[PATCH] scsi: qla2xxx: use MBX_TOV_SECONDS for mailbox command timeout values

[Enzo Matsumiya <ematsumiya@xxxxxxx>]

Improves readability of qla_mbx.c

Signed-off-by: Enzo Matsumiya <ematsumiya@xxxxxxx>
---
 drivers/scsi/qla2xxx/qla_mbx.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index df31ee0d59b2..b99eed55eb4a 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -5190,7 +5190,7 @@ qla2x00_read_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t *data)
 	mcp->mb[8] = MSW(risc_addr);
 	mcp->out_mb = MBX_8|MBX_1|MBX_0;
 	mcp->in_mb = MBX_3|MBX_2|MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 	if (rval != QLA_SUCCESS) {
@@ -5378,7 +5378,7 @@ qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data)
 	mcp->mb[8] = MSW(risc_addr);
 	mcp->out_mb = MBX_8|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_1|MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 	if (rval != QLA_SUCCESS) {
@@ -5650,7 +5650,7 @@ qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
 	mcp->mb[9] = vha->vp_idx;
 	mcp->out_mb = MBX_9|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_4|MBX_3|MBX_1|MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 	if (mb != NULL) {
@@ -5737,7 +5737,7 @@ qla82xx_mbx_intr_enable(scsi_qla_host_t *vha)
 
 	mcp->out_mb = MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -5772,7 +5772,7 @@ qla82xx_mbx_intr_disable(scsi_qla_host_t *vha)
 
 	mcp->out_mb = MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -5964,7 +5964,7 @@ qla81xx_set_led_config(scsi_qla_host_t *vha, uint16_t *led_cfg)
 	if (IS_QLA8031(ha))
 		mcp->out_mb |= MBX_6|MBX_5|MBX_4|MBX_3;
 	mcp->in_mb = MBX_0;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -6000,7 +6000,7 @@ qla81xx_get_led_config(scsi_qla_host_t *vha, uint16_t *led_cfg)
 	mcp->in_mb = MBX_2|MBX_1|MBX_0;
 	if (IS_QLA8031(ha))
 		mcp->in_mb |= MBX_6|MBX_5|MBX_4|MBX_3;
-	mcp->tov = 30;
+	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 
 	rval = qla2x00_mailbox_command(vha, mcp);
-- 
2.28.0