From: Arun Easi <aeasi@xxxxxxxxxxx> Driver was using a lower value for dev_loss_tmo making it more prone to I/O failures during remote port toggle testing. Set dev_loss_tmo to zero during remote port registration to allow nvme-fc default dev_loss_tmo to be used, which is higher than what driver was using. Signed-off-by: Arun Easi <aeasi@xxxxxxxxxxx> Signed-off-by: Himanshu Madhani <hmadhani@xxxxxxxxxxx> Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx> --- drivers/scsi/qla2xxx/qla_nvme.c | 2 +- drivers/scsi/qla2xxx/qla_nvme.h | 3 --- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c index 90bbc61f361b..435f17f87301 100644 --- a/drivers/scsi/qla2xxx/qla_nvme.c +++ b/drivers/scsi/qla2xxx/qla_nvme.c @@ -42,7 +42,7 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport) req.port_name = wwn_to_u64(fcport->port_name); req.node_name = wwn_to_u64(fcport->node_name); req.port_role = 0; - req.dev_loss_tmo = NVME_FC_DEV_LOSS_TMO; + req.dev_loss_tmo = 0; if (fcport->nvme_prli_service_param & NVME_PRLI_SP_INITIATOR) req.port_role = FC_PORT_ROLE_NVME_INITIATOR; diff --git a/drivers/scsi/qla2xxx/qla_nvme.h b/drivers/scsi/qla2xxx/qla_nvme.h index fbb844226630..cf45a5b277f1 100644 --- a/drivers/scsi/qla2xxx/qla_nvme.h +++ b/drivers/scsi/qla2xxx/qla_nvme.h @@ -14,9 +14,6 @@ #include "qla_def.h" #include "qla_dsd.h" -/* default dev loss time (seconds) before transport tears down ctrl */ -#define NVME_FC_DEV_LOSS_TMO 30 - #define NVME_ATIO_CMD_OFF 32 #define NVME_FIRST_PACKET_CMDLEN (64 - NVME_ATIO_CMD_OFF) #define Q2T_NVME_NUM_TAGS 2048 -- 2.19.0.rc0
