Re: [PATCH 22/28] sgiseeq: convert from dma_cache_sync to dma_sync_single_for_device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 03, 2020 at 10:43:02AM +0200, Christoph Hellwig wrote:
> On Tue, Sep 01, 2020 at 07:38:10PM +0200, Thomas Bogendoerfer wrote:
> > this is the problem:
> > 
> >        /* Always check for received packets. */
> >         sgiseeq_rx(dev, sp, hregs, sregs);
> > 
> > so the driver will look at the rx descriptor on every interrupt, so
> > we cache the rx descriptor on the first interrupt and if there was
> > $no rx packet, we will only see it, if cache line gets flushed for
> > some other reason.
> 
> That means a transfer back to device ownership is missing after a
> (negative) check.

E.g. something like this for the particular problem, although there
might be other hiding elsewhere:

diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c
index 8507ff2420143a..a1c7be8a0d1e5d 100644
--- a/drivers/net/ethernet/seeq/sgiseeq.c
+++ b/drivers/net/ethernet/seeq/sgiseeq.c
@@ -403,6 +403,8 @@ static inline void sgiseeq_rx(struct net_device *dev, struct sgiseeq_private *sp
 		rd = &sp->rx_desc[sp->rx_new];
 		dma_sync_desc_cpu(dev, rd);
 	}
+	dma_sync_desc_dev(dev, rd);
+
 	dma_sync_desc_cpu(dev, &sp->rx_desc[orig_end]);
 	sp->rx_desc[orig_end].rdma.cntinfo &= ~(HPCDMA_EOR);
 	dma_sync_desc_dev(dev, &sp->rx_desc[orig_end]);



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux