The SCSI REQUEST SENSE command emulation was found to be broken.
It is a quite complex command so try and make it do a subset of
what it should do. Remove the attempt to mimic SCSI-1 REQUEST
SENSE (i.e. return the sense data for the previous failed
command). Add some reporting of "pollable" sense data [see
spc6r02: 5.12.2]. Keep the IEC mode page MRIE=6 TEST=1
predictive failure reporting.
Signed-off-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
---
drivers/scsi/scsi_debug.c | 64 ++++++++++++++++++---------------------
1 file changed, 29 insertions(+), 35 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 50b29b898db8..074d58dc8b5c 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1713,68 +1713,62 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
return ret;
}
+/* See resp_iec_m_pg() for how this data is manipulated */
static unsigned char iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0,
0, 0, 0x0, 0x0};
static int resp_requests(struct scsi_cmnd *scp,
struct sdebug_dev_info *devip)
{
- unsigned char *sbuff;
unsigned char *cmd = scp->cmnd;
- unsigned char arr[SCSI_SENSE_BUFFERSIZE];
- bool dsense;
+ unsigned char arr[SCSI_SENSE_BUFFERSIZE]; /* assume >= 18 bytes */
+ bool dsense = !!(cmd[1] & 1);
+ int alloc_len = cmd[4];
int len = 18;
+ int stopped_state = atomic_read(&devip->stopped);
memset(arr, 0, sizeof(arr));
- dsense = !!(cmd[1] & 1);
- sbuff = scp->sense_buffer;
- if ((iec_m_pg[2] & 0x4) && (6 == (iec_m_pg[3] & 0xf))) {
+ if (stopped_state > 0) { /* some "pollable" data [spc6r02: 5.12.2] */
+ if (dsense) {
+ arr[0] = 0x72;
+ arr[1] = NOT_READY;
+ arr[2] = LOGICAL_UNIT_NOT_READY;
+ arr[3] = (stopped_state == 2) ? 0x1 : 0x2;
+ len = 8;
+ } else {
+ arr[0] = 0x70;
+ arr[2] = NOT_READY; /* NO_SENSE in sense_key */
+ arr[7] = 0xa; /* 18 byte sense buffer */
+ arr[12] = LOGICAL_UNIT_NOT_READY;
+ arr[13] = (stopped_state == 2) ? 0x1 : 0x2;
+ }
+ } else if ((iec_m_pg[2] & 0x4) && (6 == (iec_m_pg[3] & 0xf))) {
+ /* Information exceptions control mode page: TEST=1, MRIE=6 */
if (dsense) {
arr[0] = 0x72;
arr[1] = 0x0; /* NO_SENSE in sense_key */
arr[2] = THRESHOLD_EXCEEDED;
- arr[3] = 0xff; /* TEST set and MRIE==6 */
+ arr[3] = 0xff; /* Failure prediction(false) */
len = 8;
} else {
arr[0] = 0x70;
arr[2] = 0x0; /* NO_SENSE in sense_key */
arr[7] = 0xa; /* 18 byte sense buffer */
arr[12] = THRESHOLD_EXCEEDED;
- arr[13] = 0xff; /* TEST set and MRIE==6 */
+ arr[13] = 0xff; /* Failure prediction(false) */
}
- } else {
- memcpy(arr, sbuff, SCSI_SENSE_BUFFERSIZE);
- if (arr[0] >= 0x70 && dsense == sdebug_dsense)
- ; /* have sense and formats match */
- else if (arr[0] <= 0x70) {
- if (dsense) {
- memset(arr, 0, 8);
- arr[0] = 0x72;
- len = 8;
- } else {
- memset(arr, 0, 18);
- arr[0] = 0x70;
- arr[7] = 0xa;
- }
- } else if (dsense) {
- memset(arr, 0, 8);
- arr[0] = 0x72;
- arr[1] = sbuff[2]; /* sense key */
- arr[2] = sbuff[12]; /* asc */
- arr[3] = sbuff[13]; /* ascq */
+ } else { /* nothing to report */
+ if (dsense) {
len = 8;
+ memset(arr, 0, len);
+ arr[0] = 0x72;
} else {
- memset(arr, 0, 18);
+ memset(arr, 0, len);
arr[0] = 0x70;
- arr[2] = sbuff[1];
arr[7] = 0xa;
- arr[12] = sbuff[1];
- arr[13] = sbuff[3];
}
-
}
- mk_sense_buffer(scp, 0, NO_ADDITIONAL_SENSE, 0);
- return fill_from_dev_buffer(scp, arr, len);
+ return fill_from_dev_buffer(scp, arr, min_t(int, len, alloc_len));
}
static int resp_start_stop(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
--
2.25.1
