From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
- BIT_13 of extended FW attribute informs about NVMe-2 support.
- Set BIT_15 of specical feature control block for enabling SLER in FW.
- Set bit 8 (SLER supported) to 1 for the service parameter information
when sending NVMe PRLI request.
- Set BIT_14 of special feature control block for enabling
PI Control in FW.
- Driver should set bit 9 (PI Control supported) to 1 for the service
parameter information when sending NVMe PRLI request.
- Set BIT_13 for NVMe Async events.
Signed-off-by: Saurav Kashyap <skashyap@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_dbg.c | 2 +-
drivers/scsi/qla2xxx/qla_def.h | 4 ++++
drivers/scsi/qla2xxx/qla_iocb.c | 8 ++++++++
drivers/scsi/qla2xxx/qla_mbx.c | 21 +++++++++++++++++++--
drivers/scsi/qla2xxx/qla_nvme.c | 16 ++++++++++++++--
drivers/scsi/qla2xxx/qla_nvme.h | 1 +
drivers/scsi/qla2xxx/qla_os.c | 1 +
7 files changed, 48 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 1be811a5d69d..369040250ab9 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -16,7 +16,7 @@
* | Device Discovery | 0x2134 | 0x210e-0x2116 |
* | | | 0x211a |
* | | | 0x211c-0x2128 |
- * | | | 0x212a-0x2134 |
+ * | | | 0x212c-0x2134 |
* | Queue Command and IO tracing | 0x3074 | 0x300b |
* | | | 0x3027-0x3028 |
* | | | 0x303d-0x3041 |
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 863b9c7766e1..19b5c0e3dc99 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2476,6 +2476,8 @@ typedef struct fc_port {
struct completion nvme_del_done;
uint32_t nvme_prli_service_param;
+#define NVME_PRLI_SP_PI_CTRL BIT_9
+#define NVME_PRLI_SP_SLER BIT_8
#define NVME_PRLI_SP_CONF BIT_7
#define NVME_PRLI_SP_INITIATOR BIT_5
#define NVME_PRLI_SP_TARGET BIT_4
@@ -4308,6 +4310,7 @@ struct qla_hw_data {
#define FW_ATTR_EXT0_SCM_BROCADE 0x00001000
/* Cisco fabric attached */
#define FW_ATTR_EXT0_SCM_CISCO 0x00002000
+#define FW_ATTR_EXT0_NVME2 BIT_13
uint16_t fw_attributes_ext[2];
uint32_t fw_memory_size;
uint32_t fw_transfer_size;
@@ -4657,6 +4660,7 @@ typedef struct scsi_qla_host {
uint32_t qpairs_rsp_created:1;
uint32_t nvme_enabled:1;
uint32_t nvme_first_burst:1;
+ uint32_t nvme2_enabled:1;
} flags;
atomic_t loop_state;
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index b60a332e5846..a46f01a25582 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2378,6 +2378,14 @@ qla24xx_prli_iocb(srb_t *sp, struct logio_entry_24xx *logio)
if (sp->vha->flags.nvme_first_burst)
logio->io_parameter[0] =
cpu_to_le32(NVME_PRLI_SP_FIRST_BURST);
+ if (sp->vha->flags.nvme2_enabled) {
+ /* Set service parameter BIT_8 for SLER support */
+ logio->io_parameter[0] |=
+ cpu_to_le32(NVME_PRLI_SP_SLER);
+ /* Set service parameter BIT_9 for PI control support */
+ logio->io_parameter[0] |=
+ cpu_to_le32(NVME_PRLI_SP_PI_CTRL);
+ }
}
logio->nport_handle = cpu_to_le16(sp->fcport->loop_id);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index ab7dbbc99c22..e5a47d5147fc 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1093,6 +1093,17 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha)
"%s: FC-NVMe is Enabled (0x%x)\n",
__func__, ha->fw_attributes_h);
}
+
+ /* BIT_13 of Extended FW Attributes informs about NVMe2 support */
+ if (ha->fw_attributes_ext[0] & FW_ATTR_EXT0_NVME2) {
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1191,
+ "%s: Firmware supports NVMe2 0x%x\n",
+ __func__, ha->fw_attributes_ext[0]);
+ ql_log(ql_log_info, vha, 0xd302,
+ "Firmware supports NVMe2 0x%x\n",
+ ha->fw_attributes_ext[0]);
+ vha->flags.nvme2_enabled = 1;
+ }
}
if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
@@ -1122,12 +1133,18 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha)
if (ha->flags.scm_supported_a &&
(ha->fw_attributes_ext[0] & FW_ATTR_EXT0_SCM_SUPPORTED)) {
ha->flags.scm_supported_f = 1;
- memset(ha->sf_init_cb, 0, sizeof(struct init_sf_cb));
ha->sf_init_cb->flags |= BIT_13;
}
ql_log(ql_log_info, vha, 0x11a3, "SCM in FW: %s\n",
(ha->flags.scm_supported_f) ? "Supported" :
"Not Supported");
+
+ if (vha->flags.nvme2_enabled) {
+ /* set BIT_15 of special feature control block for SLER */
+ ha->sf_init_cb->flags |= BIT_15;
+ /* set BIT_14 of special feature control block for PI CTRL*/
+ ha->sf_init_cb->flags |= BIT_14;
+ }
}
failed:
@@ -1823,7 +1840,7 @@ qla2x00_init_firmware(scsi_qla_host_t *vha, uint16_t size)
mcp->out_mb |= MBX_14|MBX_13|MBX_12|MBX_11|MBX_10;
}
- if (ha->flags.scm_supported_f) {
+ if (ha->flags.scm_supported_f || vha->flags.nvme2_enabled) {
mcp->mb[1] |= BIT_1;
mcp->mb[16] = MSW(ha->sf_init_cb_dma);
mcp->mb[17] = LSW(ha->sf_init_cb_dma);
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index 675f2b1180e8..0d73c285a4d1 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -69,6 +69,14 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
return ret;
}
+ if (fcport->nvme_prli_service_param & NVME_PRLI_SP_SLER)
+ ql_log(ql_log_info, vha, 0x212a,
+ "PortID:%06x Supports SLER\n", req.port_id);
+
+ if (fcport->nvme_prli_service_param & NVME_PRLI_SP_PI_CTRL)
+ ql_log(ql_log_info, vha, 0x212b,
+ "PortID:%06x Supports PI control\n", req.port_id);
+
rport = fcport->nvme_remote_port->private;
rport->fcport = fcport;
@@ -368,6 +376,7 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
struct srb_iocb *nvme = &sp->u.iocb_cmd;
struct scatterlist *sgl, *sg;
struct nvmefc_fcp_req *fd = nvme->u.nvme.desc;
+ struct nvme_fc_cmd_iu *cmd = fd->cmdaddr;
uint32_t rval = QLA_SUCCESS;
/* Setup qpair pointers */
@@ -399,8 +408,6 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
}
if (unlikely(!fd->sqid)) {
- struct nvme_fc_cmd_iu *cmd = fd->cmdaddr;
-
if (cmd->sqe.common.opcode == nvme_admin_async_event) {
nvme->u.nvme.aen_op = 1;
atomic_inc(&ha->nvme_active_aen_cnt);
@@ -446,6 +453,11 @@ static inline int qla2x00_start_nvme_mq(srb_t *sp)
} else if (fd->io_dir == 0) {
cmd_pkt->control_flags = 0;
}
+ /* Set BIT_13 of control flags for Async event */
+ if (vha->flags.nvme2_enabled &&
+ cmd->sqe.common.opcode == nvme_admin_async_event) {
+ cmd_pkt->control_flags |= cpu_to_le16(CF_ADMIN_ASYNC_EVENT);
+ }
/* Set NPORT-ID */
cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id);
diff --git a/drivers/scsi/qla2xxx/qla_nvme.h b/drivers/scsi/qla2xxx/qla_nvme.h
index cf45a5b277f1..5d5f115a77c3 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.h
+++ b/drivers/scsi/qla2xxx/qla_nvme.h
@@ -54,6 +54,7 @@ struct cmd_nvme {
uint64_t rsvd;
__le16 control_flags; /* Control Flags */
+#define CF_ADMIN_ASYNC_EVENT BIT_13
#define CF_NVME_FIRST_BURST_ENABLE BIT_11
#define CF_DIF_SEG_DESCR_ENABLE BIT_3
#define CF_DATA_SEG_DESCR_ENABLE BIT_2
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index a4d737b92ec1..a186c3a55088 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -4231,6 +4231,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
&ha->sf_init_cb_dma);
if (!ha->sf_init_cb)
goto fail_sf_init_cb;
+ memset(ha->sf_init_cb, 0, sizeof(struct init_sf_cb));
ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0199,
"sf_init_cb=%p.\n", ha->sf_init_cb);
}
--
2.19.0.rc0
