Re: [PATCH v1 1/2] scsi: dt-bindings: ufs: Add vcc-voltage-level for UFS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 15 Sep 16:47 UTC 2020, nguyenb@xxxxxxxxxxxxxx wrote:

> On 2020-09-15 06:43, Bjorn Andersson wrote:
> > On Tue 15 Sep 03:14 CDT 2020, nguyenb@xxxxxxxxxxxxxx wrote:
> > 
> > > On 2020-09-14 21:41, Bjorn Andersson wrote:
> > > > On Tue 01 Sep 01:00 CDT 2020, Bao D. Nguyen wrote:
> > > >
> > > > > UFS's specifications supports a range of Vcc operating
> > > > > voltage levels. Add documentation for the UFS's Vcc voltage
> > > > > levels setting.
> > > > >
> > > > > Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
> > > > > Signed-off-by: Asutosh Das <asutoshd@xxxxxxxxxxxxxx>
> > > > > Signed-off-by: Bao D. Nguyen <nguyenb@xxxxxxxxxxxxxx>
> > > > > ---
> > > > >  Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt | 2 ++
> > > > >  1 file changed, 2 insertions(+)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> > > > > b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> > > > > index 415ccdd..7257b32 100644
> > > > > --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> > > > > +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> > > > > @@ -23,6 +23,8 @@ Optional properties:
> > > > >                            with "phys" attribute, provides phandle
> > > > > to UFS PHY node
> > > > >  - vdd-hba-supply        : phandle to UFS host controller supply
> > > > > regulator node
> > > > >  - vcc-supply            : phandle to VCC supply regulator node
> > > > > +- vcc-voltage-level     : specifies voltage levels for VCC supply.
> > > > > +                          Should be specified in pairs (min, max),
> > > > > units uV.
> > > >
> > > > What exactly are these pairs representing?
> > > The pair is the min and max Vcc voltage request to the PMIC chip.
> > > As a result, the regulator output voltage would only be in this range.
> > > 
> > 
> > If you have static min/max voltage constraints for a device on a
> > particular board the right way to handle this is to adjust the board's
> > regulator-min-microvolt and regulator-max-microvolt accordingly - and
> > not call regulator_set_voltage() from the river at all.
> > 
> > In other words, you shouldn't add this new property to describe
> > something already described in the node vcc-supply points to.
> > 
> > Regards,
> > Bjorn
> Thank you all for your comments. The current driver hardcoding 2.7V Vcc min
> voltage
> does not work for UFS3.0+ devices according to the UFS device JEDEC spec.
> However, we will
> try to address it in a different way.
> 

Right, but what I'm saying is that you should remove the
regulator_set_voltage() call from the driver and rely on the device's
dts, in which case you won't have this problem.

Thanks,
Bjorn

> Regards,
> Bao
> 
> > 
> > > >
> > > > Is this supposed to be 3 pairs of (min,max) for vcc, vcc and vccq2 to be
> > > > passed into a regulator_set_voltage() for each regulator?
> > > Yes, that's right. I should include the other power supplies in this
> > > change
> > > as well.
> > > >
> > > > Or are these some sort of "operating points" for the vcc-supply?
> > > >
> > > > Regards,
> > > > Bjorn
> > > >
> > > > >  - vccq-supply           : phandle to VCCQ supply regulator node
> > > > >  - vccq2-supply          : phandle to VCCQ2 supply regulator node
> > > > >  - vcc-supply-1p8        : For embedded UFS devices, valid VCC range
> > > > > is 1.7-1.95V
> > > > > --
> > > > > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> > > > > Forum,
> > > > > a Linux Foundation Collaborative Project
> > > > >



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux