Current Link speed was shown as "unknown" in sysfs for FCoE ports
In this scenario, the port was working in 20G speed, which happens to
not be a speed handled by the driver.
Add support for all possible link speeds that could get reported from
port_speed field in link state ACQE.
Additionally, as supported_speeds can't be manipulated via the fcoe driver
on a converged ethernet port (it must be managed by the nic function),
don't fill out the supported_speeds field for the fc host object in sysfs.
Revise debug logging to report Link speed mgmt valuess.
Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_attr.c | 6 ++++++
drivers/scsi/lpfc/lpfc_init.c | 15 +++++++++++++--
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index a62c60ca6477..cc2c907777d2 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -6679,9 +6679,15 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
}
} else if (lpfc_is_link_up(phba) && (phba->hba_flag & HBA_FCOE_MODE)) {
switch (phba->fc_linkspeed) {
+ case LPFC_ASYNC_LINK_SPEED_1GBPS:
+ fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
+ break;
case LPFC_ASYNC_LINK_SPEED_10GBPS:
fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
break;
+ case LPFC_ASYNC_LINK_SPEED_20GBPS:
+ fc_host_speed(shost) = FC_PORTSPEED_20GBIT;
+ break;
case LPFC_ASYNC_LINK_SPEED_25GBPS:
fc_host_speed(shost) = FC_PORTSPEED_25GBIT;
break;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index db768e28d3f9..159afadaea2b 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4577,6 +4577,13 @@ static void lpfc_host_supported_speeds_set(struct Scsi_Host *shost)
struct lpfc_hba *phba = vport->phba;
fc_host_supported_speeds(shost) = 0;
+ /*
+ * Avoid reporting supported link speed for FCoE as it can't be
+ * controlled via FCoE.
+ */
+ if (phba->hba_flag & HBA_FCOE_MODE)
+ return;
+
if (phba->lmt & LMT_128Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_128GBIT;
if (phba->lmt & LMT_64Gb)
@@ -4910,6 +4917,9 @@ lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,
case LPFC_ASYNC_LINK_SPEED_40GBPS:
port_speed = 40000;
break;
+ case LPFC_ASYNC_LINK_SPEED_100GBPS:
+ port_speed = 100000;
+ break;
default:
port_speed = 0;
}
@@ -8589,7 +8599,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
"VPI(B:%d M:%d) "
"VFI(B:%d M:%d) "
"RPI(B:%d M:%d) "
- "FCFI:%d EQ:%d CQ:%d WQ:%d RQ:%d\n",
+ "FCFI:%d EQ:%d CQ:%d WQ:%d RQ:%d lmt:x%x\n",
phba->sli4_hba.extents_in_use,
phba->sli4_hba.max_cfg_param.xri_base,
phba->sli4_hba.max_cfg_param.max_xri,
@@ -8603,7 +8613,8 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
phba->sli4_hba.max_cfg_param.max_eq,
phba->sli4_hba.max_cfg_param.max_cq,
phba->sli4_hba.max_cfg_param.max_wq,
- phba->sli4_hba.max_cfg_param.max_rq);
+ phba->sli4_hba.max_cfg_param.max_rq,
+ phba->lmt);
/*
* Calculate queue resources based on how
--
2.26.2
