[PATCH] scsi: esas2r: fix possible buffer overflow caused by bad DMA value in esas2r_process_fs_ioctl()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In esas2r_read_fs():
  struct esas2r_ioctl_fs *fs = 
         (struct esas2r_ioctl_fs *)a->fs_api_buffer;

Because "a->fs_api_buffer" is mapped to coherent DMA (allocated in
esas2r_write_fs()), "fs" is also mapped to DMA.

Then esas2r_read_fs() calls esas2r_process_fs_ioctl() with "fs".

In esas2r_process_fs_ioctl():
  fsc = &fs->command;
  ...
  if (fsc->command >= cmdcnt) {
    fs->status = ATTO_STS_INV_FUNC;
    return false;
  }
  func = cmd_to_fls_func[fsc->command];
  if (func == 0xFF) {
    fs->status = ATTO_STS_INV_FUNC;
    return false;
  }

Because "fs" is mapped to DMA, its data can be modified at anytime by
malicious or malfunctioning hardware. In this case, the check 
"if (fsc->command >= cmdcnt)" can be passed, and then "fsc->command" 
can be modified by hardware to cause buffer overflow.

To fix this problem, "fsc->command" is assigned to a local variable, and
then this local variable is used to replace "fsc->command".

Signed-off-by: Jia-Ju Bai <baijiaju@xxxxxxxxxxxxxxx>
---
 drivers/scsi/esas2r/esas2r_flash.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/esas2r/esas2r_flash.c b/drivers/scsi/esas2r/esas2r_flash.c
index b02ac389e6c6..ca5ff0d4c7d0 100644
--- a/drivers/scsi/esas2r/esas2r_flash.c
+++ b/drivers/scsi/esas2r/esas2r_flash.c
@@ -851,6 +851,7 @@ bool esas2r_process_fs_ioctl(struct esas2r_adapter *a,
 	struct esas2r_ioctlfs_command *fsc = &fs->command;
 	u8 func = 0;
 	u32 datalen;
+	u8 command = fsc->command;
 
 	fs->status = ATTO_STS_FAILED;
 	fs->driver_error = RS_PENDING;
@@ -860,18 +861,18 @@ bool esas2r_process_fs_ioctl(struct esas2r_adapter *a,
 		return false;
 	}
 
-	if (fsc->command >= cmdcnt) {
+	if (command >= cmdcnt) {
 		fs->status = ATTO_STS_INV_FUNC;
 		return false;
 	}
 
-	func = cmd_to_fls_func[fsc->command];
+	func = cmd_to_fls_func[command];
 	if (func == 0xFF) {
 		fs->status = ATTO_STS_INV_FUNC;
 		return false;
 	}
 
-	if (fsc->command != ESAS2R_FS_CMD_CANCEL) {
+	if (command != ESAS2R_FS_CMD_CANCEL) {
 		if ((a->pcid->device != ATTO_DID_MV_88RC9580
 		     || fs->adap_type != ESAS2R_FS_AT_ESASRAID2)
 		    && (a->pcid->device != ATTO_DID_MV_88RC9580TS
-- 
2.17.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux