Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm80xx_hwi.c:918: warning: Function parameter or member 'number' not described in 'update_inbnd_queue_table' drivers/scsi/pm8001/pm80xx_hwi.c:954: warning: Function parameter or member 'number' not described in 'update_outbnd_queue_table' drivers/scsi/pm8001/pm80xx_hwi.c:1717: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_enable' drivers/scsi/pm8001/pm80xx_hwi.c:1735: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_disable' drivers/scsi/pm8001/pm80xx_hwi.c:4830: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_start_req' drivers/scsi/pm8001/pm80xx_hwi.c:4872: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_stop_req' drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_ha' not described in 'pm80xx_chip_reg_dev_req' drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_dev' not described in 'pm80xx_chip_reg_dev_req' drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'flag' not described in 'pm80xx_chip_reg_dev_req' drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phyId' not described in 'pm80xx_chip_phy_ctl_req' drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phy_op' not described in 'pm80xx_chip_phy_ctl_req' drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_ctl_req' drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'phy_id' description in 'pm80xx_chip_phy_ctl_req' drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_isr' drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'irq' description in 'pm80xx_chip_isr' drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'stat' description in 'pm80xx_chip_isr' Cc: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx> --- drivers/scsi/pm8001/pm80xx_hwi.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 05c944a3bdca0..abcbd47162d64 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -912,6 +912,7 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha) /** * update_inbnd_queue_table - update the inbound queue table to the HBA. * @pm8001_ha: our hba card information + * @number: entry in the queue */ static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number) @@ -948,6 +949,7 @@ static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, /** * update_outbnd_queue_table - update the outbound queue table to the HBA. * @pm8001_ha: our hba card information + * @number: entry in the queue */ static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number) @@ -1711,6 +1713,7 @@ pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha) /** * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt * @pm8001_ha: our hba card information + * @vec: interrupt number to enable */ static void pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) @@ -1729,6 +1732,7 @@ pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) /** * pm8001_chip_interrupt_disable- disable PM8001 chip interrupt * @pm8001_ha: our hba card information + * @vec: interrupt number to disable */ static void pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec) @@ -4822,7 +4826,6 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, /** * pm80xx_chip_phy_start_req - start phy via PHY_START COMMAND * @pm8001_ha: our hba card information. - * @num: the inbound queue number * @phy_id: the phy id which we wanted to start up. */ static int @@ -4864,7 +4867,6 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) /** * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND * @pm8001_ha: our hba card information. - * @num: the inbound queue number * @phy_id: the phy id which we wanted to start up. */ static int pm80xx_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha, @@ -4884,7 +4886,7 @@ static int pm80xx_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha, return ret; } -/** +/* * see comments on pm8001_mpi_reg_resp. */ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, @@ -4957,9 +4959,8 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, /** * pm80xx_chip_phy_ctl_req - support the local phy operation * @pm8001_ha: our hba card information. - * @num: the inbound queue number - * @phy_id: the phy id which we wanted to operate - * @phy_op: + * @phyId: the phy id which we wanted to operate + * @phy_op: phy operation to request */ static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, u32 phyId, u32 phy_op) @@ -4998,8 +4999,7 @@ static u32 pm80xx_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha) /** * pm8001_chip_isr - PM8001 isr handler. * @pm8001_ha: our hba card information. - * @irq: irq number. - * @stat: stat. + * @vec: irq number. */ static irqreturn_t pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec) -- 2.25.1
