>
> Please check Stanley's recent change to ufshcd_abort, you may
> want to rebase your change on his and do goto cleanup here.
> @Stanley correct me if I am wrong.
>
> But even if you do a goto cleanup here, we still lost the
> chances to dump host infos/regs like it does in the old code.
> If a cmd was completed but without a notifying intr, this is
> kind of a problem that we/host should look into, because it's
> pasted at least 30 sec since the cmd was sent, so those dumps
> are necessary to debug the problem. How about moving blow prints
> in front of this part?
>
> Thanks,
>
> Can Guo.
>
> > }
> >
> > /* Print Transfer Request of aborted task */
Hi Can
Thanks, do you mean that change to like this:
Author: Bean Huo <beanhuo@xxxxxxxxxx>
Date: Thu Aug 6 11:34:45 2020 +0200
scsi: ufs: no need to send one Abort Task TM in case the task in
was cleared
If the bit corresponds to a task in the Doorbell register has been
cleared, no need to poll the status of the task on the device side
and to send an Abort Task TM.
This patch also deletes dispensable dev_err() in case of the task
already completed.
Signed-off-by: Bean Huo <beanhuo@xxxxxxxxxx>
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 307622284239..f7c91ce9e294 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6425,23 +6425,9 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
return ufshcd_eh_host_reset_handler(cmd);
ufshcd_hold(hba, false);
- reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
/* If command is already aborted/completed, return SUCCESS */
- if (!(test_bit(tag, &hba->outstanding_reqs))) {
- dev_err(hba->dev,
- "%s: cmd at tag %d already completed,
outstanding=0x%lx, doorbell=0x%x\n",
- __func__, tag, hba->outstanding_reqs, reg);
+ if (!(test_bit(tag, &hba->outstanding_reqs)))
goto out;
- }
-
- if (!(reg & (1 << tag))) {
- dev_err(hba->dev,
- "%s: cmd was completed, but without a notifying intr,
tag = %d",
- __func__, tag);
- }
-
- /* Print Transfer Request of aborted task */
- dev_err(hba->dev, "%s: Device abort task at tag %d\n",
__func__, tag);
/*
* Print detailed info about aborted request.
@@ -6462,6 +6448,17 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
}
hba->req_abort_count++;
+ reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
+ if (!(reg & (1 << tag))) {
+ dev_err(hba->dev,
+ "%s: cmd was completed, but without a notifying intr,
tag = %d",
+ __func__, tag);
+ goto cleanup;
+ }
+
+ /* Print Transfer Request of aborted task */
+ dev_err(hba->dev, "%s: Device abort task at tag %d\n",
__func__, tag);
+
/* Skip task abort in case previous aborts failed and report
failure */
if (lrbp->req_abort_skip) {
err = -EIO;
@@ -6526,6 +6523,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
goto out;
}
+cleanup:
scsi_dma_unmap(cmd);
spin_lock_irqsave(host->host_lock, flags);
Author: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
Date: Thu Aug 6 11:48:00 2020 +0200
scsi: ufs: Cleanup completed request without interrupt notification
If somehow no interrupt notification is raised for a completed
request
and its doorbell bit is cleared by host, UFS driver needs to
cleanup
its outstanding bit in ufshcd_abort(). Otherwise, system may behave
abnormally by below flow:
After ufshcd_abort() returns, this request will be requeued by SCSI
layer with its outstanding bit set. Any future completed request
will trigger ufshcd_transfer_req_compl() to handle all "completed
outstanding bits". In this time, the "abnormal outstanding bit"
will be detected and the "requeued request" will be chosen to
execute
request post-processing flow. This is wrong because this request is
still "alive".
Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index f7c91ce9e294..29d5e5e5d0e0 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6489,7 +6489,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
/* command completed already */
dev_err(hba->dev, "%s: cmd at tag %d
successfully cleared from DB.\n",
__func__, tag);
- goto out;
+ goto cleanup;
} else {
dev_err(hba->dev,
"%s: no response from device. tag = %d,
err %d\n",
