From: Hannes Reinecke <hare@xxxxxxx> The smart array HBAs can steer interrupt completion, so this patch switches the implementation to use multiqueue and enables 'host_tagset' as the HBA has a shared host-wide tagset. Reviewed-by: Don Brace <don.brace@xxxxxxxxxxxxx> Signed-off-by: Hannes Reinecke <hare@xxxxxxx> Signed-off-by: John Garry <john.garry@xxxxxxxxxx> --- drivers/scsi/hpsa.c | 44 +++++++------------------------------------- drivers/scsi/hpsa.h | 1 - 2 files changed, 7 insertions(+), 38 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 91794a50b31f..eaddcd3e9caf 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -984,6 +984,7 @@ static struct scsi_host_template hpsa_driver_template = { .shost_attrs = hpsa_shost_attrs, .max_sectors = 2048, .no_write_same = 1, + .host_tagset = 1, }; static inline u32 next_command(struct ctlr_info *h, u8 q) @@ -1148,12 +1149,14 @@ static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h, static void __enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c, int reply_queue) { + u32 blk_tag = blk_mq_unique_tag(c->scsi_cmd->request); + dial_down_lockup_detection_during_fw_flash(h, c); atomic_inc(&h->commands_outstanding); if (c->device) atomic_inc(&c->device->commands_outstanding); - reply_queue = h->reply_map[raw_smp_processor_id()]; + reply_queue = blk_mq_unique_tag_to_hwq(blk_tag); switch (c->cmd_type) { case CMD_IOACCEL1: set_ioaccel1_performant_mode(h, c, reply_queue); @@ -5676,8 +5679,6 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) /* Get the ptr to our adapter structure out of cmd->host. */ h = sdev_to_hba(cmd->device); - BUG_ON(cmd->request->tag < 0); - dev = cmd->device->hostdata; if (!dev) { cmd->result = DID_NO_CONNECT << 16; @@ -5853,7 +5854,7 @@ static int hpsa_scsi_host_alloc(struct ctlr_info *h) sh->hostdata[0] = (unsigned long) h; sh->irq = pci_irq_vector(h->pdev, 0); sh->unique_id = sh->irq; - + sh->nr_hw_queues = h->msix_vectors > 0 ? h->msix_vectors : 1; h->scsi_host = sh; return 0; } @@ -5879,7 +5880,8 @@ static int hpsa_scsi_add_host(struct ctlr_info *h) */ static int hpsa_get_cmd_index(struct scsi_cmnd *scmd) { - int idx = scmd->request->tag; + u32 blk_tag = blk_mq_unique_tag(scmd->request); + int idx = blk_mq_unique_tag_to_tag(blk_tag); if (idx < 0) return idx; @@ -7456,26 +7458,6 @@ static void hpsa_disable_interrupt_mode(struct ctlr_info *h) h->msix_vectors = 0; } -static void hpsa_setup_reply_map(struct ctlr_info *h) -{ - const struct cpumask *mask; - unsigned int queue, cpu; - - for (queue = 0; queue < h->msix_vectors; queue++) { - mask = pci_irq_get_affinity(h->pdev, queue); - if (!mask) - goto fallback; - - for_each_cpu(cpu, mask) - h->reply_map[cpu] = queue; - } - return; - -fallback: - for_each_possible_cpu(cpu) - h->reply_map[cpu] = 0; -} - /* If MSI/MSI-X is supported by the kernel we will try to enable it on * controllers that are capable. If not, we use legacy INTx mode. */ @@ -7872,9 +7854,6 @@ static int hpsa_pci_init(struct ctlr_info *h) if (err) goto clean1; - /* setup mapping between CPU and reply queue */ - hpsa_setup_reply_map(h); - err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr); if (err) goto clean2; /* intmode+region, pci */ @@ -8613,7 +8592,6 @@ static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h, static void hpda_free_ctlr_info(struct ctlr_info *h) { - kfree(h->reply_map); kfree(h); } @@ -8622,14 +8600,6 @@ static struct ctlr_info *hpda_alloc_ctlr_info(void) struct ctlr_info *h; h = kzalloc(sizeof(*h), GFP_KERNEL); - if (!h) - return NULL; - - h->reply_map = kcalloc(nr_cpu_ids, sizeof(*h->reply_map), GFP_KERNEL); - if (!h->reply_map) { - kfree(h); - return NULL; - } return h; } diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 6b87d9815b35..9c6a161f2367 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -161,7 +161,6 @@ struct bmic_controller_parameters { #pragma pack() struct ctlr_info { - unsigned int *reply_map; int ctlr; char devname[8]; char *product_name; -- 2.26.2