with
16 GT/s x16 link)
[ 0.574178] pci 0000:06:00.1: [1022:149c] type 00 class 0x0c0330
[ 0.574573] pci 0000:06:00.1: reg 0x10: [mem 0xfc600000-0xfc6fffff 64bit]
[ 0.575310] pci 0000:06:00.1: enabling Extended Tags
[ 0.575941] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
[ 0.576218] pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.576252] pci 0000:06:00.3: reg 0x10: [mem 0xfc500000-0xfc5fffff 64bit]
[ 0.576311] pci 0000:06:00.3: enabling Extended Tags
[ 0.576385] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[ 0.576527] pci 0000:02:08.0: PCI bridge to [bus 06]
[ 0.576536] pci 0000:02:08.0: bridge window [mem 0xfc500000-0xfc6fffff]
[ 0.576628] pci 0000:07:00.0: [1022:7901] type 00 class 0x010601
[ 0.576712] pci 0000:07:00.0: reg 0x24: [mem 0xfc800000-0xfc8007ff]
[ 0.576732] pci 0000:07:00.0: enabling Extended Tags
[ 0.576824] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 0.576886] pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth,
limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with
16 GT/s x16 link)
[ 0.576958] pci 0000:02:09.0: PCI bridge to [bus 07]
[ 0.576967] pci 0000:02:09.0: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.577059] pci 0000:08:00.0: [1022:7901] type 00 class 0x010601
[ 0.577143] pci 0000:08:00.0: reg 0x24: [mem 0xfc700000-0xfc7007ff]
[ 0.577162] pci 0000:08:00.0: enabling Extended Tags
[ 0.577254] pci 0000:08:00.0: PME# supported from D3hot D3cold
[ 0.577315] pci 0000:08:00.0: 63.012 Gb/s available PCIe bandwidth,
limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with
16 GT/s x16 link)
[ 0.577387] pci 0000:02:0a.0: PCI bridge to [bus 08]
[ 0.577395] pci 0000:02:0a.0: bridge window [mem 0xfc700000-0xfc7fffff]
[ 0.577477] pci 0000:09:00.0: [1000:00af] type 00 class 0x010700
[ 0.577506] pci 0000:09:00.0: reg 0x10: [mem 0xe0100000-0xe01fffff
64bit pref]
[ 0.577518] pci 0000:09:00.0: reg 0x18: [mem 0xe0000000-0xe00fffff
64bit pref]
[ 0.577526] pci 0000:09:00.0: reg 0x20: [mem 0xfcf00000-0xfcffffff]
[ 0.577535] pci 0000:09:00.0: reg 0x24: [io 0xf000-0xf0ff]
[ 0.577543] pci 0000:09:00.0: reg 0x30: [mem 0xfce00000-0xfcefffff pref]
[ 0.577606] pci 0000:09:00.0: supports D1 D2
[ 0.577687] pci 0000:00:03.2: PCI bridge to [bus 09]
[ 0.577691] pci 0000:00:03.2: bridge window [io 0xf000-0xffff]
[ 0.577693] pci 0000:00:03.2: bridge window [mem 0xfce00000-0xfcffffff]
[ 0.577697] pci 0000:00:03.2: bridge window [mem
0xe0000000-0xe01fffff 64bit pref]
[ 0.577727] pci 0000:0a:00.0: [1022:148a] type 00 class 0x130000
[ 0.577761] pci 0000:0a:00.0: enabling Extended Tags
[ 0.577856] pci 0000:00:07.1: PCI bridge to [bus 0a]
[ 0.577899] pci 0000:0b:00.0: [1022:1485] type 00 class 0x130000
[ 0.577939] pci 0000:0b:00.0: enabling Extended Tags
[ 0.578026] pci 0000:0b:00.1: [1022:1486] type 00 class 0x108000
[ 0.578048] pci 0000:0b:00.1: reg 0x18: [mem 0xfcc00000-0xfccfffff]
[ 0.578059] pci 0000:0b:00.1: reg 0x24: [mem 0xfcd00000-0xfcd01fff]
[ 0.578068] pci 0000:0b:00.1: enabling Extended Tags
[ 0.578149] pci 0000:0b:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.578168] pci 0000:0b:00.3: reg 0x10: [mem 0xfcb00000-0xfcbfffff 64bit]
[ 0.578198] pci 0000:0b:00.3: enabling Extended Tags
[ 0.578241] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[ 0.578311] pci 0000:00:08.1: PCI bridge to [bus 0b]
[ 0.578316] pci 0000:00:08.1: bridge window [mem 0xfcb00000-0xfcdfffff]
[ 0.578547] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.578574] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.578597] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.578626] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.578651] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.578673] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.578694] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.578715] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.580456] ACPI: EC: interrupt unblocked
[ 0.580456] ACPI: EC: event unblocked
[ 0.580456] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66,
EC_DATA=0x62
[ 0.580456] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle
transactions and events
[ 0.580456] iommu: Default domain type: Translated
[ 0.580466] pci 0000:05:00.0: vgaarb: setting as boot VGA device
[ 0.580466] pci 0000:05:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.580468] pci 0000:05:00.0: vgaarb: bridge control possible
[ 0.580469] vgaarb: loaded
[ 0.580516] EDAC MC: Ver: 3.0.0
[ 0.580646] Registered efivars operations
[ 0.580646] PCI: Using ACPI for IRQ routing
[ 0.583184] PCI: pci_cache_line_size set to 64 bytes
[ 0.583296] e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
[ 0.583296] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.583297] e820: reserve RAM buffer [mem 0xc5a27000-0xc7ffffff]
[ 0.583297] e820: reserve RAM buffer [mem 0xc885f000-0xcbffffff]
[ 0.583298] e820: reserve RAM buffer [mem 0xca43e000-0xcbffffff]
[ 0.583298] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[ 0.583298] e820: reserve RAM buffer [mem 0x102f380000-0x102fffffff]
[ 0.584460] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.584460] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.588484] clocksource: Switched to clocksource tsc-early
[ 0.594191] VFS: Disk quotas dquot_6.6.0
[ 0.594205] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.594284] AppArmor: AppArmor Filesystem Enabled
[ 0.594290] pnp: PnP ACPI init
[ 0.594339] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.594342] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.594360] system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 0.594362] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.594399] system 00:02: [mem 0xfd100000-0xfd1fffff] has been reserved
[ 0.594401] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.594420] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.594489] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.594491] system 00:04: [io 0x0200-0x021f] has been reserved
[ 0.594493] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.594621] pnp 00:05: [dma 0 disabled]
[ 0.594639] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.594771] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.594772] system 00:06: [io 0x040b] has been reserved
[ 0.594773] system 00:06: [io 0x04d6] has been reserved
[ 0.594775] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.594776] system 00:06: [io 0x0c14] has been reserved
[ 0.594777] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.594778] system 00:06: [io 0x0c52] has been reserved
[ 0.594780] system 00:06: [io 0x0c6c] has been reserved
[ 0.594781] system 00:06: [io 0x0c6f] has been reserved
[ 0.594782] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.594783] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.594785] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.594786] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.594787] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.594788] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.594790] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.594791] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.594792] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.594793] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.594795] system 00:06: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 0.594796] system 00:06: [mem 0xfec01000-0xfec01fff] could not be
reserved
[ 0.594798] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.594799] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.594801] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be
reserved
[ 0.594802] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.594803] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.594806] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.595046] pnp: PnP ACPI: found 7 devices
[ 0.595682] thermal_sys: Registered thermal governor 'fair_share'
[ 0.595682] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.595683] thermal_sys: Registered thermal governor 'step_wise'
[ 0.595684] thermal_sys: Registered thermal governor 'user_space'
[ 0.600189] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.600213] pci 0000:02:02.0: PCI bridge to [bus 03]
[ 0.600219] pci 0000:02:02.0: bridge window [mem 0xfbf00000-0xfc4fffff]
[ 0.600229] pci 0000:02:05.0: PCI bridge to [bus 04]
[ 0.600231] pci 0000:02:05.0: bridge window [io 0xe000-0xefff]
[ 0.600236] pci 0000:02:05.0: bridge window [mem 0xfca00000-0xfcafffff]
[ 0.600246] pci 0000:02:06.0: PCI bridge to [bus 05]
[ 0.600248] pci 0000:02:06.0: bridge window [io 0xd000-0xdfff]
[ 0.600254] pci 0000:02:06.0: bridge window [mem 0xfc900000-0xfc9fffff]
[ 0.600258] pci 0000:02:06.0: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.600265] pci 0000:02:08.0: PCI bridge to [bus 06]
[ 0.600270] pci 0000:02:08.0: bridge window [mem 0xfc500000-0xfc6fffff]
[ 0.600279] pci 0000:02:09.0: PCI bridge to [bus 07]
[ 0.600284] pci 0000:02:09.0: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.600293] pci 0000:02:0a.0: PCI bridge to [bus 08]
[ 0.600299] pci 0000:02:0a.0: bridge window [mem 0xfc700000-0xfc7fffff]
[ 0.600308] pci 0000:01:00.0: PCI bridge to [bus 02-08]
[ 0.600310] pci 0000:01:00.0: bridge window [io 0xd000-0xefff]
[ 0.600315] pci 0000:01:00.0: bridge window [mem 0xfbf00000-0xfcafffff]
[ 0.600319] pci 0000:01:00.0: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.600326] pci 0000:00:01.2: PCI bridge to [bus 01-08]
[ 0.600328] pci 0000:00:01.2: bridge window [io 0xd000-0xefff]
[ 0.600331] pci 0000:00:01.2: bridge window [mem 0xfbf00000-0xfcafffff]
[ 0.600333] pci 0000:00:01.2: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.600337] pci 0000:00:03.2: PCI bridge to [bus 09]
[ 0.600339] pci 0000:00:03.2: bridge window [io 0xf000-0xffff]
[ 0.600341] pci 0000:00:03.2: bridge window [mem 0xfce00000-0xfcffffff]
[ 0.600344] pci 0000:00:03.2: bridge window [mem
0xe0000000-0xe01fffff 64bit pref]
[ 0.600348] pci 0000:00:07.1: PCI bridge to [bus 0a]
[ 0.600354] pci 0000:00:08.1: PCI bridge to [bus 0b]
[ 0.600357] pci 0000:00:08.1: bridge window [mem 0xfcb00000-0xfcdfffff]
[ 0.600362] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.600363] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.600364] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.600365] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.600367] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff
window]
[ 0.600368] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff
window]
[ 0.600369] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xfec02fff
window]
[ 0.600371] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff
window]
[ 0.600372] pci_bus 0000:01: resource 0 [io 0xd000-0xefff]
[ 0.600373] pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfcafffff]
[ 0.600374] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.600376] pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
[ 0.600377] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfcafffff]
[ 0.600378] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.600380] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfc4fffff]
[ 0.600381] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.600382] pci_bus 0000:04: resource 1 [mem 0xfca00000-0xfcafffff]
[ 0.600383] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.600384] pci_bus 0000:05: resource 1 [mem 0xfc900000-0xfc9fffff]
[ 0.600386] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.600387] pci_bus 0000:06: resource 1 [mem 0xfc500000-0xfc6fffff]
[ 0.600388] pci_bus 0000:07: resource 1 [mem 0xfc800000-0xfc8fffff]
[ 0.600390] pci_bus 0000:08: resource 1 [mem 0xfc700000-0xfc7fffff]
[ 0.600391] pci_bus 0000:09: resource 0 [io 0xf000-0xffff]
[ 0.600392] pci_bus 0000:09: resource 1 [mem 0xfce00000-0xfcffffff]
[ 0.600393] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe01fffff
64bit pref]
[ 0.600395] pci_bus 0000:0b: resource 1 [mem 0xfcb00000-0xfcdfffff]
[ 0.600446] NET: Registered protocol family 2
[ 0.600531] tcp_listen_portaddr_hash hash table entries: 32768
(order: 7, 524288 bytes, linear)
[ 0.600576] TCP established hash table entries: 524288 (order: 10,
4194304 bytes, linear)
[ 0.600963] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes, linear)
[ 0.601044] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.601076] UDP hash table entries: 32768 (order: 8, 1048576 bytes,
linear)
[ 0.601162] UDP-Lite hash table entries: 32768 (order: 8, 1048576
bytes, linear)
[ 0.601294] NET: Registered protocol family 1
[ 0.601297] NET: Registered protocol family 44
[ 0.601354] pci 0000:05:00.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.744420] pci 0000:0b:00.3: quirk_usb_early_handoff+0x0/0x644 took
139437 usecs
[ 0.744422] PCI: CLS 64 bytes, default 64
[ 0.744444] Trying to unpack rootfs image as initramfs...
[ 0.811479] Freeing initrd memory: 7820K
[ 0.811485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.811486] software IO TLB: mapped [mem 0xbd943000-0xc1943000] (64MB)
[ 0.811514] amd_uncore: AMD NB counters detected
[ 0.811536] amd_uncore: AMD LLC counters detected
[ 0.811688] LVT offset 0 assigned for vector 0x400
[ 0.811760] perf: AMD IBS detected (0x000003ff)
[ 0.812110] Initialise system trusted keyrings
[ 0.812119] Key type blacklist registered
[ 0.812149] workingset: timestamp_bits=40 max_order=24 bucket_order=0
[ 0.812816] zbud: loaded
[ 0.812955] Platform Keyring initialized
[ 0.812956] Key type asymmetric registered
[ 0.812957] Asymmetric key parser 'x509' registered
[ 0.812962] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[ 0.812998] io scheduler mq-deadline registered
[ 0.813573] pcieport 0000:00:01.2: AER: enabled with IRQ 26
[ 0.813672] pcieport 0000:00:03.2: AER: enabled with IRQ 27
[ 0.813811] pcieport 0000:00:07.1: AER: enabled with IRQ 29
[ 0.813897] pcieport 0000:00:08.1: AER: enabled with IRQ 30
[ 0.815168] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.815175] efifb: probing for efifb
[ 0.815186] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
[ 0.815188] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.815189] efifb: scrolling: redraw
[ 0.815190] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.831789] Console: switching to colour frame buffer device 128x48
[ 0.848655] fb0: EFI VGA frame buffer device
[ 0.848842] Monitor-Mwait will be used to enter C-1 state
[ 0.849945] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.870569] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 0.870890] Linux agpgart interface v0.103
[ 0.871248] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
[ 0.871354] AMD-Vi: AMD IOMMUv2 functionality not available on this
system
[ 0.872089] i8042: PNP: No PS/2 controller found.
[ 0.872159] mousedev: PS/2 mouse device common for all mice
[ 0.872326] rtc_cmos 00:03: RTC can wake from S4
[ 0.872568] rtc_cmos 00:03: registered as rtc0
[ 0.872610] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes
nvram, hpet irqs
[ 0.872943] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.873187] drop_monitor: Initializing network drop monitor service
[ 0.873376] NET: Registered protocol family 10
[ 0.877537] Segment Routing with IPv6
[ 0.877554] mip6: Mobile IPv6
[ 0.877643] NET: Registered protocol family 17
[ 0.877796] mpls_gso: MPLS GSO support
[ 0.878469] microcode: CPU0: patch_level=0x08701021
[ 0.878516] microcode: CPU1: patch_level=0x08701021
[ 0.878673] microcode: CPU2: patch_level=0x08701021
[ 0.878826] microcode: CPU3: patch_level=0x08701021
[ 0.878981] microcode: CPU4: patch_level=0x08701021
[ 0.884795] microcode: CPU5: patch_level=0x08701021
[ 0.890562] microcode: CPU6: patch_level=0x08701021
[ 0.896234] microcode: CPU7: patch_level=0x08701021
[ 0.901809] microcode: CPU8: patch_level=0x08701021
[ 0.907302] microcode: CPU9: patch_level=0x08701021
[ 0.912716] microcode: CPU10: patch_level=0x08701021
[ 0.918070] microcode: CPU11: patch_level=0x08701021
[ 0.923283] microcode: CPU12: patch_level=0x08701021
[ 0.928428] microcode: CPU13: patch_level=0x08701021
[ 0.933514] microcode: CPU14: patch_level=0x08701021
[ 0.938511] microcode: CPU15: patch_level=0x08701021
[ 0.943343] microcode: Microcode Update Driver: v2.2.
[ 0.943346] IPI shorthand broadcast: enabled
[ 0.952798] sched_clock: Marking stable (952383032,
410817)->(1064737271, -111943422)
[ 0.957776] registered taskstats version 1
[ 0.962648] Loading compiled-in X.509 certificates
[ 0.984792] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.990108] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 0.995418] zswap: loaded using pool lzo/zbud
[ 1.000755] Key type ._fscrypt registered
[ 1.005859] Key type .fscrypt registered
[ 1.011003] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.016251] integrity: Loading X.509 certificate: UEFI:db
[ 1.021504] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key
Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 1.026859] integrity: Loading X.509 certificate: UEFI:db
[ 1.032338] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key
Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 1.037860] integrity: Loading X.509 certificate: UEFI:db
[ 1.043391] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI
CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.049145] integrity: Loading X.509 certificate: UEFI:db
[ 1.054827] integrity: Loaded X.509 cert 'Microsoft Windows
Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.060799] integrity: Loading X.509 certificate: UEFI:db
[ 1.066797] integrity: Loaded X.509 cert 'Canonical Ltd. Master
Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.079529] rtc_cmos 00:03: setting system clock to
2020-09-18T17:42:47 UTC (1600450967)
[ 1.086508] Freeing unused kernel image memory: 1664K
[ 1.099508] Write protecting the kernel read-only data: 16384k
[ 1.106185] Freeing unused kernel image memory: 2036K
[ 1.112542] Freeing unused kernel image memory: 344K
[ 1.123508] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.129763] Run /init as init process
[ 1.196584] SCSI subsystem initialized
[ 1.203017] ACPI: bus type USB registered
[ 1.209367] usbcore: registered new interface driver usbfs
[ 1.215895] usbcore: registered new interface driver hub
[ 1.222504] usbcore: registered new device driver usb
[ 1.226425] libata version 3.00 loaded.
[ 1.231351] ahci 0000:07:00.0: version 3.0
[ 1.231506] ahci 0000:07:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps
0x1 impl SATA mode
[ 1.238305] ahci 0000:07:00.0: flags: 64bit ncq sntf ilck pm led clo
only pmp fbs pio slum part
[ 1.245658] scsi host0: ahci
[ 1.252721] ata1: SATA max UDMA/133 abar m2048@0xfc800000 port
0xfc800100 irq 39
[ 1.260287] ahci 0000:08:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps
0x10 impl SATA mode
[ 1.260820] xhci_hcd 0000:06:00.1: xHCI Host Controller
[ 1.267793] ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo
only pmp fbs pio slum part
[ 1.275416] xhci_hcd 0000:06:00.1: new USB bus registered, assigned
bus number 1
[ 1.289221] scsi host1: ahci
[ 1.298695] xhci_hcd 0000:06:00.1: hcc params 0x0278ffe5 hci version
0x110 quirks 0x0000000000000410
[ 1.302009] scsi host2: ahci
[ 1.315252] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.04
[ 1.319394] scsi host3: ahci
[ 1.325450] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.337072] scsi host4: ahci
[ 1.343118] usb usb1: Product: xHCI Host Controller
[ 1.353523] scsi host5: ahci
[ 1.360655] usb usb1: Manufacturer: Linux 5.4.0-0.bpo.4-amd64 xhci-hcd
[ 1.369344] ata2: DUMMY
[ 1.378055] usb usb1: SerialNumber: 0000:06:00.1
[ 1.386705] ata3: DUMMY
[ 1.386706] ata4: DUMMY
[ 1.395562] hub 1-0:1.0: USB hub found
[ 1.404121] ata5: DUMMY
[ 1.404208] ata6: SATA max UDMA/133 abar m2048@0xfc700000 port
0xfc700300 irq 40
[ 1.413439] hub 1-0:1.0: 6 ports detected
[ 1.446648] xhci_hcd 0000:06:00.1: xHCI Host Controller
[ 1.454766] xhci_hcd 0000:06:00.1: new USB bus registered, assigned
bus number 2
[ 1.462928] xhci_hcd 0000:06:00.1: Host supports USB 3.1 Enhanced
SuperSpeed
[ 1.471061] usb usb2: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 1.478582] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.479568] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0003, bcdDevice= 5.04
[ 1.494832] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.502563] usb usb2: Product: xHCI Host Controller
[ 1.510163] usb usb2: Manufacturer: Linux 5.4.0-0.bpo.4-amd64 xhci-hcd
[ 1.517738] usb usb2: SerialNumber: 0000:06:00.1
[ 1.525311] hub 2-0:1.0: USB hub found
[ 1.532796] hub 2-0:1.0: 4 ports detected
[ 1.540425] xhci_hcd 0000:06:00.3: xHCI Host Controller
[ 1.547813] xhci_hcd 0000:06:00.3: new USB bus registered, assigned
bus number 3
[ 1.555565] xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version
0x110 quirks 0x0000000000000410
[ 1.563405] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.04
[ 1.571120] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.578952] usb usb3: Product: xHCI Host Controller
[ 1.586786] usb usb3: Manufacturer: Linux 5.4.0-0.bpo.4-amd64 xhci-hcd
[ 1.594683] usb usb3: SerialNumber: 0000:06:00.3
[ 1.602673] hub 3-0:1.0: USB hub found
[ 1.610676] hub 3-0:1.0: 6 ports detected
[ 1.618666] xhci_hcd 0000:06:00.3: xHCI Host Controller
[ 1.626360] xhci_hcd 0000:06:00.3: new USB bus registered, assigned
bus number 4
[ 1.634142] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced
SuperSpeed
[ 1.642085] usb usb4: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 1.649746] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0003, bcdDevice= 5.04
[ 1.657499] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.665176] usb usb4: Product: xHCI Host Controller
[ 1.672722] usb usb4: Manufacturer: Linux 5.4.0-0.bpo.4-amd64 xhci-hcd
[ 1.680282] usb usb4: SerialNumber: 0000:06:00.3
[ 1.681473] tsc: Refined TSC clocksource calibration: 3892.629 MHz
[ 1.692423] hub 4-0:1.0: USB hub found
[ 1.695168] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x70385052568, max_idle_ns: 881591050251 ns
[ 1.703815] hub 4-0:1.0: 4 ports detected
[ 1.717089] clocksource: Switched to clocksource tsc
[ 1.724459] usb: port power management may be unreliable
[ 1.731950] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[ 1.739209] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned
bus number 5
[ 1.746688] xhci_hcd 0000:0b:00.3: hcc params 0x0278ffe5 hci version
0x110 quirks 0x0000000000000410
[ 1.754201] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.04
[ 1.761666] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.765728] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.769251] usb usb5: Product: xHCI Host Controller
[ 1.783495] ata6.00: ATA-11: SAMSUNG MZ7LH960HAJR-00005, HXT7404Q,
max UDMA/133
[ 1.784745] usb usb5: Manufacturer: Linux 5.4.0-0.bpo.4-amd64 xhci-hcd
[ 1.784746] usb usb5: SerialNumber: 0000:0b:00.3
[ 1.792691] ata6.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth
32), AA
[ 1.804055] hub 5-0:1.0: USB hub found
[ 1.814462] ata6.00: configured for UDMA/133
[ 1.816414] hub 5-0:1.0: 4 ports detected
[ 1.824461] scsi 5:0:0:0: Direct-Access ATA SAMSUNG MZ7LH960
404Q PQ: 0 ANSI: 5
[ 1.836236] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[ 1.855448] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned
bus number 6
[ 1.863218] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced
SuperSpeed
[ 1.870987] usb usb6: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 1.878790] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0003, bcdDevice= 5.04
[ 1.886682] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.886813] sd 5:0:0:0: [sda] 1875385008 512-byte logical blocks:
(960 GB/894 GiB)
[ 1.894601] usb usb6: Product: xHCI Host Controller
[ 1.894602] usb usb6: Manufacturer: Linux 5.4.0-0.bpo.4-amd64 xhci-hcd
[ 1.902671] sd 5:0:0:0: [sda] 4096-byte physical blocks
[ 1.910721] usb usb6: SerialNumber: 0000:0b:00.3
[ 1.910828] hub 6-0:1.0: USB hub found
[ 1.918838] sd 5:0:0:0: [sda] Write Protect is off
[ 1.926898] hub 6-0:1.0: 4 ports detected
[ 1.934802] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.952472] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[ 1.958197] sd 5:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.993395] sda: sda1 sda2 sda3 sda4 sda5
[ 2.001657] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.129989] usb 3-4: config 1 has an invalid interface number: 2 but
max is 1
[ 2.138112] usb 3-4: config 1 has no interface number 1
[ 2.156988] usb 3-4: New USB device found, idVendor=0b05,
idProduct=18f3, bcdDevice= 1.00
[ 2.165098] usb 3-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.172901] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[ 2.173240] usb 3-4: Product: AURA LED Controller
[ 2.189428] usb 3-4: Manufacturer: AsusTek Computer Inc.
[ 2.197462] usb 3-4: SerialNumber: 9876543210
[ 2.211860] usb 5-2: New USB device found, idVendor=05e3,
idProduct=0608, bcdDevice= 7.02
[ 2.219890] usb 5-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 2.227996] usb 5-2: Product: USB2.0 Hub
[ 2.236028] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.252027] usbcore: registered new interface driver usbhid
[ 2.259752] usbhid: USB HID core driver
[ 2.268154] hid-generic 0003:0B05:18F3.0001: hiddev0,hidraw0: USB HID
v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on
usb-0000:06:00.3-4/input2
[ 2.287381] hub 5-2:1.0: USB hub found
[ 2.295735] hub 5-2:1.0: 4 ports detected
[ 2.406610] SGI XFS with ACLs, security attributes, realtime, no
debug enabled
[ 2.415285] XFS (sda3): Mounting V5 Filesystem
[ 2.441398] XFS (sda3): Starting recovery (logdev: internal)
[ 2.453904] XFS (sda3): Ending recovery (logdev: internal)
[ 2.505724] Not activating Mandatory Access Control as
/sbin/tomoyo-init does not exist.
[ 2.561681] systemd[1]: Inserted module 'autofs4'
[ 2.585050] systemd[1]: systemd 241 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN
-PCRE2 default-hierarchy=hybrid)
[ 2.608473] usb 5-2.1: new low-speed USB device number 3 using xhci_hcd
[ 2.624483] systemd[1]: Detected architecture x86-64.
[ 2.686158] systemd[1]: Set hostname to <mercury>.
[ 2.744061] usb 5-2.1: New USB device found, idVendor=0b39,
idProduct=0d04, bcdDevice= 1.60
[ 2.752177] usb 5-2.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.760408] usb 5-2.1: Product: USB KVM Switch 4 PORT V2.7
[ 2.768637] usb 5-2.1: Manufacturer: USB KVM Switch 4 PORT V2.7
[ 2.874445] input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT
V2.7 as
/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-2/5-2.1/5-2.1:1.0/0003:0B39:0D04.0002/input/input0
[ 2.948519] hid-generic 0003:0B39:0D04.0002: input,hidraw1: USB HID
v1.10 Keyboard [USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7]
on usb-0000:0b:00.3-2.1/input0
[ 2.972221] input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT
V2.7 Mouse as
/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-2/5-2.1/5-2.1:1.1/0003:0B39:0D04.0003/input/input1
[ 2.990273] input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT
V2.7 System Control as
/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-2/5-2.1/5-2.1:1.1/0003:0B39:0D04.0003/input/input2
[ 3.068482] input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT
V2.7 Consumer Control as
/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-2/5-2.1/5-2.1:1.1/0003:0B39:0D04.0003/input/input3
[ 3.087990] input: USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT
V2.7 as
/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-2/5-2.1/5-2.1:1.1/0003:0B39:0D04.0003/input/input4
[ 3.108429] hid-generic 0003:0B39:0D04.0003: input,hidraw2: USB HID
v1.10 Mouse [USB KVM Switch 4 PORT V2.7 USB KVM Switch 4 PORT V2.7] on
usb-0000:0b:00.3-2.1/input1
[ 3.208463] usb 5-2.2: new low-speed USB device number 4 using xhci_hcd
[ 3.338082] usb 5-2.2: New USB device found, idVendor=046d,
idProduct=c31c, bcdDevice=64.00
[ 3.348677] usb 5-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.359371] usb 5-2.2: Product: USB Keyboard
[ 3.369834] usb 5-2.2: Manufacturer: Logitech
[ 3.484185] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-2/5-2.2/5-2.2:1.0/0003:046D:C31C.0004/input/input5
[ 3.564527] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID
v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:0b:00.3-2.2/input0
[ 3.596191] input: Logitech USB Keyboard Consumer Control as
/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-2/5-2.2/5-2.2:1.1/0003:046D:C31C.0005/input/input6
[ 3.676473] input: Logitech USB Keyboard System Control as
/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-2/5-2.2/5-2.2:1.1/0003:046D:C31C.0005/input/input7
[ 3.700014] hid-generic 0003:046D:C31C.0005: input,hidraw4: USB HID
v1.10 Device [Logitech USB Keyboard] on usb-0000:0b:00.3-2.2/input1
[ 3.752627] systemd[1]: Condition check resulted in Root Slice being
skipped.
[ 3.764823] systemd[1]: Condition check resulted in System Slice
being skipped.
[ 3.777616] systemd[1]: Listening on udev Control Socket.
[ 3.802058] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 3.806035] usb 5-2.3: new low-speed USB device number 5 using xhci_hcd
[ 3.839488] systemd[1]: Created slice system-postfix.slice.
[ 3.863506] systemd[1]: Listening on udev Kernel Socket.
[ 3.887444] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.938532] usb 5-2.3: New USB device found, idVendor=0430,
idProduct=0100, bcdDevice= 1.07
[ 3.938568] usb 5-2.3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.996539] input: HID 0430:0100 as
/devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-2/5-2.3/5-2.3:1.0/0003:0430:0100.0006/input/input8
[ 4.020270] hid-generic 0003:0430:0100.0006: input,hidraw5: USB HID
v1.10 Mouse [HID 0430:0100] on usb-0000:0b:00.3-2.3/input0
[ 4.285236] xfs filesystem being remounted at / supports timestamps
until 2038 (0x7fffffff)
[ 4.319560] nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
[ 4.327574] ACPI Warning: SystemIO range
0x0000000000000295-0x0000000000000296 conflicts with OpRegion
0x0000000000000290-0x0000000000000299 (\AMW0.SHWM) (20190816/utaddress-213)
[ 4.327577] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 4.454513] systemd-journald[313]: Received request to flush runtime
journal from PID 1
[ 4.504371] acpi_cpufreq: overriding BIOS provided _PSD data
[ 4.511592] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9
[ 4.518987] ACPI: Power Button [PWRB]
[ 4.519684] acpi PNP0C14:02: duplicate WMI GUID
05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 4.526349] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input10
[ 4.534216] acpi PNP0C14:03: duplicate WMI GUID
05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 4.542832] ACPI: Power Button [PWRF]
[ 4.551978] acpi PNP0C14:04: duplicate WMI GUID
05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 4.567070] acpi PNP0C14:05: duplicate WMI GUID
05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 4.578768] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 4.587112] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus
port selection
[ 4.595797] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 4.604340] EFI Variables Facility v0.08 2004-May-17
[ 4.613530] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 4.644992] ccp 0000:0b:00.1: enabling device (0000 -> 0002)
[ 4.653851] dca service started, version 1.12.1
[ 4.663760] ccp 0000:0b:00.1: ccp enabled
[ 4.665098] cryptd: max_cpu_qlen set to 1000
[ 4.669676] setting logging_level(0x000083f8)
[ 4.670962] mpt3sas version 31.100.00.00 loaded
[ 4.672164] mpt3sas_cm0: mpt3sas_base_attach
[ 4.672164] mpt3sas_cm0: mpt3sas_base_map_resources
[ 4.672330] mpt3sas_cm0: 63 BIT PCI BUS DMA ADDRESSING SUPPORTED,
total mem (65777060 kB)
[ 4.672374] mpt3sas_cm0: _base_get_ioc_facts
[ 4.672374] mpt3sas_cm0: _base_wait_for_iocstate
[ 4.682797] offset:data
[ 4.722068] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1
[ 4.722140] pstore: Using crash dump compression: deflate
[ 4.730271] [0x00]:03110206
[ 4.730272] [0x04]:00002e00
[ 4.730272] [0x08]:00000000
[ 4.730272] [0x0c]:00000000
[ 4.730273] [0x10]:00000000
[ 4.744702] bna 0000:03:00.2: firmware: direct-loading firmware
ctfw-3.2.5.1.bin
[ 4.746697] [0x14]:80010280
[ 4.749147] pstore: Registered efi as persistent store backend
[ 4.755437] bna 0000:03:00.2: bar0 mapped to 00000000d5f9a5ca, len 262144
[ 4.762760] [0x18]:22312200
[ 4.762762] [0x1c]:000fa84c
[ 4.859177] [0x20]:02000500
[ 4.859177] [0x24]:00080020
[ 4.859177] [0x28]:0280001d
[ 4.859177] [0x2c]:00d100d0
[ 4.859177] [0x30]:0074000b
[ 4.859178] [0x34]:0020ffe0
[ 4.859178] [0x38]:00800375
[ 4.859178] [0x3c]:000c0009
[ 4.859178] [0x40]:00000000
[ 4.859179] mpt3sas_cm0: CurrentHostPageSize(12)
[ 4.859179] mpt3sas_cm0: hba queue depth(8704), max chains per io(128)
[ 4.859180] mpt3sas_cm0: request frame size(128), reply frame size(128)
[ 4.859187] mpt3sas_cm0: msix is supported, vector_count(128)
[ 4.859187] mpt3sas_cm0: MSI-X vectors supported: 128
[ 4.859188] no of cores: 16, max_msix_vectors: -1
[ 4.859188] mpt3sas_cm0: 0 128
[ 4.860156] mpt3sas_cm0: High IOPs queues : disabled
[ 4.860156] mpt3sas0-msix0: PCI-MSI-X enabled: IRQ 81
[ 4.860157] mpt3sas0-msix1: PCI-MSI-X enabled: IRQ 82
[ 4.860157] mpt3sas0-msix2: PCI-MSI-X enabled: IRQ 83
[ 4.860157] mpt3sas0-msix3: PCI-MSI-X enabled: IRQ 84
[ 4.860157] mpt3sas0-msix4: PCI-MSI-X enabled: IRQ 85
[ 4.860158] mpt3sas0-msix5: PCI-MSI-X enabled: IRQ 86
[ 4.860158] mpt3sas0-msix6: PCI-MSI-X enabled: IRQ 87
[ 4.860158] mpt3sas0-msix7: PCI-MSI-X enabled: IRQ 88
[ 4.860158] mpt3sas0-msix8: PCI-MSI-X enabled: IRQ 89
[ 4.860158] mpt3sas0-msix9: PCI-MSI-X enabled: IRQ 90
[ 4.860159] mpt3sas0-msix10: PCI-MSI-X enabled: IRQ 91
[ 4.860159] mpt3sas0-msix11: PCI-MSI-X enabled: IRQ 92
[ 4.860159] mpt3sas0-msix12: PCI-MSI-X enabled: IRQ 93
[ 4.860159] mpt3sas0-msix13: PCI-MSI-X enabled: IRQ 94
[ 4.860160] mpt3sas0-msix14: PCI-MSI-X enabled: IRQ 95
[ 4.860160] mpt3sas0-msix15: PCI-MSI-X enabled: IRQ 96
[ 4.860160] mpt3sas0-msix16: PCI-MSI-X enabled: IRQ 97
[ 4.860160] mpt3sas0-msix17: PCI-MSI-X enabled: IRQ 98
[ 4.860161] mpt3sas0-msix18: PCI-MSI-X enabled: IRQ 99
[ 4.860161] mpt3sas0-msix19: PCI-MSI-X enabled: IRQ 100
[ 4.860161] mpt3sas0-msix20: PCI-MSI-X enabled: IRQ 101
[ 4.860161] mpt3sas0-msix21: PCI-MSI-X enabled: IRQ 102
[ 4.860161] mpt3sas0-msix22: PCI-MSI-X enabled: IRQ 103
[ 4.860162] mpt3sas0-msix23: PCI-MSI-X enabled: IRQ 104
[ 4.860162] mpt3sas0-msix24: PCI-MSI-X enabled: IRQ 105
[ 4.860162] mpt3sas0-msix25: PCI-MSI-X enabled: IRQ 106
[ 4.860162] mpt3sas0-msix26: PCI-MSI-X enabled: IRQ 107
[ 4.860163] mpt3sas0-msix27: PCI-MSI-X enabled: IRQ 108
[ 4.860163] mpt3sas0-msix28: PCI-MSI-X enabled: IRQ 109
[ 4.860163] mpt3sas0-msix29: PCI-MSI-X enabled: IRQ 110
[ 4.860163] mpt3sas0-msix30: PCI-MSI-X enabled: IRQ 111
[ 4.860164] mpt3sas0-msix31: PCI-MSI-X enabled: IRQ 112
[ 4.860165] mpt3sas_cm0: iomem(0x00000000e0100000),
mapped(0x00000000459c7887), size(1048576)
[ 4.860166] mpt3sas_cm0: ioport(0x000000000000f000), size(256)
[ 4.860484] mpt3sas_cm0: _base_get_ioc_facts
[ 4.860485] mpt3sas_cm0: _base_wait_for_iocstate
[ 4.867615] offset:data
[ 4.867616] [0x00]:03110206
[ 4.867616] [0x04]:00002e00
[ 4.867616] [0x08]:00000000
[ 4.867616] [0x0c]:00000000
[ 4.867616] [0x10]:00000000
[ 4.867617] [0x14]:80010280
[ 4.867617] [0x18]:22312200
[ 4.867617] [0x1c]:000fa84c
[ 4.867617] [0x20]:02000500
[ 4.867617] [0x24]:00080020
[ 4.867618] [0x28]:0280001d
[ 4.867618] [0x2c]:00d100d0
[ 4.867618] [0x30]:0074000b
[ 4.867618] [0x34]:0020ffe0
[ 4.867618] [0x38]:00800375
[ 4.867618] [0x3c]:000c0009
[ 4.867619] [0x40]:00000000
[ 4.867619] mpt3sas_cm0: CurrentHostPageSize(12)
[ 4.867619] mpt3sas_cm0: hba queue depth(8704), max chains per io(128)
[ 4.867620] mpt3sas_cm0: request frame size(128), reply frame size(128)
[ 4.867620] mpt3sas_cm0: _base_make_ioc_ready
[ 4.867625] mpt3sas_cm0: sending message unit reset !!
[ 4.869147] mpt3sas_cm0: message unit reset: SUCCESS
[ 4.869148] mpt3sas_cm0: _base_get_port_facts
[ 4.869437] offset:data
[ 4.869438] [0x00]:05070000
[ 4.869438] [0x04]:00000000
[ 4.869438] [0x08]:00000000
[ 4.869439] [0x0c]:00000000
[ 4.869439] [0x10]:00000000
[ 4.869439] [0x14]:00004000
[ 4.869440] [0x18]:000000e8
[ 4.869440] mpt3sas_cm0: _base_allocate_memory_pools
[ 4.869442] mpt3sas_cm0: scatter gather: sge_in_main_msg(1),
sge_per_chain(7), sge_per_io(128), chains_per_io(19)
[ 4.869457] mpt3sas_cm0: reply post free pool (0x00000000f14f24c8):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869458] mpt3sas_cm0: reply_post_free_dma = (0x37000000)
[ 4.869481] mpt3sas_cm0: reply post free pool (0x000000006a229df0):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869481] mpt3sas_cm0: reply_post_free_dma = (0x37040000)
[ 4.869495] mpt3sas_cm0: reply post free pool (0x00000000bcc04f00):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869496] mpt3sas_cm0: reply_post_free_dma = (0x37080000)
[ 4.869509] mpt3sas_cm0: reply post free pool (0x0000000038b7061a):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869509] mpt3sas_cm0: reply_post_free_dma = (0x370c0000)
[ 4.869523] mpt3sas_cm0: reply post free pool (0x00000000bc80b8a4):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869524] mpt3sas_cm0: reply_post_free_dma = (0x37100000)
[ 4.869537] mpt3sas_cm0: reply post free pool (0x00000000e4eefaee):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869538] mpt3sas_cm0: reply_post_free_dma = (0x37140000)
[ 4.869551] mpt3sas_cm0: reply post free pool (0x000000002cc7f8b5):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869552] mpt3sas_cm0: reply_post_free_dma = (0x37180000)
[ 4.869566] mpt3sas_cm0: reply post free pool (0x00000000f7ab63e2):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869566] mpt3sas_cm0: reply_post_free_dma = (0x371c0000)
[ 4.869582] mpt3sas_cm0: reply post free pool (0x00000000e4d0829b):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869582] mpt3sas_cm0: reply_post_free_dma = (0x37200000)
[ 4.869608] mpt3sas_cm0: reply post free pool (0x00000000e1ef38cd):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869609] mpt3sas_cm0: reply_post_free_dma = (0x37240000)
[ 4.869622] mpt3sas_cm0: reply post free pool (0x00000000e314dcdb):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869623] mpt3sas_cm0: reply_post_free_dma = (0x37280000)
[ 4.869637] mpt3sas_cm0: reply post free pool (0x00000000c721b4f5):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869637] mpt3sas_cm0: reply_post_free_dma = (0x372c0000)
[ 4.869652] mpt3sas_cm0: reply post free pool (0x0000000081958009):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869652] mpt3sas_cm0: reply_post_free_dma = (0x37300000)
[ 4.869667] mpt3sas_cm0: reply post free pool (0x000000005bd18d42):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869667] mpt3sas_cm0: reply_post_free_dma = (0x37340000)
[ 4.869681] mpt3sas_cm0: reply post free pool (0x00000000c701a724):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869681] mpt3sas_cm0: reply_post_free_dma = (0x37380000)
[ 4.869695] mpt3sas_cm0: reply post free pool (0x0000000014701f10):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869696] mpt3sas_cm0: reply_post_free_dma = (0x373c0000)
[ 4.869719] mpt3sas_cm0: reply post free pool (0x0000000032b61596):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869719] mpt3sas_cm0: reply_post_free_dma = (0xc2400000)
[ 4.869737] mpt3sas_cm0: reply post free pool (0x00000000d5897401):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869737] mpt3sas_cm0: reply_post_free_dma = (0xc2440000)
[ 4.869752] mpt3sas_cm0: reply post free pool (0x00000000879105c4):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869753] mpt3sas_cm0: reply_post_free_dma = (0xc2480000)
[ 4.869768] mpt3sas_cm0: reply post free pool (0x00000000ce2e2aec):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869768] mpt3sas_cm0: reply_post_free_dma = (0xc24c0000)
[ 4.869782] mpt3sas_cm0: reply post free pool (0x00000000b09fe51b):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869782] mpt3sas_cm0: reply_post_free_dma = (0xc2500000)
[ 4.869796] mpt3sas_cm0: reply post free pool (0x000000001731eb9f):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869796] mpt3sas_cm0: reply_post_free_dma = (0xc2540000)
[ 4.869811] mpt3sas_cm0: reply post free pool (0x00000000a8c37817):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869811] mpt3sas_cm0: reply_post_free_dma = (0xc2580000)
[ 4.869829] mpt3sas_cm0: reply post free pool (0x00000000bb254aea):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869829] mpt3sas_cm0: reply_post_free_dma = (0xc25c0000)
[ 4.869853] mpt3sas_cm0: reply post free pool (0x00000000198674d9):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869853] mpt3sas_cm0: reply_post_free_dma = (0xc2600000)
[ 4.869867] mpt3sas_cm0: reply post free pool (0x000000009697534a):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869867] mpt3sas_cm0: reply_post_free_dma = (0xc2640000)
[ 4.869881] mpt3sas_cm0: reply post free pool (0x00000000add69645):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869881] mpt3sas_cm0: reply_post_free_dma = (0xc2680000)
[ 4.869907] mpt3sas_cm0: reply post free pool (0x00000000d03ec73a):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869907] mpt3sas_cm0: reply_post_free_dma = (0xc26c0000)
[ 4.869934] mpt3sas_cm0: reply post free pool (0x000000007e0bba8a):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869934] mpt3sas_cm0: reply_post_free_dma = (0xc2700000)
[ 4.869948] mpt3sas_cm0: reply post free pool (0x00000000dade2cb3):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869949] mpt3sas_cm0: reply_post_free_dma = (0xc2740000)
[ 4.869963] mpt3sas_cm0: reply post free pool (0x00000000513ce9a4):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869963] mpt3sas_cm0: reply_post_free_dma = (0xc2780000)
[ 4.869978] mpt3sas_cm0: reply post free pool (0x00000000b7b9c1af):
depth(17712), element_size(8), pool_size(138 kB)
[ 4.869979] mpt3sas_cm0: reply_post_free_dma = (0xc27c0000)
[ 4.869979] mpt3sas_cm0: scsi host: can_queue depth (8580)
[ 4.870110] mpt3sas_cm0: request pool(0x00000000e166287e):
depth(8820), frame_size(128), pool_size(1102 kB)
[ 4.870110] mpt3sas_cm0: request pool: dma(0xfdbe00000)
[ 4.870111] mpt3sas_cm0: scsiio(0x00000000e166287e): depth(8583)
[ 4.872676] mpt3sas_cm0: hi_priority(0x00000000ca256a32): depth(116),
start smid(8584)
[ 4.872677] mpt3sas_cm0: internal(0x000000001da5d167): depth(121),
start smid(8700)
[ 4.974024] mpt3sas_cm0: PCIe sgl pool depth(8583),
element_size(4096), pool_size(34332 kB)
[ 5.031834] pps_core: LinuxPPS API ver. 1 registered
[ 5.035421] mpt3sas_cm0: Number of chains can fit in a PRP page(19)
[ 5.035458] mpt3sas_cm0: chain pool depth(100000), frame_size(128),
pool_size(12500 kB)
[ 5.038944] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@xxxxxxxx>
[ 5.042454] mpt3sas_cm0: sense pool(0x000000007961ebe2): depth(8583),
element_size(96), pool_size(804 kB)
[ 5.445874] bna 0000:03:00.3: bar0 mapped to 000000001c4b2719, len 262144
[ 5.452650] mpt3sas_cm0: sense_dma(0xfd9700000)
[ 5.452887] mpt3sas_cm0: reply pool(0x00000000d032ecfd): depth(8884),
frame_size(128), pool_size(1110 kB)
[ 5.800914] mpt3sas_cm0: reply_dma(0xfd8c00000)
[ 5.800936] mpt3sas_cm0: reply_free pool(0x00000000d7014206):
depth(8884), element_size(4), pool_size(34 kB)
[ 5.800938] mpt3sas_cm0: reply_free_dma (0xfdc110000)
[ 5.800941] mpt3sas_cm0: config page(0x000000005329e894): size(512)
[ 5.839792] mpt3sas_cm0: config_page_dma(0xfdcd9f000)
[ 5.839792] mpt3sas_cm0: Allocated physical memory: size(42885 kB)
[ 5.839793] mpt3sas_cm0: Current Controller Queue Depth(8580),Max
Controller Queue Depth(8704)
[ 5.839794] mpt3sas_cm0: Scatter Gather Elements per IO(128)
[ 5.839813] mpt3sas_cm0: _base_make_ioc_operational
[ 5.888037] mpt3sas_cm0: _base_send_ioc_init
[ 5.888038] offset:data
[ 5.888039] [0x00]:02000004
[ 5.888040] [0x04]:01000000
[ 5.888040] [0x08]:00000000
[ 5.888040] [0x0c]:36000206
[ 5.888041] [0x10]:00000000
[ 5.888041] [0x14]:200c0000
[ 5.888042] [0x18]:00200000
[ 5.888042] [0x1c]:22b44530
[ 5.888043] [0x20]:0000000f
[ 5.888043] [0x24]:0000000f
[ 5.888044] [0x28]:dbe00000
[ 5.888044] [0x2c]:0000000f
[ 5.888044] [0x30]:e4a34000
[ 5.888045] [0x34]:0000000f
[ 5.888045] [0x38]:dc110000
[ 5.888046] [0x3c]:0000000f
[ 5.888046] [0x40]:a24fca94
[ 5.888046] [0x44]:00000174
[ 5.888604] AVX2 version of gcm_enc/dec engaged.
[ 5.888605] AES CTR mode by8 optimization enabled
[ 5.893524] offset:data
[ 5.893525] [0x00]:02050004
[ 5.893525] [0x04]:01000000
[ 5.893525] [0x08]:00000000
[ 5.893526] [0x0c]:00000000
[ 5.893526] [0x10]:00000000
[ 5.893588] mpt3sas_cm0: _base_display_fwpkg_version
[ 5.895074] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 5.896934] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO
address
[ 5.897035] bna 0000:03:00.2 ethEXT: renamed from eth0
[ 5.965957] mpt3sas_cm0: _base_display_fwpkg_version: complete
[ 5.972002] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 5.979462] mpt3sas_cm0: FW Package Version (02.00.05.02)
[ 5.981609] PTP clock support registered
[ 6.126215] mpt3sas_cm0: SAS3408: FWVersion(02.00.05.00),
ChipRevision(0x01), BiosVersion(09.03.00.00)
[ 6.126262] NVMe
[ 6.126270] mpt3sas_cm0: Protocol=(Initiator,Target),
Capabilities=(TLR,EEDP,Diag Trace Buffer,Task Set Full,NCQ)
[ 6.126533] mpt3sas_cm0: _base_event_notification
[ 6.126641] mpt3sas_cm0: _base_event_notification: complete
[ 6.126752] scsi host6: Fusion MPT SAS Host
[ 6.126944] bna 0000:03:00.3 ethLAN: renamed from eth1
[ 6.172199] mpt3sas_cm0: sending port enable !!
[ 6.172315] mpt3sas_cm0: Discovery: (start)
[ 6.172323] mpt3sas_cm0: discovery event: (start)
[ 6.172325] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 6.172328] mpt3sas_cm0: SAS Topology Change List
[ 6.172329] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 6.172337] mpt3sas_cm0: SAS Topology Change List
[ 6.172363] mpt3sas_cm0: SAS Topology Change List
[ 6.172365] mpt3sas_cm0: Discovery: (stop)
[ 6.172367] mpt3sas_cm0: Discovery: (start)
[ 6.172368] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 6.172370] mpt3sas_cm0: SAS Topology Change List
[ 6.172372] mpt3sas_cm0: SAS Topology Change List
[ 6.172374] mpt3sas_cm0: Discovery: (stop)
[ 6.177335] mpt3sas_cm0: host_add: handle(0x0001),
sas_addr(0x500605b00cf4d920), phys(9)
[ 6.177467] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0001), enclosure logical
id(0x500605b00cf4d920) number slots(0)
[ 6.177599] mpt3sas_cm0: sas topology change: (responding)
[ 6.177599] handle(0x0000), enclosure_handle(0x0001)
start_phy(00), count(9)
[ 6.177600] phy(00), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.177600] phy(01), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.177601] phy(02), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.177601] phy(03), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.177601] phy(04), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.177602] phy(05), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.177602] phy(06), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.177602] phy(07), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.177603] phy(08), attached_handle(0x0009): target add: link
rate: new(0x08), old(0x00)
[ 6.177604] mpt3sas_cm0: updating handles for
sas_host(0x500605b00cf4d920)
[ 6.181655] mpt3sas_cm0: _scsih_sas_device_init_add: handle(0x0009),
sas_addr(0x510600b00cf4d920)
[ 6.181656] mpt3sas_cm0: enclosure logical id(0x500605b00cf4d920),
slot(8)
[ 6.181657] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 6.181659] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0002), enclosure logical
id(0x500151b0000020bf) number slots(0)
[ 6.182155] mpt3sas_cm0: sas topology change: (add)
[ 6.182156] handle(0x000a), enclosure_handle(0x0002)
start_phy(00), count(22)
[ 6.182157] phy(06), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.182158] phy(07), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.182159] phy(08), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.182159] phy(09), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.182160] phy(19), attached_handle(0x000b): target add: link
rate: new(0x0a), old(0x0a)
[ 6.182161] mpt3sas_cm0: updating handles for
sas_host(0x500605b00cf4d920)
[ 6.183763] mpt3sas_cm0: expander_add: handle(0x000a),
parent(0x0001), sas_addr(0x500151b0000020bf), phys(26)
[ 6.190346] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.6.0-k
[ 6.193557] mpt3sas_cm0: _scsih_sas_device_init_add: handle(0x000b),
sas_addr(0x500151b0000020b3)
[ 6.197616] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 6.335796] asus_wmi: ASUS WMI generic driver loaded
[ 6.340933] mpt3sas_cm0: enclosure logical id(0x500151b0000020bf),
slot(6)
[ 6.340934] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 6.340934] mpt3sas_cm0: _scsih_determine_boot_device:
current_boot_device(0x500151b0000020b3)
[ 6.340940] mpt3sas_cm0: sas topology change: (responding)
[ 6.349764] pps pps0: new PPS source ptp0
[ 6.358844] handle(0x000a), enclosure_handle(0x0002)
start_phy(22), count(4)
[ 6.358846] phy(24), attached_handle(0x000c): target add: link
rate: new(0x0a), old(0x00)
[ 6.367295] igb 0000:04:00.0: added PHC on eth0
[ 6.370876] mpt3sas_cm0: updating handles for
sas_host(0x500605b00cf4d920)
[ 6.372463] mpt3sas_cm0: _scsih_sas_device_init_add: handle(0x000c),
sas_addr(0x500151b0000020bd)
[ 6.377054] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network
Connection
[ 6.383081] mpt3sas_cm0: enclosure logical id(0x500151b0000020bf),
slot(0)
[ 6.383081] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 6.383086] mpt3sas_cm0: discovery event: (stop)
[ 6.388972] igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1)
24:4b:fe:5e:68:bf
[ 6.388974] igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF
[ 6.394735] mpt3sas_cm0: discovery event: (start)
[ 6.400362] igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s),
2 tx queue(s)
[ 6.434815] [drm] radeon kernel modesetting enabled.
[ 6.440499] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0003), enclosure logical
id(0x500151b0000000bf) number slots(0)
[ 6.446531] radeon 0000:05:00.0: remove_conflicting_pci_framebuffers:
bar 0: 0xd0000000 -> 0xdfffffff
[ 6.458805] mpt3sas_cm0: sas topology change: (add)
[ 6.458812] radeon 0000:05:00.0: remove_conflicting_pci_framebuffers:
bar 2: 0xfc930000 -> 0xfc93ffff
[ 6.464989] handle(0x000d), enclosure_handle(0x0003)
start_phy(00), count(22)
[ 6.471365] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 6.476289] asus_wmi: Initialization: 0x0
[ 6.477487] asus_wmi: BIOS WMI version: 0.9
[ 6.477586] asus_wmi: SFUN value: 0x0
[ 6.477655] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 6.479350] phy(06), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.479419] input: Eee PC WMI hotkeys as
/devices/platform/eeepc-wmi/input/input12
[ 6.484512] fb0: switching to radeondrmfb from EFI VGA
[ 6.669271] phy(07), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.669272] phy(08), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.669273] phy(09), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 6.669274] mpt3sas_cm0: updating handles for
sas_host(0x500605b00cf4d920)
[ 6.673474] mpt3sas_cm0: expander_add: handle(0x000d),
parent(0x0002), sas_addr(0x500151b0000000bf), phys(26)
[ 6.711841] Console: switching to colour dummy device 80x25
[ 6.711869] radeon 0000:05:00.0: vgaarb: deactivate vga console
[ 6.712056] [drm] initializing kernel modesetting (RV515
0x1002:0x7143 0x17AF:0x204E 0x00).
[ 6.712138] ATOM BIOS: 113
[ 6.712161] [drm] Generation 2 PCI interface, using max accessible memory
[ 6.712170] radeon 0000:05:00.0: VRAM: 256M 0x0000000000000000 -
0x000000000FFFFFFF (256M used)
[ 6.712174] radeon 0000:05:00.0: GTT: 512M 0x0000000010000000 -
0x000000002FFFFFFF
[ 6.712184] [drm] Detected VRAM RAM=256M, BAR=256M
[ 6.712186] [drm] RAM width 64bits DDR
[ 6.712244] [TTM] Zone kernel: Available graphics memory: 32888530 KiB
[ 6.712246] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 6.712249] [TTM] Initializing pool allocator
[ 6.712254] [TTM] Initializing DMA pool allocator
[ 6.712270] [drm] radeon: 256M of VRAM memory ready
[ 6.712272] [drm] radeon: 512M of GTT memory ready.
[ 6.712280] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.712994] [drm] Possible lm63 thermal controller at 0x4c
[ 6.713000] [drm] radeon: power management initialized
[ 6.714418] mpt3sas_cm0: port enable: complete from worker thread
[ 6.714420] mpt3sas_cm0: sas topology change: (responding)
[ 6.714421] handle(0x000d), enclosure_handle(0x0003)
start_phy(22), count(4)
[ 6.714423] phy(24), attached_handle(0x000e): target add: link
rate: new(0x0a), old(0x00)
[ 6.714424] mpt3sas_cm0: updating handles for
sas_host(0x500605b00cf4d920)
[ 6.714827] mpt3sas_cm0: _scsih_sas_device_init_add: handle(0x000e),
sas_addr(0x500151b0000000bd)
[ 6.714828] mpt3sas_cm0: enclosure logical id(0x500151b0000000bf),
slot(0)
[ 6.714829] mpt3sas_cm0: enclosure level(0x0000), connector name( C0 )
[ 6.714831] mpt3sas_cm0: discovery event: (stop)
[ 6.719591] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 6.720471] mpt3sas_cm0: port enable: SUCCESS
[ 6.722260] scsi 6:0:0:0: Direct-Access ATA WDC WD5003AZEX-0
1A01 PQ: 0 ANSI: 6
[ 6.722268] scsi 6:0:0:0: SATA: handle(0x000b),
sas_addr(0x500151b0000020b3), phy(19), device_name(0x50014ee20e11ea3d)
[ 6.722271] scsi 6:0:0:0: enclosure logical id (0x500151b0000020bf),
slot(6)
[ 6.722274] scsi 6:0:0:0: enclosure level(0x0000), connector name( C1 )
[ 6.722326] scsi 6:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y),
fua(y), sw_preserve(y)
[ 6.722435] [drm] PCIE GART of 512M enabled (table at
0x0000000000040000).
[ 6.722462] radeon 0000:05:00.0: WB enabled
[ 6.722466] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr
0x0000000010000000 and cpu addr 0x000000001d35a778
[ 6.722471] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.722474] [drm] Driver supports precise vblank timestamp query.
[ 6.722477] radeon 0000:05:00.0: radeon: MSI limited to 32-bit
[ 6.722507] [drm] radeon: irq initialized.
[ 6.722521] [drm] Loading R500 Microcode
[ 6.724438] scsi 6:0:1:0: Enclosure LSI VirtualSES
01 PQ: 0 ANSI: 6
[ 6.724446] scsi 6:0:1:0: set ignore_delay_remove for handle(0x0009)
[ 6.724448] scsi 6:0:1:0: SES: handle(0x0009),
sas_addr(0x510600b00cf4d920), phy(8), device_name(0x0000000000000000)
[ 6.724454] scsi 6:0:1:0: enclosure logical id (0x500605b00cf4d920),
slot(8)
[ 6.724456] scsi 6:0:1:0: enclosure level(0x0000), connector name( C1 )
[ 6.724492] scsi 6:0:1:0: tag#3334 CDB: Mode Sense(6) 1a 00 19 00 40 00
[ 6.724495] mpt3sas_cm0: sas_address(0x510600b00cf4d920), phy(8)
[ 6.724497] mpt3sas_cm0: enclosure logical id(0x500605b00cf4d920),
slot(8)
[ 6.724500] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 6.724503] mpt3sas_cm0: handle(0x0009),
ioc_status(success)(0x0000), smid(3335)
[ 6.724505] mpt3sas_cm0: request_len(64), underflow(0), resid(64)
[ 6.724508] mpt3sas_cm0: tag(0), transfer_count(0),
sc->result(0x00000002)
[ 6.724510] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 6.724513] mpt3sas_cm0: [sense_key,asc,ascq]: [0x05,0x20,0x00],
count(18)
[ 6.724517] mpt3sas_cm0: log_info(0x31200206): originator(PL),
code(0x20), sub_code(0x0206)
[ 6.725106] scsi 6:0:2:0: Enclosure Isilon SEFC SAS2X24 E1
0910 PQ: 0 ANSI: 5
[ 6.725112] scsi 6:0:2:0: set ignore_delay_remove for handle(0x000c)
[ 6.725114] scsi 6:0:2:0: SES: handle(0x000c),
sas_addr(0x500151b0000020bd), phy(24), device_name(0x500151b0000020bd)
[ 6.725119] scsi 6:0:2:0: enclosure logical id (0x500151b0000020bf),
slot(0)
[ 6.725120] scsi 6:0:2:0: enclosure level(0x0000), connector name( C1 )
[ 6.725186] scsi 6:0:2:0: tag#3341 CDB: Mode Sense(6) 1a 00 19 00 40 00
[ 6.725188] mpt3sas_cm0: sas_address(0x500151b0000020bd), phy(24)
[ 6.725190] mpt3sas_cm0: enclosure logical id(0x500151b0000020bf),
slot(0)
[ 6.725191] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 6.725194] mpt3sas_cm0: handle(0x000c), ioc_status(scsi data
underrun)(0x0045), smid(3342)
[ 6.725196] mpt3sas_cm0: request_len(64), underflow(0), resid(64)
[ 6.725197] mpt3sas_cm0: tag(0), transfer_count(0),
sc->result(0x00000002)
[ 6.725199] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 6.725202] mpt3sas_cm0: [sense_key,asc,ascq]: [0x05,0x24,0x00],
count(96)
[ 6.726518] radeon 0000:05:00.0: firmware: direct-loading firmware
radeon/R520_cp.bin
[ 6.726654] [drm] radeon: ring at 0x0000000010001000
[ 6.726694] [drm] ring test succeeded in 3 usecs
[ 6.726847] [drm] ib test succeeded in 0 usecs
[ 6.727250] scsi 6:0:3:0: Enclosure Isilon SEFC SAS2X24 E0
0910 PQ: 0 ANSI: 5
[ 6.727254] scsi 6:0:3:0: set ignore_delay_remove for handle(0x000e)
[ 6.727257] scsi 6:0:3:0: SES: handle(0x000e),
sas_addr(0x500151b0000000bd), phy(24), device_name(0x500151b0000000bd)
[ 6.727261] scsi 6:0:3:0: enclosure logical id (0x500151b0000000bf),
slot(0)
[ 6.727264] scsi 6:0:3:0: enclosure level(0x0000), connector name( C0 )
[ 6.727322] [drm] Radeon Display Connectors
[ 6.727329] scsi 6:0:3:0: tag#3348 CDB: Mode Sense(6) 1a 00 19 00 40 00
[ 6.727331] [drm] Connector 0:
[ 6.727334] [drm] DVI-I-1
[ 6.727335] [drm] HPD1
[ 6.727337] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48
0x7e4c 0x7e4c
[ 6.727339] [drm] Encoders:
[ 6.727341] mpt3sas_cm0: sas_address(0x500151b0000000bd), phy(24)
[ 6.727346] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.727348] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 6.727349] mpt3sas_cm0: enclosure logical id(0x500151b0000000bf),
slot(0)
[ 6.727352] mpt3sas_cm0: enclosure level(0x0000), connector name( C0 )
[ 6.727355] [drm] Connector 1:
[ 6.727357] mpt3sas_cm0: handle(0x000e), ioc_status(scsi data
underrun)(0x0045), smid(3349)
[ 6.727359] mpt3sas_cm0: request_len(64), underflow(0), resid(64)
[ 6.727363] [drm] SVIDEO-1
[ 6.727365] mpt3sas_cm0: tag(0), transfer_count(0),
sc->result(0x00000002)
[ 6.727367] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 6.727371] [drm] Encoders:
[ 6.727374] mpt3sas_cm0: [sense_key,asc,ascq]: [0x05,0x24,0x00],
count(96)
[ 6.727393] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 6.727397] [drm] Connector 2:
[ 6.727399] [drm] DVI-I-2
[ 6.727403] [drm] HPD2
[ 6.727406] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58
0x7e5c 0x7e5c
[ 6.727411] [drm] Encoders:
[ 6.727414] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 6.727416] [drm] DFP3: INTERNAL_LVTM1
[ 6.729016] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 6.729130] scsi 6:0:1:0: Attached scsi generic sg2 type 13
[ 6.729229] scsi 6:0:2:0: Attached scsi generic sg3 type 13
[ 6.729351] scsi 6:0:3:0: Attached scsi generic sg4 type 13
[ 6.731196] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/466 GiB)
[ 6.731202] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 6.734934] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.734938] sd 6:0:0:0: [sdb] Mode Sense: 9b 00 10 08
[ 6.735819] sd 6:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[ 6.735871] sd 6:0:0:0: tag#2632 CDB: Report supported operation
codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 6.735876] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 6.735880] mpt3sas_cm0: enclosure logical id(0x500151b0000020bf),
slot(6)
[ 6.735883] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 6.735886] mpt3sas_cm0: handle(0x000b),
ioc_status(success)(0x0000), smid(2633)
[ 6.735890] mpt3sas_cm0: request_len(512), underflow(0), resid(512)
[ 6.735893] mpt3sas_cm0: tag(65535), transfer_count(0),
sc->result(0x00000002)
[ 6.735897] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 6.735901] mpt3sas_cm0: [sense_key,asc,ascq]: [0x05,0x20,0x00],
count(18)
[ 6.753527] XFS (sda4): Mounting V5 Filesystem
[ 6.757895] kvm: disabled by bios
[ 6.772663] XFS (sda4): Ending clean mount
[ 6.774348] xfs filesystem being mounted at /home supports timestamps
until 2038 (0x7fffffff)
[ 6.817034] sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[ 6.825081] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 6.856253] MCE: In-kernel MCE decoding enabled.
[ 6.865907] EDAC amd64: Node 0: DRAM ECC enabled.
[ 6.865911] EDAC amd64: F17h_M70h detected (node 0).
[ 6.866904] EDAC MC: UMC0 chip selects:
[ 6.866905] EDAC amd64: MC: 0: 8192MB 1: 8192MB
[ 6.866907] EDAC amd64: MC: 2: 8192MB 3: 8192MB
[ 6.866961] EDAC MC: UMC1 chip selects:
[ 6.866961] EDAC amd64: MC: 0: 8192MB 1: 8192MB
[ 6.866962] EDAC amd64: MC: 2: 8192MB 3: 8192MB
[ 6.866963] EDAC amd64: using x16 syndromes.
[ 6.866965] EDAC amd64: MCT channel count: 2
[ 6.867220] EDAC MC0: Giving out device to module amd64_edac
controller F17h_M70h: DEV 0000:00:18.3 (INTERRUPT)
[ 6.867228] EDAC PCI0: Giving out device to module amd64_edac
controller EDAC PCI controller: DEV 0000:00:18.0 (POLLED)
[ 6.867230] AMD64 EDAC driver v3.5.0
[ 6.875930] kvm: disabled by bios
[ 6.889531] [drm] fb mappable at 0xD00C0000
[ 6.889534] [drm] vram apper at 0xD0000000
[ 6.889535] [drm] size 9216000
[ 6.889536] [drm] fb depth is 24
[ 6.889537] [drm] pitch is 7680
[ 6.889601] fbcon: radeondrmfb (fb0) is primary device
[ 6.891023] sd 6:0:0:0: [sdb] tag#832 CDB: ATA command pass
through(12)/Blank a1 08 2e 00 01 00 00 00 00 ec 00 00
[ 6.891026] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 6.891026] mpt3sas_cm0: enclosure logical id(0x500151b0000020bf),
slot(6)
[ 6.891027] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 6.891028] mpt3sas_cm0: handle(0x000b),
ioc_status(success)(0x0000), smid(833)
[ 6.891029] mpt3sas_cm0: request_len(512), underflow(0), resid(0)
[ 6.891029] mpt3sas_cm0: tag(0), transfer_count(512),
sc->result(0x00000002)
[ 6.891030] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 6.891031] mpt3sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d],
count(22)
[ 6.891534] scsi 6:0:1:0: tag#3463 CDB: Receive Diagnostic 1c 01 07
00 20 00
[ 6.891535] mpt3sas_cm0: sas_address(0x510600b00cf4d920), phy(8)
[ 6.891536] mpt3sas_cm0: enclosure logical id(0x500605b00cf4d920),
slot(8)
[ 6.891537] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 6.891537] mpt3sas_cm0: handle(0x0009),
ioc_status(success)(0x0000), smid(3464)
[ 6.891538] mpt3sas_cm0: request_len(32), underflow(0), resid(32)
[ 6.891538] mpt3sas_cm0: tag(0), transfer_count(0),
sc->result(0x00000002)
[ 6.891539] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 6.891539] mpt3sas_cm0: [sense_key,asc,ascq]: [0x05,0x26,0x00],
count(18)
[ 6.891540] mpt3sas_cm0: log_info(0x31200205): originator(PL),
code(0x20), sub_code(0x0205)
[ 6.896634] ses 6:0:1:0: Attached Enclosure device
[ 6.896644] ses 6:0:2:0: Attached Enclosure device
[ 6.896650] ses 6:0:3:0: Attached Enclosure device
[ 6.909222] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 6.909618] EXT4-fs (sda1): mounted filesystem without journal. Opts:
(null)
[ 6.909621] ext2 filesystem being mounted at /boot supports
timestamps until 2038 (0x7fffffff)
[ 6.929509] Console: switching to colour frame buffer device 240x75
[ 6.984066] radeon 0000:05:00.0: fb0: radeondrmfb frame buffer device
[ 7.036501] [drm] Initialized radeon 2.50.0 20080528 for 0000:05:00.0
on minor 0
[ 7.053620] kvm: disabled by bios
[ 7.100352] FAT-fs (sda2): Volume was not properly unmounted. Some
data may be corrupt. Please run fsck.
[ 7.123108] sd 6:0:0:0: [sdb] tag#1426 CDB: ATA command pass
through(12)/Blank a1 08 2e 00 01 00 00 00 00 ec 00 00
[ 7.123333] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 7.123526] mpt3sas_cm0: enclosure logical id(0x500151b0000020bf),
slot(6)
[ 7.123741] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 7.123948] mpt3sas_cm0: handle(0x000b),
ioc_status(success)(0x0000), smid(1427)
[ 7.124182] mpt3sas_cm0: request_len(512), underflow(0), resid(0)
[ 7.124377] mpt3sas_cm0: tag(0), transfer_count(512),
sc->result(0x00000002)
[ 7.124600] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 7.124876] mpt3sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d],
count(22)
[ 7.125499] audit: type=1400 audit(1600450973.541:2):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="nvidia_modprobe" pid=689 comm="apparmor_parser"
[ 7.125878] audit: type=1400 audit(1600450973.541:3):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="nvidia_modprobe//kmod" pid=689 comm="apparmor_parser"
[ 7.137713] audit: type=1400 audit(1600450973.541:4):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/bin/man" pid=690 comm="apparmor_parser"
[ 7.149345] audit: type=1400 audit(1600450973.541:5):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="man_filter" pid=690 comm="apparmor_parser"
[ 7.149347] audit: type=1400 audit(1600450973.541:6):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="man_groff" pid=690 comm="apparmor_parser"
[ 7.149350] audit: type=1400 audit(1600450973.549:7):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/sbin/ntpd" pid=691 comm="apparmor_parser"
[ 7.185702] kvm: disabled by bios
[ 7.292119] kvm: disabled by bios
[ 7.359061] kvm: disabled by bios
[ 7.450526] kvm: disabled by bios
[ 7.546800] kvm: disabled by bios
[ 7.601959] sd 6:0:0:0: [sdb] tag#278 CDB: ATA command pass
through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 7.601962] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 7.601963] mpt3sas_cm0: enclosure logical id(0x500151b0000020bf),
slot(6)
[ 7.601964] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 7.601965] mpt3sas_cm0: handle(0x000b),
ioc_status(success)(0x0000), smid(279)
[ 7.601966] mpt3sas_cm0: request_len(0), underflow(0), resid(0)
[ 7.601967] mpt3sas_cm0: tag(0), transfer_count(0),
sc->result(0x00000002)
[ 7.601968] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 7.601969] mpt3sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d],
count(22)
[ 7.610237] sd 6:0:0:0: [sdb] tag#284 CDB: ATA command pass
through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 7.727125] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 7.727125] mpt3sas_cm0: enclosure logical id(0x500151b0000020bf),
slot(6)
[ 7.727126] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 7.727127] mpt3sas_cm0: handle(0x000b),
ioc_status(success)(0x0000), smid(285)
[ 7.727127] mpt3sas_cm0: request_len(0), underflow(0), resid(0)
[ 7.727128] mpt3sas_cm0: tag(0), transfer_count(0),
sc->result(0x00000002)
[ 7.727128] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 7.727129] mpt3sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d],
count(22)
[ 7.734211] sd 6:0:0:0: [sdb] tag#354 CDB: ATA command pass
through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 7.838779] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 7.838780] mpt3sas_cm0: enclosure logical id(0x500151b0000020bf),
slot(6)
[ 7.838781] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 7.838782] mpt3sas_cm0: handle(0x000b),
ioc_status(success)(0x0000), smid(355)
[ 7.838783] mpt3sas_cm0: request_len(0), underflow(0), resid(0)
[ 7.838783] mpt3sas_cm0: tag(0), transfer_count(0),
sc->result(0x00000002)
[ 7.838784] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 7.838785] mpt3sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d],
count(22)
[ 7.885268] sd 6:0:0:0: [sdb] tag#1427 CDB: ATA command pass
through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 7.951419] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 7.951419] mpt3sas_cm0: enclosure logical id(0x500151b0000020bf),
slot(6)
[ 7.951420] mpt3sas_cm0: enclosure level(0x0000), connector name( C1 )
[ 7.951420] mpt3sas_cm0: handle(0x000b),
ioc_status(success)(0x0000), smid(1428)
[ 7.951421] mpt3sas_cm0: request_len(0), underflow(0), resid(0)
[ 7.951421] mpt3sas_cm0: tag(0), transfer_count(0),
sc->result(0x00000002)
[ 7.951421] mpt3sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 7.951421] mpt3sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d],
count(22)
[ 8.052627] kvm: disabled by bios
[ 8.146950] mpt3sas_cm0: _ctl_getiocinfo: enter
[ 8.158984] mpt3sas_cm0: ctl_request: ioc_facts, smid(8581)
[ 8.171051] mpt3sas_cm0: ctl_done: ioc_facts, smid(8581)
[ 8.183184] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.195402] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.207636] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.219908] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.219918] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.244861] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.244977] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.270004] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.270081] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.295472] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.295513] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.321310] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.321319] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.347465] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.347521] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.374058] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.374097] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.400984] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.401000] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.427990] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.428001] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.428019] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.469069] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.469103] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.496705] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.496721] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.524986] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.525022] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.553582] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.553614] kvm: disabled by bios
[ 8.553819] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.553858] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.553960] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.553973] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.553991] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.553996] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554049] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554170] mpt3sas_cm0: _ctl_btdh_mapping
[ 8.554174] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554186] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554191] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554207] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554212] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.554228] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.554229] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 8.554230] mpt3sas_cm0: sas_address(0x510600b00cf4d920), phy(8)
[ 8.554230] mpt3sas_cm0:
enclosure_logical_id(0x500605b00cf4d920), slot(8)
[ 8.554236] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.554251] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.554251] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 8.554252] mpt3sas_cm0: sas_address(0x510600b00cf4d920), phy(8)
[ 8.554252] mpt3sas_cm0:
enclosure_logical_id(0x500605b00cf4d920), slot(8)
[ 8.554257] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554270] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554274] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554290] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554295] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554307] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554413] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554444] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554447] mpt3sas_cm0: _ctl_btdh_mapping
[ 8.554450] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554463] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554467] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554483] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.554488] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.554946] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.554946] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 8.554947] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 8.554947] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 8.554961] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.555383] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.555383] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 8.555384] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 8.555384] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 8.555457] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x25),
cdb_len(10), smid(8581)
[ 8.555511] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x25), cdb_len(10),
smid(8581)
[ 8.555522] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.556001] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.556002] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 8.556002] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 8.556002] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 8.556007] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.556420] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.556420] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 8.556420] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 8.556421] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 8.556425] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556467] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556512] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556553] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556565] mpt3sas_cm0: _ctl_btdh_mapping
[ 8.556568] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556580] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556591] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556613] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556620] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.556776] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.556776] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 8.556776] mpt3sas_cm0: sas_address(0x500151b0000020bd), phy(24)
[ 8.556777] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(0)
[ 8.556781] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.556892] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.556892] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 8.556893] mpt3sas_cm0: sas_address(0x500151b0000020bd), phy(24)
[ 8.556893] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(0)
[ 8.556898] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556910] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556915] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556931] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556936] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556948] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.556952] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.557005] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.557021] mpt3sas_cm0: _ctl_btdh_mapping
[ 8.557024] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.557046] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.557056] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.557080] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.557088] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.557265] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.557271] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 8.557272] mpt3sas_cm0: sas_address(0x500151b0000000bd), phy(24)
[ 8.557272] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000000bf), slot(0)
[ 8.557291] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.557372] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 8.557372] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 8.557372] mpt3sas_cm0: sas_address(0x500151b0000000bd), phy(24)
[ 8.557373] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000000bf), slot(0)
[ 8.557377] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.557390] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.557395] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.557417] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 8.557418] mpt3sas_cm0: iocstatus(0x0022), loginfo(0x310f0400)
[ 8.557423] mpt3sas_cm0: ctl_request: fw_upload, smid(8581)
[ 8.557469] mpt3sas_cm0: ctl_done: fw_upload, smid(8581)
[ 8.557596] mpt3sas_cm0: ctl_request: fw_upload, smid(8581)
[ 8.557618] mpt3sas_cm0: ctl_done: fw_upload, smid(8581)
[ 8.557626] mpt3sas_cm0: ctl_request: fw_upload, smid(8581)
[ 9.160394] bna 0000:03:00.3 ethLAN: link up
[ 10.067792] IPv6: ADDRCONF(NETDEV_CHANGE): ethLAN: link becomes ready
[ 10.148328] kvm: disabled by bios
[ 10.187178] kvm: disabled by bios
[ 10.242453] kvm: disabled by bios
[ 10.309501] kvm: disabled by bios
[ 10.369883] kvm: disabled by bios
[ 10.425949] kvm: disabled by bios
[ 68.879752] mpt3sas_cm0: Command Timeout
[ 68.887309] mf:
[ 68.887309] 12000002
[ 68.901510] 00000000
[ 68.908379] 00000000
[ 68.908379] 00000000
[ 68.908379] 00000000
[ 68.908380] 000c0000
[ 68.908380] 00000000
[ 68.908380] 00010000
[ 68.908381]
[ 68.908381] 00010000
[ 68.908383] mpt3sas_cm0: mpt3sas_base_hard_reset_handler: enter
[ 68.908391] mpt3sas_cm0: mpt3sas_scsih_pre_reset_handler:
MPT3_IOC_PRE_RESET
[ 68.989895] mpt3sas_cm0: mpt3sas_ctl_pre_reset_handler:
MPT3_IOC_PRE_RESET
[ 68.989896] mpt3sas_cm0: _base_pre_reset_handler: MPT3_IOC_PRE_RESET
[ 68.989900] mpt3sas_cm0: _base_make_ioc_ready
[ 68.989901] mpt3sas_cm0: sending diag reset !!
[ 69.745230] mpt3sas_cm0: diag reset: SUCCESS
[ 69.751663] mpt3sas_cm0: mpt3sas_scsih_after_reset_handler:
MPT3_IOC_AFTER_RESET
[ 69.758505] mpt3sas_cm0: completing 0 cmds
[ 69.765288] mpt3sas_cm0: mpt3sas_ctl_after_reset_handler:
MPT3_IOC_AFTER_RESET
[ 69.772370] mpt3sas_cm0: _base_after_reset_handler: MPT3_IOC_AFTER_RESET
[ 69.772371] mpt3sas_cm0: _base_get_ioc_facts
[ 69.772371] mpt3sas_cm0: _base_wait_for_iocstate
[ 69.811726] offset:data
[ 69.818874] [0x00]:03110206
[ 69.826173] [0x04]:00002e00
[ 69.833499] [0x08]:00000000
[ 69.833500] [0x0c]:00000000
[ 69.833501] [0x10]:00000000
[ 69.833502] [0x14]:80010080
[ 69.833504] [0x18]:22312200
[ 69.833506] [0x1c]:000fa84c
[ 69.833507] [0x20]:02000500
[ 69.833510] [0x24]:00080020
[ 69.892476] [0x28]:0280001d
[ 69.892477] [0x2c]:00d100d0
[ 69.892477] [0x30]:0074000b
[ 69.892478] [0x34]:0020ffe0
[ 69.892478] [0x38]:00800375
[ 69.892479] [0x3c]:00000009
[ 69.892479] [0x40]:00000000
[ 69.892480] mpt3sas_cm0: CurrentHostPageSize is 0: Setting default
host page size to 4k
[ 69.892480] mpt3sas_cm0: CurrentHostPageSize(0)
[ 69.892481] mpt3sas_cm0: hba queue depth(8704), max chains per io(128)
[ 69.892482] mpt3sas_cm0: request frame size(128), reply frame size(128)
[ 69.892483] mpt3sas_cm0: _base_make_ioc_operational
[ 69.893121] mpt3sas_cm0: _base_send_ioc_init
[ 69.991186] offset:data
[ 69.991186] [0x00]:02000004
[ 69.991187] [0x04]:01000000
[ 69.991187] [0x08]:00000000
[ 69.991188] [0x0c]:36000206
[ 69.991188] [0x10]:00000000
[ 69.991188] [0x14]:200c0000
[ 69.991189] [0x18]:00200000
[ 69.991189] [0x1c]:22b44530
[ 69.991189] [0x20]:0000000f
[ 69.991190] [0x24]:0000000f
[ 69.991190] [0x28]:dbe00000
[ 69.991191] [0x2c]:0000000f
[ 69.991191] [0x30]:e4a34000
[ 69.991191] [0x34]:0000000f
[ 69.991192] [0x38]:dc110000
[ 69.991192] [0x3c]:0000000f
[ 69.991192] [0x40]:a250c7b5
[ 69.991193] [0x44]:00000174
[ 70.022796] offset:data
[ 70.118934] [0x00]:02050004
[ 70.118935] [0x04]:01000000
[ 70.118935] [0x08]:00000000
[ 70.118936] [0x0c]:00000000
[ 70.118936] [0x10]:00000000
[ 70.118939] mpt3sas_cm0: _base_display_fwpkg_version
[ 70.191290] mpt3sas_cm0: _base_display_fwpkg_version: complete
[ 70.195623] mpt3sas_cm0: FW Package Version (02.00.05.02)
[ 70.200410] mpt3sas_cm0: SAS3408: FWVersion(02.00.05.00),
ChipRevision(0x01), BiosVersion(09.03.00.00)
[ 70.205150] NVMe
[ 70.205150] mpt3sas_cm0: Protocol=(Initiator,Target),
Capabilities=(TLR,EEDP,Diag Trace Buffer,Task Set Full,NCQ)
[ 70.210036] mpt3sas_cm0: _base_event_notification
[ 70.220814] mpt3sas_cm0: _base_event_notification: complete
[ 70.220814] mpt3sas_cm0: sending port enable !!
[ 71.853536] mpt3sas_cm0: Discovery: (start)
[ 71.859026] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 71.859030] mpt3sas_cm0: discovery event: (start)
[ 71.864731] mpt3sas_cm0: SAS Topology Change List
[ 71.864732] mpt3sas_cm0: SAS Topology Change List
[ 71.864734] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 71.864735] mpt3sas_cm0: SAS Topology Change List
[ 71.870479] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0001), enclosure logical
id(0x500605b00cf4d920) number slots(0)
[ 71.876158] mpt3sas_cm0: SAS Topology Change List
[ 71.910000] mpt3sas_cm0: sas topology change: (responding)
[ 71.910001] handle(0x0000), enclosure_handle(0x0001)
start_phy(08), count(1)
[ 71.910002] phy(08), attached_handle(0x0009): target add: link
rate: new(0x08), old(0x00)
[ 71.910003] mpt3sas_cm0: sas topology change: (responding)
[ 71.910004] handle(0x0000), enclosure_handle(0x0001)
start_phy(00), count(7)
[ 71.910006] phy(00), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 71.945304] phy(02), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 71.945304] phy(04), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 71.945304] phy(06), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 71.945313] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0002), enclosure logical
id(0x500151b0000020bf) number slots(0)
[ 71.975885] mpt3sas_cm0: sas topology change: (add)
[ 71.975887] handle(0x000a), enclosure_handle(0x0002)
start_phy(00), count(22)
[ 71.975888] phy(06), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 71.975888] phy(07), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 71.975889] phy(08), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 71.975890] phy(09), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 71.975891] phy(19), attached_handle(0x000b): target add: link
rate: new(0x0a), old(0x00)
[ 71.975892] mpt3sas_cm0: sas topology change: (responding)
[ 71.975892] handle(0x000a), enclosure_handle(0x0002)
start_phy(22), count(4)
[ 71.975893] phy(24), attached_handle(0x000c): target add: link
rate: new(0x0a), old(0x00)
[ 72.103541] mpt3sas_cm0: Discovery: (start)
[ 72.110979] mpt3sas_cm0: SAS Topology Change List
[ 72.110982] mpt3sas_cm0: discovery event: (start)
[ 72.118591] mpt3sas_cm0: SAS Topology Change List
[ 72.118592] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 72.118593] mpt3sas_cm0: SAS Topology Change List
[ 72.118598] mpt3sas_cm0: SAS Topology Change List
[ 72.156314] mpt3sas_cm0: sas topology change: (responding)
[ 72.156315] handle(0x0000), enclosure_handle(0x0001)
start_phy(01), count(7)
[ 72.156315] phy(01), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 72.156316] phy(02), attached_handle(0x000a): target responding:
link rate: new(0x0a), old(0x00)
[ 72.156316] phy(03), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 72.156316] phy(04), attached_handle(0x000a): target responding:
link rate: new(0x0a), old(0x00)
[ 72.156317] phy(05), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 72.156317] phy(06), attached_handle(0x000a): target responding:
link rate: new(0x0a), old(0x00)
[ 72.156318] phy(07), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 72.156318] mpt3sas_cm0: sas topology change: (responding)
[ 72.156318] handle(0x000a), enclosure_handle(0x0002)
start_phy(19), count(1)
[ 72.156319] phy(19), attached_handle(0x000b): link rate change:
link rate: new(0x0a), old(0x0a)
[ 72.156320] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0003), enclosure logical
id(0x500151b0000000bf) number slots(0)
[ 72.156320] mpt3sas_cm0: sas topology change: (add)
[ 72.156321] handle(0x000d), enclosure_handle(0x0003)
start_phy(00), count(22)
[ 72.156321] phy(06), attached_handle(0x0005): link rate change:
link rate: new(0x0a), old(0x00)
[ 72.156321] phy(07), attached_handle(0x0005): link rate change:
link rate: new(0x0a), old(0x00)
[ 72.156322] phy(08), attached_handle(0x0005): link rate change:
link rate: new(0x0a), old(0x00)
[ 72.156323] phy(09), attached_handle(0x0005): link rate change:
link rate: new(0x0a), old(0x00)
[ 72.156325] mpt3sas_cm0: sas topology change: (responding)
[ 72.156326] handle(0x000d), enclosure_handle(0x0003)
start_phy(22), count(4)
[ 72.156328] phy(24), attached_handle(0x000e): target add: link
rate: new(0x0a), old(0x00)
[ 72.353925] mpt3sas_cm0: Discovery: (stop)
[ 72.371312] mpt3sas_cm0: Discovery: (stop)
[ 72.371315] mpt3sas_cm0: discovery event: (stop)
[ 72.371315] mpt3sas_cm0: discovery event: (stop)
[ 77.353498] mpt3sas_cm0: port enable: SUCCESS
[ 77.363833] mpt3sas_cm0: mpt3sas_scsih_reset_done_handler:
MPT3_IOC_DONE_RESET
[ 77.374684] mpt3sas_cm0: search for end-devices: start
[ 77.385546] scsi target6:0:1: handle(0x0009),
sas_addr(0x510600b00cf4d920)
[ 77.396152] scsi target6:0:1: enclosure logical
id(0x500605b00cf4d920), slot(8)
[ 77.406843] scsi target6:0:0: handle(0x000b),
sas_addr(0x500151b0000020b3)
[ 77.417268] scsi target6:0:0: enclosure logical
id(0x500151b0000020bf), slot(6)
[ 77.427710] scsi target6:0:2: handle(0x000c),
sas_addr(0x500151b0000020bd)
[ 77.427712] scsi target6:0:2: enclosure logical
id(0x500151b0000020bf), slot(0)
[ 77.448783] scsi target6:0:3: handle(0x000e),
sas_addr(0x500151b0000000bd)
[ 77.459308] scsi target6:0:3: enclosure logical
id(0x500151b0000000bf), slot(0)
[ 77.470000] mpt3sas_cm0: search for end-devices: complete
[ 77.480641] mpt3sas_cm0: search for end-devices: start
[ 77.491272] mpt3sas_cm0: search for PCIe end-devices: complete
[ 77.502007] mpt3sas_cm0: search for expanders: start
[ 77.502113] expander present: handle(0x000a),
sas_addr(0x500151b0000020bf)
[ 77.523613] expander present: handle(0x000d),
sas_addr(0x500151b0000000bf)
[ 77.534367] mpt3sas_cm0: search for expanders: complete
[ 77.545023] mpt3sas_cm0: mpt3sas_ctl_reset_done_handler:
MPT3_IOC_DONE_RESET
[ 77.555713] mpt3sas_cm0: _base_reset_done_handler: MPT3_IOC_DONE_RESET
[ 77.555713] mpt3sas_cm0: mpt3sas_base_hard_reset_handler: SUCCESS
[ 77.555714] mpt3sas_cm0: mpt3sas_base_hard_reset_handler: exit
[ 78.575634] mpt3sas_cm0: removing unresponding devices: start
[ 78.585937] mpt3sas_cm0: removing unresponding devices: end-devices
[ 78.596230] mpt3sas_cm0: Removing unresponding devices: pcie end-devices
[ 78.606367] mpt3sas_cm0: removing unresponding devices: expanders
[ 78.606368] mpt3sas_cm0: removing unresponding devices: complete
[ 78.606369] mpt3sas_cm0: scan devices: start
[ 78.606370] mpt3sas_cm0: updating handles for
sas_host(0x500605b00cf4d920)
[ 78.607152] mpt3sas_cm0: scan devices: expanders start
[ 78.659435] mpt3sas_cm0: break from expander scan:
ioc_status(0x0022), loginfo(0x310f0400)
[ 78.669551] mpt3sas_cm0: scan devices: expanders complete
[ 78.669552] mpt3sas_cm0: scan devices: end devices start
[ 78.670587] mpt3sas_cm0: break from end device scan:
ioc_status(0x0022), loginfo(0x310f0400)
[ 78.699907] mpt3sas_cm0: scan devices: end devices complete
[ 78.699907] mpt3sas_cm0: scan devices: pcie end devices start
[ 78.700119] mpt3sas_cm0: break from pcie end device scan:
ioc_status(0x0022), loginfo(0x310f0400)
[ 78.731217] mpt3sas_cm0: pcie devices: pcie end devices complete
[ 78.731218] mpt3sas_cm0: scan devices: complete
[ 677.567291] mpt3sas_cm0: _ctl_getiocinfo: enter
[ 677.577460] mpt3sas_cm0: ctl_request: ioc_facts, smid(8581)
[ 677.587613] mpt3sas_cm0: ctl_done: ioc_facts, smid(8581)
[ 677.597890] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.608186] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.618657] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.629266] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.629272] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.650852] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.650858] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.672893] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.683876] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.684047] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.706014] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.706122] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.728363] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.739624] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.739647] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.762200] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.762205] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.784756] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.795984] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.807221] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.807234] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.829694] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.829699] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.852316] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.863907] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.864137] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.887400] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.887548] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.910906] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.922642] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.922651] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.946589] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.946594] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.971078] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.983319] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 677.983553] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.007850] mpt3sas_cm0: _ctl_btdh_mapping
[ 678.007906] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.032405] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.044818] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.045057] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.069814] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.069952] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.094872] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 678.094873] mpt3sas_cm0: sas_address(0x510600b00cf4d920), phy(8)
[ 678.094874] mpt3sas_cm0:
enclosure_logical_id(0x500605b00cf4d920), slot(8)
[ 678.095062] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.145198] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.157844] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 678.157845] mpt3sas_cm0: sas_address(0x510600b00cf4d920), phy(8)
[ 678.157845] mpt3sas_cm0:
enclosure_logical_id(0x500605b00cf4d920), slot(8)
[ 678.158021] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.208846] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.209066] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.234755] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.234987] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.261144] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.274521] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.274696] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.301744] mpt3sas_cm0: _ctl_btdh_mapping
[ 678.301753] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.329204] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.329439] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.356952] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.357046] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.594081] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.607903] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 678.621760] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 678.635683] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 678.649580] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.663749] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.677515] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 678.691429] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 678.705367] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 678.719399] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x25),
cdb_len(10), smid(8581)
[ 678.733468] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x25), cdb_len(10),
smid(8581)
[ 678.733469] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 678.733470] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 678.733471] mpt3sas_cm0: scsi_state(0x01), scsi_status(0x02)
[ 678.733482] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x25),
cdb_len(10), smid(8581)
[ 678.802563] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x25), cdb_len(10),
smid(8581)
[ 678.816233] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.816637] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.843527] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 678.843528] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 678.843528] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 678.843704] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.897753] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 678.910995] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 678.924279] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 678.937495] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 678.950696] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.963950] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.963956] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.990425] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 678.990429] mpt3sas_cm0: _ctl_btdh_mapping
[ 679.016727] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.016942] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.043201] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.043330] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.069674] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 679.082995] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 679.096031] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 679.109094] mpt3sas_cm0: sas_address(0x500151b0000020bd), phy(24)
[ 679.122090] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(0)
[ 679.135067] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 679.148087] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 679.160889] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 679.173705] mpt3sas_cm0: sas_address(0x500151b0000020bd), phy(24)
[ 679.186455] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(0)
[ 679.199192] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.211977] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.211993] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.237519] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.237531] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.263052] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.263200] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.288658] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.301510] mpt3sas_cm0: _ctl_btdh_mapping
[ 679.301518] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.327333] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.327568] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.353457] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.366563] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 679.379860] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 679.392932] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 679.406032] mpt3sas_cm0: sas_address(0x500151b0000000bd), phy(24)
[ 679.419061] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000000bf), slot(0)
[ 679.432073] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 679.445117] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 679.457961] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 679.470818] mpt3sas_cm0: sas_address(0x500151b0000000bd), phy(24)
[ 679.483605] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000000bf), slot(0)
[ 679.496384] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.509207] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.509227] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.534847] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 679.534847] mpt3sas_cm0: iocstatus(0x0022), loginfo(0x310f0400)
[ 679.534854] mpt3sas_cm0: ctl_request: fw_upload, smid(8581)
[ 679.573022] mpt3sas_cm0: ctl_done: fw_upload, smid(8581)
[ 679.585629] mpt3sas_cm0: ctl_request: fw_upload, smid(8581)
[ 679.585720] mpt3sas_cm0: ctl_done: fw_upload, smid(8581)
[ 679.610582] mpt3sas_cm0: ctl_request: fw_upload, smid(8581)
[ 740.619512] mpt3sas_cm0: Command Timeout
[ 740.631765] mf:
[ 740.631765] 12000002
[ 740.656037] 00000000
[ 740.668023] 00000000
[ 740.668024] 00000000
[ 740.668024] 00000000
[ 740.668024] 000c0000
[ 740.668025] 00000000
[ 740.668025] 00010000
[ 740.668025]
[ 740.668026] 00010000
[ 740.668027] mpt3sas_cm0: mpt3sas_base_hard_reset_handler: enter
[ 740.668041] mpt3sas_cm0: mpt3sas_scsih_pre_reset_handler:
MPT3_IOC_PRE_RESET
[ 740.812296] mpt3sas_cm0: mpt3sas_ctl_pre_reset_handler:
MPT3_IOC_PRE_RESET
[ 740.812297] mpt3sas_cm0: _base_pre_reset_handler: MPT3_IOC_PRE_RESET
[ 740.812300] mpt3sas_cm0: _base_make_ioc_ready
[ 740.812302] mpt3sas_cm0: sending diag reset !!
[ 741.609001] mpt3sas_cm0: diag reset: SUCCESS
[ 741.619266] mpt3sas_cm0: mpt3sas_scsih_after_reset_handler:
MPT3_IOC_AFTER_RESET
[ 741.629752] mpt3sas_cm0: completing 0 cmds
[ 741.629753] mpt3sas_cm0: mpt3sas_ctl_after_reset_handler:
MPT3_IOC_AFTER_RESET
[ 741.629754] mpt3sas_cm0: _base_after_reset_handler: MPT3_IOC_AFTER_RESET
[ 741.629755] mpt3sas_cm0: _base_get_ioc_facts
[ 741.629755] mpt3sas_cm0: _base_wait_for_iocstate
[ 741.682512] offset:data
[ 741.692264] [0x00]:03110206
[ 741.701987] [0x04]:00002e00
[ 741.711559] [0x08]:00000000
[ 741.711559] [0x0c]:00000000
[ 741.711560] [0x10]:00000000
[ 741.711560] [0x14]:80010080
[ 741.711561] [0x18]:22312200
[ 741.711561] [0x1c]:000fa84c
[ 741.711562] [0x20]:02000500
[ 741.711564] [0x24]:00080020
[ 741.711567] [0x28]:0280001d
[ 741.711569] [0x2c]:00d100d0
[ 741.800018] [0x30]:0074000b
[ 741.800019] [0x34]:0020ffe0
[ 741.800019] [0x38]:00800375
[ 741.800019] [0x3c]:00000009
[ 741.800020] [0x40]:00000000
[ 741.800021] mpt3sas_cm0: CurrentHostPageSize is 0: Setting default
host page size to 4k
[ 741.800022] mpt3sas_cm0: CurrentHostPageSize(0)
[ 741.800023] mpt3sas_cm0: hba queue depth(8704), max chains per io(128)
[ 741.861639] mpt3sas_cm0: request frame size(128), reply frame size(128)
[ 741.861640] mpt3sas_cm0: _base_make_ioc_operational
[ 741.863502] mpt3sas_cm0: _base_send_ioc_init
[ 741.883383] offset:data
[ 741.883383] [0x00]:02000004
[ 741.883384] [0x04]:01000000
[ 741.883384] [0x08]:00000000
[ 741.883384] [0x0c]:36000206
[ 741.883385] [0x10]:00000000
[ 741.883385] [0x14]:200c0000
[ 741.883386] [0x18]:00200000
[ 741.883386] [0x1c]:22b44530
[ 741.883386] [0x20]:0000000f
[ 741.883387] [0x24]:0000000f
[ 741.883388] [0x28]:dbe00000
[ 741.957933] [0x2c]:0000000f
[ 741.957933] [0x30]:e4a34000
[ 741.957934] [0x34]:0000000f
[ 741.957934] [0x38]:dc110000
[ 741.957935] [0x3c]:0000000f
[ 741.957935] [0x40]:a25b084d
[ 741.957936] [0x44]:00000174
[ 741.984651] offset:data
[ 741.996808] [0x00]:02050004
[ 741.996808] [0x04]:01000000
[ 741.996809] [0x08]:00000000
[ 741.996809] [0x0c]:00000000
[ 741.996809] [0x10]:00000000
[ 741.996813] mpt3sas_cm0: _base_display_fwpkg_version
[ 742.069218] mpt3sas_cm0: _base_display_fwpkg_version: complete
[ 742.073541] mpt3sas_cm0: FW Package Version (02.00.05.02)
[ 742.078297] mpt3sas_cm0: SAS3408: FWVersion(02.00.05.00),
ChipRevision(0x01), BiosVersion(09.03.00.00)
[ 742.083024] NVMe
[ 742.083024] mpt3sas_cm0: Protocol=(Initiator,Target),
Capabilities=(TLR,EEDP,Diag Trace Buffer,Task Set Full,NCQ)
[ 742.088068] mpt3sas_cm0: _base_event_notification
[ 742.098677] mpt3sas_cm0: _base_event_notification: complete
[ 742.104153] mpt3sas_cm0: sending port enable !!
[ 743.841837] mpt3sas_cm0: Discovery: (start)
[ 743.847343] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 743.847347] mpt3sas_cm0: discovery event: (start)
[ 743.853060] mpt3sas_cm0: SAS Topology Change List
[ 743.853062] mpt3sas_cm0: SAS Topology Change List
[ 743.853063] mpt3sas_cm0: Discovery: (start)
[ 743.853065] mpt3sas_cm0: SAS Topology Change List
[ 743.860051] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0001), enclosure logical
id(0x500605b00cf4d920) number slots(0)
[ 743.864520] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 743.864521] mpt3sas_cm0: SAS Topology Change List
[ 743.864523] mpt3sas_cm0: SAS Topology Change List
[ 743.864525] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 743.864526] mpt3sas_cm0: SAS Topology Change List
[ 743.864527] mpt3sas_cm0: SAS Topology Change List
[ 743.870153] mpt3sas_cm0: sas topology change: (responding)
[ 743.930828] handle(0x0000), enclosure_handle(0x0001)
start_phy(08), count(1)
[ 743.930829] phy(08), attached_handle(0x0009): target add: link
rate: new(0x08), old(0x00)
[ 743.930837] mpt3sas_cm0: sas topology change: (responding)
[ 743.930839] handle(0x0000), enclosure_handle(0x0001)
start_phy(00), count(7)
[ 743.930840] phy(00), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 743.930841] phy(02), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 743.930842] phy(04), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 743.930845] phy(06), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 743.930848] mpt3sas_cm0: discovery event: (start)
[ 743.984521] mpt3sas_cm0: sas topology change: (responding)
[ 743.984521] handle(0x0000), enclosure_handle(0x0001)
start_phy(01), count(7)
[ 743.984522] phy(01), attached_handle(0x000b): link rate change:
link rate: new(0x0a), old(0x00)
[ 743.984522] phy(03), attached_handle(0x000b): link rate change:
link rate: new(0x0a), old(0x00)
[ 743.984524] phy(05), attached_handle(0x000b): link rate change:
link rate: new(0x0a), old(0x00)
[ 744.017637] phy(07), attached_handle(0x000b): link rate change:
link rate: new(0x0a), old(0x00)
[ 744.017642] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0003), enclosure logical
id(0x500151b0000000bf) number slots(0)
[ 744.017643] mpt3sas_cm0: sas topology change: (add)
[ 744.017643] handle(0x000b), enclosure_handle(0x0003)
start_phy(00), count(22)
[ 744.017644] phy(06), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 744.017644] phy(07), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 744.017645] phy(08), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 744.017645] phy(09), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 744.017646] mpt3sas_cm0: sas topology change: (responding)
[ 744.017646] handle(0x000b), enclosure_handle(0x0003)
start_phy(22), count(4)
[ 744.017647] phy(24), attached_handle(0x000e): target add: link
rate: new(0x0a), old(0x00)
[ 744.017647] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0002), enclosure logical
id(0x500151b0000020bf) number slots(0)
[ 744.017648] mpt3sas_cm0: sas topology change: (add)
[ 744.017648] handle(0x000a), enclosure_handle(0x0002)
start_phy(00), count(22)
[ 744.017649] phy(06), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 744.017649] phy(07), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 744.017651] phy(08), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 744.091854] mpt3sas_cm0: Discovery: (start)
[ 744.095823] phy(09), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 744.103240] mpt3sas_cm0: Discovery: (stop)
[ 744.103242] mpt3sas_cm0: SAS Topology Change List
[ 744.118548] phy(19), attached_handle(0x000c): target add: link
rate: new(0x0a), old(0x00)
[ 744.203304] mpt3sas_cm0: sas topology change: (responding)
[ 744.203305] handle(0x000a), enclosure_handle(0x0002)
start_phy(22), count(4)
[ 744.203306] phy(24), attached_handle(0x000d): target add: link
rate: new(0x0a), old(0x00)
[ 744.203307] mpt3sas_cm0: discovery event: (start)
[ 744.203308] mpt3sas_cm0: discovery event: (stop)
[ 744.251107] mpt3sas_cm0: sas topology change: (responding)
[ 744.251108] handle(0x000a), enclosure_handle(0x0002)
start_phy(19), count(1)
[ 744.251109] phy(19), attached_handle(0x000c): link rate change:
link rate: new(0x0a), old(0x0a)
[ 744.341838] mpt3sas_cm0: Discovery: (stop)
[ 744.352020] mpt3sas_cm0: Discovery: (stop)
[ 744.352029] mpt3sas_cm0: discovery event: (stop)
[ 744.372673] mpt3sas_cm0: discovery event: (stop)
[ 749.341800] mpt3sas_cm0: port enable: SUCCESS
[ 749.351973] mpt3sas_cm0: mpt3sas_scsih_reset_done_handler:
MPT3_IOC_DONE_RESET
[ 749.362528] mpt3sas_cm0: search for end-devices: start
[ 749.373009] scsi target6:0:1: handle(0x0009),
sas_addr(0x510600b00cf4d920)
[ 749.383183] scsi target6:0:1: enclosure logical
id(0x500605b00cf4d920), slot(8)
[ 749.393456] scsi target6:0:0: handle(0x000c),
sas_addr(0x500151b0000020b3)
[ 749.403422] scsi target6:0:0: enclosure logical
id(0x500151b0000020bf), slot(6)
[ 749.413603] handle changed from(0x000b)!!!
[ 749.423807] scsi target6:0:2: handle(0x000d),
sas_addr(0x500151b0000020bd)
[ 749.423808] scsi target6:0:2: enclosure logical
id(0x500151b0000020bf), slot(0)
[ 749.423809] handle changed from(0x000c)!!!
[ 749.423943] scsi target6:0:3: handle(0x000e),
sas_addr(0x500151b0000000bd)
[ 749.465449] scsi target6:0:3: enclosure logical
id(0x500151b0000000bf), slot(0)
[ 749.465725] mpt3sas_cm0: search for end-devices: complete
[ 749.486921] mpt3sas_cm0: search for end-devices: start
[ 749.486922] mpt3sas_cm0: search for PCIe end-devices: complete
[ 749.486922] mpt3sas_cm0: search for expanders: start
[ 749.487096] expander present: handle(0x000a),
sas_addr(0x500151b0000020bf)
[ 749.529574] expander present: handle(0x000b),
sas_addr(0x500151b0000000bf)
[ 749.529576] expander(0x500151b0000000bf): handle changed
from(0x000d) to (0x000b)!!!
[ 749.550862] mpt3sas_cm0: search for expanders: complete
[ 749.550865] mpt3sas_cm0: mpt3sas_ctl_reset_done_handler:
MPT3_IOC_DONE_RESET
[ 749.572504] mpt3sas_cm0: _base_reset_done_handler: MPT3_IOC_DONE_RESET
[ 749.572504] mpt3sas_cm0: mpt3sas_base_hard_reset_handler: SUCCESS
[ 749.572504] mpt3sas_cm0: mpt3sas_base_hard_reset_handler: exit
[ 750.571450] mpt3sas_cm0: removing unresponding devices: start
[ 750.582163] mpt3sas_cm0: removing unresponding devices: end-devices
[ 750.592829] mpt3sas_cm0: Removing unresponding devices: pcie end-devices
[ 750.603398] mpt3sas_cm0: removing unresponding devices: expanders
[ 750.603399] mpt3sas_cm0: removing unresponding devices: complete
[ 750.603400] mpt3sas_cm0: scan devices: start
[ 750.603402] mpt3sas_cm0: updating handles for
sas_host(0x500605b00cf4d920)
[ 750.604281] mpt3sas_cm0: scan devices: expanders start
[ 750.657941] mpt3sas_cm0: break from expander scan:
ioc_status(0x0022), loginfo(0x310f0400)
[ 750.668562] mpt3sas_cm0: scan devices: expanders complete
[ 750.668563] mpt3sas_cm0: scan devices: end devices start
[ 750.669734] mpt3sas_cm0: break from end device scan:
ioc_status(0x0022), loginfo(0x310f0400)
[ 750.700438] mpt3sas_cm0: scan devices: end devices complete
[ 750.700438] mpt3sas_cm0: scan devices: pcie end devices start
[ 750.700622] mpt3sas_cm0: break from pcie end device scan:
ioc_status(0x0022), loginfo(0x310f0400)
[ 750.733165] mpt3sas_cm0: pcie devices: pcie end devices complete
[ 750.733165] mpt3sas_cm0: scan devices: complete
[ 1349.589087] mpt3sas_cm0: _ctl_getiocinfo: enter
[ 1349.599693] mpt3sas_cm0: ctl_request: ioc_facts, smid(8581)
[ 1349.610279] mpt3sas_cm0: ctl_done: ioc_facts, smid(8581)
[ 1349.621158] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.632030] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.643149] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.654267] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.654273] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.676509] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.687607] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.698717] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.698745] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.720931] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.732030] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.732113] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.754756] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.754769] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.777577] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.788944] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.788956] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.811865] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.811870] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.834746] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.834752] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.857593] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.857830] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.880882] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.892582] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.892762] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.915881] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.916006] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.939646] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.939747] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.964020] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.976313] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1349.976319] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.000948] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.013324] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.013498] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.038226] mpt3sas_cm0: _ctl_btdh_mapping
[ 1350.038230] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.038327] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.075594] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.075700] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.100718] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.113312] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.113312] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 1350.113313] mpt3sas_cm0: sas_address(0x510600b00cf4d920), phy(8)
[ 1350.113313] mpt3sas_cm0:
enclosure_logical_id(0x500605b00cf4d920), slot(8)
[ 1350.113319] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.176544] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.176545] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 1350.176545] mpt3sas_cm0: sas_address(0x510600b00cf4d920), phy(8)
[ 1350.176546] mpt3sas_cm0:
enclosure_logical_id(0x500605b00cf4d920), slot(8)
[ 1350.176736] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.240290] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.253141] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.253175] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.279239] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.279255] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.305838] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.305871] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.332987] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.333006] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.360514] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.360537] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.388184] mpt3sas_cm0: _ctl_btdh_mapping
[ 1350.388191] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.415867] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.429843] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.429876] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.457925] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.582377] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.596261] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 1350.610261] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 1350.624299] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 1350.638408] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.652917] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.666946] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 1350.681004] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 1350.694993] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 1350.708973] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x25),
cdb_len(10), smid(8581)
[ 1350.722927] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x25), cdb_len(10),
smid(8581)
[ 1350.722928] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 1350.722929] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 1350.722931] mpt3sas_cm0: scsi_state(0x01), scsi_status(0x02)
[ 1350.778048] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x25),
cdb_len(10), smid(8581)
[ 1350.791785] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x25), cdb_len(10),
smid(8581)
[ 1350.791797] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.819361] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.832819] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 1350.846317] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 1350.859744] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 1350.873150] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.886902] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1350.900123] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 1350.913386] mpt3sas_cm0: sas_address(0x500151b0000020b3), phy(19)
[ 1350.926581] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(6)
[ 1350.939755] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.952985] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.952991] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.979419] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1350.979423] mpt3sas_cm0: _ctl_btdh_mapping
[ 1351.005697] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.018932] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.032153] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.032390] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.058593] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1351.058795] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1351.084874] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 1351.084875] mpt3sas_cm0: sas_address(0x500151b0000020bd), phy(24)
[ 1351.084875] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(0)
[ 1351.085051] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1351.136808] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1351.136810] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 1351.162366] mpt3sas_cm0: sas_address(0x500151b0000020bd), phy(24)
[ 1351.162366] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000020bf), slot(0)
[ 1351.162462] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.200510] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.200521] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.226028] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.226032] mpt3sas_cm0: _ctl_btdh_mapping
[ 1351.251614] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.251773] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.277592] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.290656] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.290666] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1351.317025] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1351.330076] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 1351.343164] mpt3sas_cm0: sas_address(0x500151b0000000bd), phy(24)
[ 1351.356179] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000000bf), slot(0)
[ 1351.369168] mpt3sas_cm0: ctl_request: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1351.382207] mpt3sas_cm0: ctl_done: scsi_io, cmd(0x12), cdb_len(6),
smid(8581)
[ 1351.395033] mpt3sas_cm0: iocstatus(0x0045), loginfo(0x00000000)
[ 1351.407880] mpt3sas_cm0: sas_address(0x500151b0000000bd), phy(24)
[ 1351.420659] mpt3sas_cm0:
enclosure_logical_id(0x500151b0000000bf), slot(0)
[ 1351.433421] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.446312] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.446323] mpt3sas_cm0: ctl_request: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.471850] mpt3sas_cm0: ctl_done: config, type(0x0f),
ext_type(0x12), number(0), smid(8581)
[ 1351.471851] mpt3sas_cm0: iocstatus(0x0022), loginfo(0x310f0400)
[ 1351.471861] mpt3sas_cm0: ctl_request: fw_upload, smid(8581)
[ 1351.510098] mpt3sas_cm0: ctl_done: fw_upload, smid(8581)
[ 1351.522571] mpt3sas_cm0: ctl_request: fw_upload, smid(8581)
[ 1351.534979] mpt3sas_cm0: ctl_done: fw_upload, smid(8581)
[ 1351.547306] mpt3sas_cm0: ctl_request: fw_upload, smid(8581)
[ 1412.364540] mpt3sas_cm0: Command Timeout
[ 1412.376607] mf:
[ 1412.376608] 12000002
[ 1412.400552] 00000000
[ 1412.412388] 00000000
[ 1412.412389] 00000000
[ 1412.412389] 00000000
[ 1412.412389] 000c0000
[ 1412.412390] 00000000
[ 1412.412390] 00010000
[ 1412.412391]
[ 1412.412391] 00010000
[ 1412.412392] mpt3sas_cm0: mpt3sas_base_hard_reset_handler: enter
[ 1412.412404] mpt3sas_cm0: mpt3sas_scsih_pre_reset_handler:
MPT3_IOC_PRE_RESET
[ 1412.554643] mpt3sas_cm0: mpt3sas_ctl_pre_reset_handler:
MPT3_IOC_PRE_RESET
[ 1412.554643] mpt3sas_cm0: _base_pre_reset_handler: MPT3_IOC_PRE_RESET
[ 1412.554648] mpt3sas_cm0: _base_make_ioc_ready
[ 1412.585784] mpt3sas_cm0: sending diag reset !!
[ 1413.342052] mpt3sas_cm0: diag reset: SUCCESS
[ 1413.352117] mpt3sas_cm0: mpt3sas_scsih_after_reset_handler:
MPT3_IOC_AFTER_RESET
[ 1413.362427] mpt3sas_cm0: completing 0 cmds
[ 1413.372560] mpt3sas_cm0: mpt3sas_ctl_after_reset_handler:
MPT3_IOC_AFTER_RESET
[ 1413.372560] mpt3sas_cm0: _base_after_reset_handler: MPT3_IOC_AFTER_RESET
[ 1413.372561] mpt3sas_cm0: _base_get_ioc_facts
[ 1413.372561] mpt3sas_cm0: _base_wait_for_iocstate
[ 1413.421070] offset:data
[ 1413.430822] [0x00]:03110206
[ 1413.440547] [0x04]:00002e00
[ 1413.450126] [0x08]:00000000
[ 1413.450126] [0x0c]:00000000
[ 1413.450126] [0x10]:00000000
[ 1413.450126] [0x14]:80010080
[ 1413.450127] [0x18]:22312200
[ 1413.450127] [0x1c]:000fa84c
[ 1413.450127] [0x20]:02000500
[ 1413.450127] [0x24]:00080020
[ 1413.450127] [0x28]:0280001d
[ 1413.450128] [0x2c]:00d100d0
[ 1413.450128] [0x30]:0074000b
[ 1413.450128] [0x34]:0020ffe0
[ 1413.450128] [0x38]:00800375
[ 1413.450129] [0x3c]:00000009
[ 1413.450129] [0x40]:00000000
[ 1413.450129] mpt3sas_cm0: CurrentHostPageSize is 0: Setting default
host page size to 4k
[ 1413.450130] mpt3sas_cm0: CurrentHostPageSize(0)
[ 1413.450130] mpt3sas_cm0: hba queue depth(8704), max chains per io(128)
[ 1413.450132] mpt3sas_cm0: request frame size(128), reply frame size(128)
[ 1413.450134] mpt3sas_cm0: _base_make_ioc_operational
[ 1413.451515] mpt3sas_cm0: _base_send_ioc_init
[ 1413.619995] offset:data
[ 1413.619995] [0x00]:02000004
[ 1413.619995] [0x04]:01000000
[ 1413.619995] [0x08]:00000000
[ 1413.619995] [0x0c]:36000206
[ 1413.619996] [0x10]:00000000
[ 1413.619996] [0x14]:200c0000
[ 1413.619996] [0x18]:00200000
[ 1413.619996] [0x1c]:22b44530
[ 1413.619997] [0x20]:0000000f
[ 1413.619997] [0x24]:0000000f
[ 1413.619997] [0x28]:dbe00000
[ 1413.619997] [0x2c]:0000000f
[ 1413.619997] [0x30]:e4a34000
[ 1413.619998] [0x34]:0000000f
[ 1413.619998] [0x38]:dc110000
[ 1413.619998] [0x3c]:0000000f
[ 1413.619999] [0x40]:a2654845
[ 1413.723893] [0x44]:00000174
[ 1413.767567] offset:data
[ 1413.771938] [0x00]:02050004
[ 1413.776386] [0x04]:01000000
[ 1413.780761] [0x08]:00000000
[ 1413.780761] [0x0c]:00000000
[ 1413.780762] [0x10]:00000000
[ 1413.780766] mpt3sas_cm0: _base_display_fwpkg_version
[ 1413.853103] mpt3sas_cm0: _base_display_fwpkg_version: complete
[ 1413.857397] mpt3sas_cm0: FW Package Version (02.00.05.02)
[ 1413.862145] mpt3sas_cm0: SAS3408: FWVersion(02.00.05.00),
ChipRevision(0x01), BiosVersion(09.03.00.00)
[ 1413.866838] NVMe
[ 1413.866839] mpt3sas_cm0: Protocol=(Initiator,Target),
Capabilities=(TLR,EEDP,Diag Trace Buffer,Task Set Full,NCQ)
[ 1413.871804] mpt3sas_cm0: _base_event_notification
[ 1413.882409] mpt3sas_cm0: _base_event_notification: complete
[ 1413.887845] mpt3sas_cm0: sending port enable !!
[ 1415.575003] mpt3sas_cm0: Discovery: (start)
[ 1415.580465] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 1415.580472] mpt3sas_cm0: discovery event: (start)
[ 1415.586146] mpt3sas_cm0: SAS Topology Change List
[ 1415.586147] mpt3sas_cm0: SAS Topology Change List
[ 1415.591875] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0001), enclosure logical
id(0x500605b00cf4d920) number slots(0)
[ 1415.597535] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 1415.597536] mpt3sas_cm0: SAS Topology Change List
[ 1415.597537] mpt3sas_cm0: SAS Topology Change List
[ 1415.631564] mpt3sas_cm0: sas topology change: (responding)
[ 1415.631564] handle(0x0000), enclosure_handle(0x0001)
start_phy(08), count(1)
[ 1415.631565] phy(08), attached_handle(0x0009): target add: link
rate: new(0x08), old(0x00)
[ 1415.631566] mpt3sas_cm0: sas topology change: (responding)
[ 1415.631566] handle(0x0000), enclosure_handle(0x0001)
start_phy(00), count(7)
[ 1415.631567] phy(00), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.631567] phy(02), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.631567] phy(04), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.631568] phy(06), attached_handle(0x000a): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.631569] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0002), enclosure logical
id(0x500151b0000020bf) number slots(0)
[ 1415.631570] mpt3sas_cm0: sas topology change: (add)
[ 1415.702281] handle(0x000a), enclosure_handle(0x0002)
start_phy(00), count(22)
[ 1415.702281] phy(06), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.702282] phy(07), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.702282] phy(08), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.702282] phy(09), attached_handle(0x0001): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.702283] phy(19), attached_handle(0x000b): target add: link
rate: new(0x0a), old(0x00)
[ 1415.702459] mpt3sas_cm0: sas topology change: (responding)
[ 1415.749775] handle(0x000a), enclosure_handle(0x0002)
start_phy(22), count(4)
[ 1415.749776] phy(24), attached_handle(0x000c): target add: link
rate: new(0x0a), old(0x00)
[ 1415.825009] mpt3sas_cm0: Discovery: (start)
[ 1415.832368] mpt3sas_cm0: SAS Topology Change List
[ 1415.832377] mpt3sas_cm0: discovery event: (start)
[ 1415.839903] mpt3sas_cm0: SAS Topology Change List
[ 1415.839905] mpt3sas_cm0: SAS Enclosure Device Status Change
[ 1415.839906] mpt3sas_cm0: SAS Topology Change List
[ 1415.847505] mpt3sas_cm0: sas topology change: (responding)
[ 1415.854990] mpt3sas_cm0: SAS Topology Change List
[ 1415.884646] handle(0x0000), enclosure_handle(0x0001)
start_phy(01), count(7)
[ 1415.884647] phy(01), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.884647] phy(02), attached_handle(0x000a): target responding:
link rate: new(0x0a), old(0x00)
[ 1415.884648] phy(03), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.884648] phy(04), attached_handle(0x000a): target responding:
link rate: new(0x0a), old(0x00)
[ 1415.884648] phy(05), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.884649] phy(06), attached_handle(0x000a): target responding:
link rate: new(0x0a), old(0x00)
[ 1415.884649] phy(07), attached_handle(0x000d): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.884659] mpt3sas_cm0: sas topology change: (responding)
[ 1415.957137] handle(0x000a), enclosure_handle(0x0002)
start_phy(19), count(1)
[ 1415.957138] phy(19), attached_handle(0x000b): link rate change:
link rate: new(0x0a), old(0x0a)
[ 1415.957146] mpt3sas_cm0: enclosure status change: (enclosure add)
handle(0x0003), enclosure logical
id(0x500151b0000000bf) number slots(0)
[ 1415.993356] mpt3sas_cm0: sas topology change: (add)
[ 1415.993356] handle(0x000d), enclosure_handle(0x0003)
start_phy(00), count(22)
[ 1415.993356] phy(06), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.993357] phy(07), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.993357] phy(08), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.993357] phy(09), attached_handle(0x0002): link rate change:
link rate: new(0x0a), old(0x00)
[ 1415.993358] mpt3sas_cm0: sas topology change: (responding)
[ 1415.993358] handle(0x000d), enclosure_handle(0x0003)
start_phy(22), count(4)
[ 1415.993359] phy(24), attached_handle(0x000e): target add: link
rate: new(0x0a), old(0x00)
[ 1416.075391] mpt3sas_cm0: Discovery: (stop)
[ 1416.092674] mpt3sas_cm0: Discovery: (stop)
[ 1416.092680] mpt3sas_cm0: discovery event: (stop)
[ 1416.113414] mpt3sas_cm0: discovery event: (stop)
[ 1421.074967] mpt3sas_cm0: port enable: SUCCESS
[ 1421.085240] mpt3sas_cm0: mpt3sas_scsih_reset_done_handler:
MPT3_IOC_DONE_RESET
[ 1421.095962] mpt3sas_cm0: search for end-devices: start
[ 1421.106693] scsi target6:0:1: handle(0x0009),
sas_addr(0x510600b00cf4d920)
[ 1421.117178] scsi target6:0:1: enclosure logical
id(0x500605b00cf4d920), slot(8)
[ 1421.127743] scsi target6:0:0: handle(0x000b),
sas_addr(0x500151b0000020b3)
[ 1421.138036] scsi target6:0:0: enclosure logical
id(0x500151b0000020bf), slot(6)
[ 1421.148310] handle changed from(0x000c)!!!
[ 1421.158705] scsi target6:0:2: handle(0x000c),
sas_addr(0x500151b0000020bd)
[ 1421.158707] scsi target6:0:2: enclosure logical
id(0x500151b0000020bf), slot(0)
[ 1421.179684] handle changed from(0x000d)!!!
[ 1421.179899] scsi target6:0:3: handle(0x000e),
sas_addr(0x500151b0000000bd)
[ 1421.200938] scsi target6:0:3: enclosure logical
id(0x500151b0000000bf), slot(0)
[ 1421.201162] mpt3sas_cm0: search for end-devices: complete
[ 1421.222637] mpt3sas_cm0: search for end-devices: start
[ 1421.222637] mpt3sas_cm0: search for PCIe end-devices: complete
[ 1421.222638] mpt3sas_cm0: search for expanders: start
[ 1421.222824] expander present: handle(0x000a),
sas_addr(0x500151b0000020bf)
[ 1421.265555] expander present: handle(0x000d),
sas_addr(0x500151b0000000bf)
[ 1421.265555] expander(0x500151b0000000bf): handle changed
from(0x000b) to (0x000d)!!!
[ 1421.265716] mpt3sas_cm0: search for expanders: complete
[ 1421.298001] mpt3sas_cm0: mpt3sas_ctl_reset_done_handler:
MPT3_IOC_DONE_RESET
[ 1421.298002] mpt3sas_cm0: _base_reset_done_handler: MPT3_IOC_DONE_RESET
[ 1421.298002] mpt3sas_cm0: mpt3sas_base_hard_reset_handler: SUCCESS
[ 1421.298002] mpt3sas_cm0: mpt3sas_base_hard_reset_handler: exit
[ 1421.298006] mpt3sas_cm0: removing unresponding devices: start
[ 1421.351365] mpt3sas_cm0: removing unresponding devices: end-devices
[ 1421.351365] mpt3sas_cm0: Removing unresponding devices: pcie end-devices
[ 1421.351366] mpt3sas_cm0: removing unresponding devices: expanders
[ 1421.351367] mpt3sas_cm0: removing unresponding devices: complete
[ 1421.351369] mpt3sas_cm0: scan devices: start
[ 1421.351370] mpt3sas_cm0: updating handles for
sas_host(0x500605b00cf4d920)
[ 1421.352148] mpt3sas_cm0: scan devices: expanders start
[ 1421.426208] mpt3sas_cm0: break from expander scan:
ioc_status(0x0022), loginfo(0x310f0400)
[ 1421.436492] mpt3sas_cm0: scan devices: expanders complete
[ 1421.446969] mpt3sas_cm0: scan devices: end devices start
[ 1421.458002] mpt3sas_cm0: break from end device scan:
ioc_status(0x0022), loginfo(0x310f0400)
[ 1421.468578] mpt3sas_cm0: scan devices: end devices complete
[ 1421.479147] mpt3sas_cm0: scan devices: pcie end devices start
[ 1421.479205] mpt3sas_cm0: break from pcie end device scan:
ioc_status(0x0022), loginfo(0x310f0400)
[ 1421.500178] mpt3sas_cm0: pcie devices: pcie end devices complete
[ 1421.500179] mpt3sas_cm0: scan devices: complete
