[PATCH 3/4] hpsa: increase ctlr eh timeout

[Don Brace <don.brace@xxxxxxxxxxxxx>]

Increase the timeout value for commands sent to
the controller device.

- controller can become slow to respond to INQUIRIES
  resulting in the SML off-lining the controller
  device.
- when large RAID volumes are created along with
  I/O stress, the controller can be slow to respond
  to INQUIRIES.
  - set/sense config along with device resets
    can delay controller responses.

Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
 drivers/scsi/hpsa.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 9b1edc541ed0..9286e60b8cc4 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2134,6 +2134,7 @@ static int hpsa_slave_alloc(struct scsi_device *sdev)
 }
 
 /* configure scsi device based on internal per-device structure */
+#define CTLR_TIMEOUT (120 * HZ)
 static int hpsa_slave_configure(struct scsi_device *sdev)
 {
 	struct hpsa_scsi_dev_t *sd;
@@ -2144,17 +2145,21 @@ static int hpsa_slave_configure(struct scsi_device *sdev)
 
 	if (sd) {
 		sd->was_removed = 0;
+		queue_depth = sd->queue_depth != 0 ?
+				sd->queue_depth : sdev->host->can_queue;
 		if (sd->external) {
 			queue_depth = EXTERNAL_QD;
 			sdev->eh_timeout = HPSA_EH_PTRAID_TIMEOUT;
 			blk_queue_rq_timeout(sdev->request_queue,
 						HPSA_EH_PTRAID_TIMEOUT);
-		} else {
-			queue_depth = sd->queue_depth != 0 ?
-					sd->queue_depth : sdev->host->can_queue;
 		}
-	} else
+		if (is_hba_lunid(sd->scsi3addr)) {
+			sdev->eh_timeout = CTLR_TIMEOUT;
+			blk_queue_rq_timeout(sdev->request_queue, CTLR_TIMEOUT);
+		}
+	} else {
 		queue_depth = sdev->host->can_queue;
+	}
 
 	scsi_change_queue_depth(sdev, queue_depth);