[PATCH v1 0/2] scsi: libsas: An improvement on error handle and tidy-up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch introduces an improvement to reduce error handle time and a
tidy-up, including: 
- postreset() is deleted from sas_sata_ops. 
- Do not perform hard reset and delayed retry on a removed SATA disk. This
can effectively reduce the error handle duration of hot unplug a SATA disk
with traffic(reduce about 30s depending on the delay setting of libata). 

Both John garry and Jason Yan participated in the review of the solution
and provided good suggestions during the development. 

Luo Jiaxing (2):
  {topost} scsi: libsas: delete postreset at sas_sata_ops
  {topost} scsi: libsas: check link status at ATA prereset() ops

 drivers/scsi/libsas/sas_ata.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

-- 
2.7.4




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux